Author Topic: CH Throttle Templates?? Views Hosed :( (Read 205 times)

chief- · « **on:** October 01, 1999, 07:24:00 PM »

Man do I have the CH view blue's. I can not for the life of me get any views going in my CH setup.
I have CH F16 Fighter Stick, CH Throttle and CH pedals...I have to program each one seperately...ie not hooked together, program stick, un hook, hook up throttle and program throttle, unhook mess and rehook up mess and hope it works.
Well it hasnt been, anyone have a CH Throttle (NOT A CH PRO-THROTTLE) template, so I can copy your recorded key strokes to see if Im setting the wrong keystroke sequences in throttle setup....please post here or e-mail me their template file.

and NO, CH speed keys doesnt work with my set up, it only works with the PRO setup, give me some credit before you open up the flame thrower.

thanks

UH1Chief out
450th B.G. Cottontails (ret)

hitech · « **Reply #1 on:** October 02, 1999, 08:27:00 AM »

Make sure you set views up to press and release, not just a key stroke.

HiTech

Clydew · « **Reply #2 on:** October 02, 1999, 11:03:00 AM »

Have you tried using Speedkeys from CH. Most of the stuff worked from my WB's setup, but finally made up a new ptw file for AH. Doesn't take much effort and makes things work much better. Remember to uncheck the box if you want the change to stay, or check the box if you want to hold down a key and then have it change back when you release the button.

-wilz-

janneh · « **Reply #3 on:** October 02, 1999, 11:14:00 AM »

Clydew, SpeedKeys works only for CH PRO throttle,
not CH throttle, unfortunately.

ps. chief- I sent You my template for AH.
Hope it helps.

[This message has been edited by janneh (edited 10-02-1999).]

Clydew · « **Reply #4 on:** October 02, 1999, 03:40:00 PM »

janneh, sorry wasn't aware that speedkeys only worked on prothrottle

janneh · « **Reply #5 on:** October 02, 1999, 06:04:00 PM »

hey, np

chief- · « **Reply #6 on:** October 02, 1999, 07:53:00 PM »

First off let me thank all of you for your help....I finally fixed it!

Apparently Winochiio98 doesnt like it when I go to DOS to try and program my CH Throttle, once I would send the template to the throttle, it would throw some F5's and keyup strings through the template where they didnt belong

So you can see why it would be hosed.

I solved this by programing it in my old PC with Win95 (thank goodness I still have it) and VIOLA! it works...once again thank you Pyro and especially "Janneh" Hakala whom took time to send me a template file..thank you.

UH1Chief out

chief- · « **Reply #7 on:** October 02, 1999, 07:54:00 PM »

Errr. Hitech I mean

UH1Chief