when an enemy is low (below 150 feet AGL approx) the icons for it go "under" the terrain for me. a rather odd view, and makes reading the distance impossible.
in the 205 the fuel gauge text (like A-MAIN) extends outside of the text box it is meant to be inside of.
the terrain bump mapping (i think thats what it is) around the shore batteries on some fields flickers or "strobes" from a distance of greater than 5 miles. you get close enough it smooths out gradually.
in a manned field gun tonight i was "killed" when a CV gun killed the field gun. it immedately put me in another gun on the field withough going to the tower, but that second gun i could only move up and down.
after going to the tower and back into the gun i could move... untill a shell from the CV guns hit the airfield anywhere. then the view would snap back to default and i could only move up and down. hopping back and forth from the tower to the gun resolved it each time, until the CV shell hit again. this was all at base A12 on baltic.
i have the sliders for detail about 4/5 to the max, distance to 3 miles, all boxes for mip and bump mapping and stuff checked, unlimited FPS, 1024*768 res, tried numerous settingd for texture size from 256 to unlimited. i did refresh the plane cache and restart the game each time.
the only setting i did not change was the max texture slider or whatever.. goes from 1-5 then a check box for unlimited. i dont know what that does and it is set to whatever default is.
DXDiag:
------------------
System Information
------------------
Time of this report: 5/29/2004, 01:35:00
Machine name: *****
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp2.030422-1633)
Language: English (Regional Setting: English)
System Manufacturer: MSI
System Model: MS-6380
BIOS: Version 1.00
Processor: AMD Athlon(tm) XP 1800+, MMX, 3DNow, ~1.5GHz
Memory: 768MB RAM
Page File: 119MB used, 1759MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0001.0902 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
Sound Tab 1: No problems found.
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: NVIDIA GeForce4 Ti 4800
Manufacturer: NVIDIA
Chip type: GeForce4 Ti 4800
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0280&SUBSYS_90001462&REV_A1
Display Memory: 128.0 MB
Current Mode: 1152 x 864 (32 bit) (72Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.5672 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/24/2004 10:04:00, 4274560 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 3/24/2004 10:04:00, 1895648 bytes
Device Identifier: {D7B71E3E-41C0-11CF-FA61-0AB000C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0280
SubSys ID: 0x90001462
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps:
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.
-------------
Sound Devices
-------------
Description: SB Live! Audio [E800]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0002&SUBSYS_80611102&REV_07
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.12.0001.0252 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 7/19/2002 11:47:52, 837548 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Full
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: The tests were cancelled before completing.
-------------------
DirectInput Devices
-------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: CH Pro Pedals USB
Attached: 1
Controller ID: 0x1
Vendor/Product ID: 0x068E, 0xC501
FF Driver: n/a
Device Name: Saitek X45 Flight Controller USB
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x06A3, 0x053C
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
------------------------
Disk & DVD/CD-ROM Drives
------------------------
Drive: C:
Free Space: 35.1 GB
Total Space: 57.2 GB
File System: NTFS
Model: ST360021A
Drive: D:
Free Space: 9.7 GB
Total Space: 19.6 GB
File System: NTFS
Model: WDC WD205BA
Drive: E:
Model: MITSUMI CD-ROM FX4830T!B
Driver: c:\windows\system32\drivers\cdrom.sys, 5.01.2600.1106 (English), 3/31/2003 07:00:00, 47488 bytes
Drive: F:
Model: MAT****A CD-RW CW-7586
Driver: c:\windows\system32\drivers\cdrom.sys, 5.01.2600.1106 (English), 3/31/2003 07:00:00, 47488 bytes
