I installed a new motherboard. Everything worked fine with the old set-up, and was getting in the 40's for frame rate... CPU was a 2.4 intel running at 1.8.. ram was 1 gig at 333 mhz
New board runs CPU at 2.8, now have 1 gig of 3200 ram ( main reason I switched MB was the ram) evrything works fine, running at 100+ frame rate.
Now the problem... I use old analog CH equipment. Worked fine w/old motherboard, but with the new one button inputs are very sparatic, and slow. Hit a view button and takes a second or two to see it then switchs, if it sees it at all. While its working on that input, it has trouble with other inputs. Inputs on the throttle work fine.
Any ideas?
