Author Topic: Crazy Fun(Film) (Read 753 times)

Messiah · « **on:** August 11, 2005, 04:38:50 PM »

As requested, I figured I'd post this film here because you can learn alot from this film, so here it is.
Description- I ran into zee spit dweebmaster himself, leviathn. What ensues is a crazy 5 minute TnB(of course)fight on the deck. This is such a hard and fun fight that I seriously had to take a break after it LOL.

Needless to say it was

Crazy Fun

Herbie · « **Reply #1 on:** August 11, 2005, 07:27:35 PM »

Real nice fight, thought you were going to get him Messiah.

Dead Man Flying · « **Reply #2 on:** August 12, 2005, 01:40:07 AM »

That was a fun one. Check out some of the speeds we get down to in the vertical. Nuts.

-- Todd/Leviathn

Schatzi · « **Reply #3 on:** August 12, 2005, 11:07:51 AM »

Looks like great fun to me!

>S< to both of you, superb flying. I watched in awe what you did with those spittys. Very educational.

Ty for sharing.

Eagle Eye · « **Reply #4 on:** August 12, 2005, 04:09:37 PM »

What do you need to watch this film Realplayer?

Messiah · « **Reply #5 on:** August 12, 2005, 04:12:49 PM »

Eagle Eye, this film uses the Aces High Film Viewer.

Messiah · « **Reply #6 on:** October 11, 2005, 09:32:13 PM »

bump for nomak

Nomak · « **Reply #7 on:** October 12, 2005, 11:46:59 AM »

Good film thx for posting it.

Looked to me like Levi got caught with pants down on the first merge/set up. He almost paid the price for it to. You didnt give an inch of breathing room either. His extension then remerge looked for more Levi like.

Great flying by both of you.

Dave

Balsy · « **Reply #8 on:** October 12, 2005, 12:58:43 PM »

Nomak, Messiah, Levi etc....

? on Flaps in the spits.. When do you use them (top of scissors etc..) and at what speed do you deploy them.

Also the spits have 1 setting, so are you constantly turning them on and off to keep them at a set degrees, or are you going all the way down with them.

I find the spit "hovers" at full flaps and gets quite unstable.

Appreciate your comments one and all

(Non spit flying dweeb),

Balsy

Messiah · « **Reply #9 on:** October 14, 2005, 12:12:17 AM »

Quote

Originally posted by Balsy
Nomak, Messiah, Levi etc....

? on Flaps in the spits.. When do you use them (top of scissors etc..) and at what speed do you deploy them.

Also the spits have 1 setting, so are you constantly turning them on and off to keep them at a set degrees, or are you going all the way down with them.

I find the spit "hovers" at full flaps and gets quite unstable.

Appreciate your comments one and all

(Non spit flying dweeb),

Balsy

Hi balsy, nomak, thanks for enjoying the film.

To answer your question about the spit and flaps - the only time I deploy the flaps is when I need to hold the nose up which usually happens in the rolling scissor. There is also the occasional times when I need to pull a tighter turn which most often occurs when im against other spits or planes with a better turn radius.

And the spits flaps has 1 setting which is full down so no I do not bother with increments, in fact when I deploy flaps in any plane I deploy them as far down as they can go because it usually means I need to turn NOW, and when im done I deploy them ASAP. About it being unstable at low speed, the spit especially does a move I like to call "the falling leaf" because if you get it slow enough with flaps it literally falls like a leaf. I have learned to control this stalling spin to do quick reverses which requires hard rudder control.