« previous next »
Pages: [1]   Go Down

Author Topic: X-52 question  (Read 310 times)

Offline humble

  • Platinum Member
  • ******
  • Posts: 6434
X-52 question
« on: November 17, 2005, 12:52:16 PM »
Can you program the "slider" on the throttle to the "zoom" function? If so help or program file greatly appreciated.
Logged

"The beauty of the second amendment is that it will not be needed until they try to take it."-Pres. Thomas Jefferson

Offline TMAW

  • Zinc Member
  • *
  • Posts: 98
Slider set as zoom in/out
« Reply #1 on: November 20, 2005, 08:37:35 AM »
humble I have a profile that uses the slider for zoom in and out. I e-mailed you my address, reply with your address and I'll send the profile to you.

TMAW
Logged

Offline Max

  • Platinum Member
  • ******
  • Posts: 7814
X-52 question
« Reply #2 on: November 22, 2005, 08:30:29 AM »
TMAW can you briefly describe how you did that? I used AH jstick setup for a basic set of views and commands.

DmdMax
Logged

Offline TMAW

  • Zinc Member
  • *
  • Posts: 98
X-52 question
« Reply #3 on: November 22, 2005, 10:49:03 AM »
I used the SST software that came with the stick. The slider was set to BANDS, then divided into three. I'm not sure of the percentages because I'm at work.
But I think that from 0 to 40% of the band  the zoom out key([) is set to it, the center of the band is from 40% to 60% with no key set to it, and the 60% to 100% uses the zoom in key(]).
I believe if you are going to use the SST software you'll need to delete the stick.cfg from AH.

TMAW
Logged

Offline humble

  • Platinum Member
  • ******
  • Posts: 6434
X-52 question
« Reply #4 on: November 22, 2005, 11:54:33 AM »
TMAW....

daverima@gmail.com

thanks
Logged

"The beauty of the second amendment is that it will not be needed until they try to take it."-Pres. Thomas Jefferson
Pages: [1]   Go Up
« previous next »