Author Topic: New rudder pedals  (Read 1411 times)

Offline eilif

  • Silver Member
  • ****
  • Posts: 1012
New rudder pedals
« Reply #30 on: April 29, 2006, 06:10:45 PM »
those things are solid, either you will be buried with em or they will become a family heirloom:lol

Offline nirvana

  • Platinum Member
  • ******
  • Posts: 5640
New rudder pedals
« Reply #31 on: April 29, 2006, 07:22:22 PM »
Yeah, I need to find some scrap wood and nails, been meaning to do it from day 1.  Problem is that my desk isn't set up to have your feet propped on something, it has a 8 inch wide panel right in the middle for support, might have to mod it as well...


Nice pedals too Roscoroo!
Who are you to wave your finger?

Offline 38ruk

  • Gold Member
  • *****
  • Posts: 2121
      • @pump_upp - best crypto pumps on telegram !
New rudder pedals
« Reply #32 on: April 29, 2006, 09:31:34 PM »
Is there a return spring underneath somewhere Roo , or do u just return to center manually ?  If manually how the hell do you remember to do it lol , even with the springs in the CH pedals fighting to center it back i still fly along fat, dumb ,and sideways hehe

Offline Roscoroo

  • Plutonium Member
  • *******
  • Posts: 8424
      • http://www.roscoroo.com/
New rudder pedals
« Reply #33 on: April 29, 2006, 09:34:05 PM »
hang on ill shoot ya a Secret squirrel pic ... brb
Roscoroo ,
"Of course at Uncle Teds restaurant , you have the option to shoot them yourself"  Ted Nugent
(=Ghosts=Scenariroo's  Patch donation

Offline Roscoroo

  • Plutonium Member
  • *******
  • Posts: 8424
      • http://www.roscoroo.com/
New rudder pedals
« Reply #34 on: April 29, 2006, 09:47:53 PM »


dual springs ...(stolen from Mrs Roo's lamp )  
 adj stops added
adj alum bell crank added to pot (alot easier to center pot now)

Ver 3 is gonna have the main post reversed and the handle bar head post will be removable  for different foot bars ... (these are currently ww1 style sort of )

I'm still trying different things .
Roscoroo ,
"Of course at Uncle Teds restaurant , you have the option to shoot them yourself"  Ted Nugent
(=Ghosts=Scenariroo's  Patch donation

Offline 38ruk

  • Gold Member
  • *****
  • Posts: 2121
      • @pump_upp - best crypto pumps on telegram !
New rudder pedals
« Reply #35 on: April 29, 2006, 10:08:19 PM »
NICE !   Clean design , and good craftsmanship Roo

Offline Simaril

  • Platinum Member
  • ******
  • Posts: 5149
New rudder pedals
« Reply #36 on: April 30, 2006, 07:00:44 AM »
ummm...a lamp with springs? Did Mrs Roo's light fixture used to bounce or something?
Maturity is knowing that I've been an idiot in the past.
Wisdom is realizing I will be an idiot in the future.
Common sense is trying to not be an idiot right now

"Social Fads are for sheeple." - Meatwad

Offline eilif

  • Silver Member
  • ****
  • Posts: 1012
New rudder pedals
« Reply #37 on: April 30, 2006, 10:27:50 AM »
One of my buddies built an awesome pair of pedals, he is a machinist so its pretty overboard, could probably drop it off a building and still be ok:)

there is some good tech talk in this thread that might help out as well as his pedals pic.

http://targetware.net/modules.php?op=modload&name=PNphpBB2&file=viewtopic&t=9889

Offline Roscoroo

  • Plutonium Member
  • *******
  • Posts: 8424
      • http://www.roscoroo.com/
New rudder pedals
« Reply #38 on: April 30, 2006, 11:09:42 AM »
Quote
Originally posted by eilif
One of my buddies built an awesome pair of pedals, he is a machinist so its pretty overboard, could probably drop it off a building and still be ok:)

there is some good tech talk in this thread that might help out as well as his pedals pic.

http://targetware.net/modules.php?op=modload&name=PNphpBB2&file=viewtopic&t=9889


(My Engineer lite is lite,)
they look way overboard  for a 1st desiegn . one thing i think i see is the pot is on top Correct ? and if that the case he'll have trouble getting a smooth responce line and the common part deflection ohm value that we require for our corkscrew climbs and snapshots ..

I think there a nice lookin set ,but has he hooked them up and tested them yet .
I've tried direct pot , geared pot , green pot (i didnt inhale) and bell crank style .

 bellcrank is easiest to acheive a smooth responce , geared came next but needed dual pots .
Make funtional 1st ... then start building eyecandy (thats when i'll set up the mill and run off a few sets )  What I really need is a good Electonics geek to help me set up a stand alone usb curcuit board for them . as of right now im still interfacing them thru a saitec board.(there married to a moded joystick still)
Roscoroo ,
"Of course at Uncle Teds restaurant , you have the option to shoot them yourself"  Ted Nugent
(=Ghosts=Scenariroo's  Patch donation

Offline eilif

  • Silver Member
  • ****
  • Posts: 1012
New rudder pedals
« Reply #39 on: April 30, 2006, 02:02:21 PM »
if you look through the posts on that forum tenutz has a link to the ch board you can order which allows you to do all sorts of moding, i will be ordering their largest board with like 8 pots and a  mess of buttons for an interface i will be making that will resemble one of those music boards you see at concerts, i already built a throttle system with  8 pots and 24 some odd buttons, by built i mean ductaped together a whole bunch of inyards from old tm sticks, but it works:cool:

Offline Gianlupo

  • Platinum Member
  • ******
  • Posts: 5154
New rudder pedals
« Reply #40 on: May 10, 2006, 04:01:16 AM »
Back on topic, finally Saitek released a picture of the new pedals:



From Saitek site:

« The Pro Flight Rudder Pedals are solidly constructed and feature three axis pedals which maximize flight simulator realism by enabling foot control of the rudder function.

The Pro Flight Rudder Pedals also include the following features:

    * Self-centering pedals with adjustable damping
    * Adjustable foot rests to fit all sizes, with non-slip materials
    * Fully adjustable rudder control to suit the gamer’s preferences
    * Tension adjustment to vary resistance to suit flying style
    * Advanced SST Programming
    * Toe brakes»
And here's a link to the press release: http://www.saitekusa.com/usa/info/press/Pro_flight_rudderpedals.pdf

Just one (big) trouble: a suggested price of 129.95 bucks :(

Now, RTSigma, you're there at E3: try them and tell us, CH or Saitek? :)
Live to fly, fly to live!

Offline wasq

  • Silver Member
  • ****
  • Posts: 1610
      • Photos
New rudder pedals
« Reply #41 on: May 10, 2006, 04:28:00 AM »
Quote
Originally posted by Gianlupo
(Image removed from quote.)
Did they really put a big blue LED in the middle of that donut thingy?

Saitek has gone overboard with their LEDs. The X52 is already like a Christmas tree, lighting up the whole apartment whenever plugged to the computer. Now, why would I like to have a bright blue light under my table?

Offline Charge

  • Gold Member
  • *****
  • Posts: 3414
New rudder pedals
« Reply #42 on: May 10, 2006, 04:44:36 AM »
"Now, why would I like to have a bright blue light under my table?"

You could see your d**k in a new light?

Wouldn't it be kool!  :)

Leds increase the koolness factor of a product. Those are primarily aimed for kids and the manufacturers are probably quite unavare of the age structure of the users of their products.

-C+
"When you wish upon a falling star, your dreams can come true. Unless it's really a giant meteor hurtling to the earth which will destroy all life. Then you're pretty much screwed no matter what you wish for. Unless of course, it's death by meteorite."

Offline Gianlupo

  • Platinum Member
  • ******
  • Posts: 5154
New rudder pedals
« Reply #43 on: May 10, 2006, 05:17:06 AM »
Eheheheh, wasq, yes, they put way too much lights in their products... but you can always turn them off! :) (and, I have to confess, when I play at night, in my dark rooms... I like that electric blue light :D)

I like this new pedals, especially the fact they seems to allow more room between the legs than CH ones.... but I'm really let down by the price, I hoped for something below 100 $... :(
Live to fly, fly to live!

Offline Kurt

  • Silver Member
  • ****
  • Posts: 1149
      • http://www.clowns-of-death.com
New rudder pedals
« Reply #44 on: May 10, 2006, 08:19:55 AM »
I'll have to see them in person, the photo makes them look a little fragile and chinsey.
--Kurt
Supreme Exalted Grand Pooh-bah Clown
Clowns of Death <Now Defunct>
'A pair of jokers beats a pair of aces'