Author Topic: USB problem  (Read 489 times)

Offline airbull

  • Nickel Member
  • ***
  • Posts: 547
USB problem
« on: June 19, 2001, 04:31:00 PM »
I recently built a new puter.
I can boot up & down play online etc all ok.
If I install any sort of USB device its ok running. But when I reboot after shuting down I get blue screen of death with the meessage
an exception OE has occured at 0028:F049003 in VXD... called from 0028:C1C32814 in VXD...
If I then disconect the usb device it works ok. Have updated bios & any new drivers I could find. At the moment Im just making sure I disconnect before shutdown.
spec
AMD 1.2 tb
ASUS A7a266 m/b with ALI chip
512 DDR ram
3D Prophet 4500 64ram
Windows98se
directx8a
sound blaster live

Thanks in advance.

airbull
Flying for fun
'Crashed slow-rolling near ground. Bad show'

http://www.thefewsquadron.co.uk

Offline bloom25

  • Silver Member
  • ****
  • Posts: 1675
USB problem
« Reply #1 on: June 20, 2001, 03:24:00 AM »
What USB devices are causing the problem?  Give me specifics and if I find some time I'll try researching it for you.

Offline bloom25

  • Silver Member
  • ****
  • Posts: 1675
USB problem
« Reply #2 on: June 20, 2001, 03:35:00 AM »
Ali provides a link to this for USB issues with win98:
 http://download.microsoft.com/download/win98SE/Update/4003/W98/EN-US/241134usa8.exe

It is a link to a file, so I don't know exactly what it fixes, but it's something...

Offline airbull

  • Nickel Member
  • ***
  • Posts: 547
USB problem
« Reply #3 on: June 21, 2001, 02:46:00 AM »
Tried the file already didnt do any good. The problem occures with any USB device. Tried Joystick Game voice & a Camara & they all did the same thing. They all work ok just when rebooting after shut down.??

Thanks
airbull
Flying for fun
'Crashed slow-rolling near ground. Bad show'

http://www.thefewsquadron.co.uk

Offline ROOSTER3

  • Zinc Member
  • *
  • Posts: 30
USB problem
« Reply #4 on: June 21, 2001, 06:33:00 AM »
Airbull what is your modem on pc I had the same problem when i changed to cable ... I had no cable port on tower so had to use exterior adaptor and driver screwed every thing up but after spending  a day on the phone with tech support found that usb ports dont go any where you want them to go.... high end devices must go on tower and not on hub.. dont know if that is the problem or not but just A thought good luck !!!    :confused:   :confused:   :confused:

Offline airbull

  • Nickel Member
  • ***
  • Posts: 547
USB problem
« Reply #5 on: June 21, 2001, 11:40:00 AM »
Still on dial up with a Diamond modem in the pci slot

thanks m8

airbull
Flying for fun
'Crashed slow-rolling near ground. Bad show'

http://www.thefewsquadron.co.uk