Author Topic: icmp echo request  (Read 226 times)

Offline JB88

  • Plutonium Member
  • *******
  • Posts: 10980
icmp echo request
« on: January 25, 2007, 09:06:38 AM »
i have been getting these tagged regularly by my firewall and i am wondering if this might be related to lag issues that i have been having.

also, would i be better off using a router rather than a firewall?
this thread is doomed.
www.augustbach.com  

To strive, to seek, to find, and not to yield. -Ulysses.

word.

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
icmp echo request
« Reply #1 on: January 25, 2007, 09:29:51 AM »
The ICMP ECHO message is usually from someone or something Pinging your connection.

I do not care for the consumer grade routers and I really hate software firewalls, so I am a lousy person to ask.
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline Helrazr1

  • Copper Member
  • **
  • Posts: 196
icmp echo request
« Reply #2 on: January 25, 2007, 06:42:44 PM »
I can't stand software firewalls either, but I've had some luck with hardware firewalls.  This might be a good option.  Keep your eyes peeled, and you can get them reasonably cheap.

Offline Auger

  • Nickel Member
  • ***
  • Posts: 492
      • AKs Home Page
Re: icmp echo request
« Reply #3 on: January 26, 2007, 11:41:46 PM »
Quote
Originally posted by JB88
i have been getting these tagged regularly by my firewall and i am wondering if this might be related to lag issues that i have been having.

also, would i be better off using a router rather than a firewall?


The occasional ping isn't going to cause any lag issues.  Hopefully there is a way to tell your firewall not to notify you when they happen.

I used to use a Belkin router/AP and it worked great.  It has fairly decent options for allowing traffic inbound and was quite stable.  I switched to a WRAP microPC running m0n0wall for work so I can have a dedicated VPN to the office.  But when this job ends, the Belkin will get called back to active duty.

Unless you can afford a real router (Cisco), you'll have a firewall built-in to the router.  All of the consumer routers/APs (Belkin, Linksys, Netgear, D-Link, etc.) have a firewall inside.  I prefer them over a software firewall (BlackIce, Sygate, or bundled with anti virus) for several reasons:
  • No nagging popups like "Program X wants to connect to the Internet!  Allow?"
  • Less likely to have a major security vulnerability
  • Stops layer 3 and 4 attacks before they get to the computer
  • Far fewer upgrades

Plus it's at least one fewer process sucking up resources.