Author Topic: CH Prodcut Fighterstick  (Read 566 times)

Offline coff0099

  • Zinc Member
  • *
  • Posts: 1
CH Prodcut Fighterstick
« on: June 18, 2007, 02:35:53 PM »
Any comments, good or bad regarding the CH Fighterstick product.

Offline Krusty

  • Radioactive Member
  • *******
  • Posts: 26745
CH Prodcut Fighterstick
« Reply #1 on: June 18, 2007, 02:58:05 PM »
Good: high quality, often referred to as the best precision equipment, and often lasts many years. If parts go bad can often replace just that part.

Bad: It costs more than if you bought a "normal" stick every year for 5 years. IMO has too few buttons (too many buttons-on-hats and not enough stand-alone) <- but this is just my opinion. Some parts can go bad, before the full stick.

It's up to you if you want to spend that much $$$. If CH made a setup like Saitek, but with CH quality, I'd love that. IMO Saitek doesn't have the quality/longevity, and CH doesn't have the functionality/ergonomics of the X52-type system. (this said just from observing the setups).

Offline Bruv119

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 15667
      • http://www.thefewsquadron.co.uk
CH Prodcut Fighterstick
« Reply #2 on: June 18, 2007, 03:24:49 PM »
I have CH combat stick and pedals.  They rock.


Krusty only button I need is a trigger  ;)

everything else is excessive!


Bruv
~S~
The Few ***
F.P.H

Offline Auger

  • Nickel Member
  • ***
  • Posts: 492
      • AKs Home Page
CH Prodcut Fighterstick
« Reply #3 on: June 18, 2007, 04:21:59 PM »
I have used CH sticks for about the past 10 years.  Other than pots wearing out, and Windows 2000/XP breaking the keyboard port (not CH's fault), I haven't had any issues with them.  They can be programmed a gazillion ways, work well with either the CH Control Manager or native AH2 stick mapping, and fit my hands well.  The set I have now is about 1.5 years old and is showing no signs of wear.  If and when it wears out, I'll buy another CH product to replace it.

Offline Spatula

  • Silver Member
  • ****
  • Posts: 1486
CH Prodcut Fighterstick
« Reply #4 on: June 18, 2007, 05:51:28 PM »
The Fighter stick is brilliant. Ive had both a Combat stick (analog - years ago) and a fighter stick (usb, current). Both are great sticks. The Fighter has more "buttons" - most of those "buttons" come by way of 3 4-way hats (given 12 buttons) which takes some getting used to, but its a good way of giving you loads of buttons at extremely easy reach and non-cluttered layout.
As for ergonomics, they seem fine to me. Good size for me, and easy to use.
Quality: arguably the best you can buy. Mine takes a beating year after year and still feels brand new.

Get one now!
Airborne Kitchen Utensil Assault Group

Offline DREDIOCK

  • Plutonium Member
  • *******
  • Posts: 17773
CH Prodcut Fighterstick
« Reply #5 on: June 18, 2007, 08:50:46 PM »
Fighter stick

(for me) plus's
Great overall stick. very smooth operation. more then enough buttons

Minus's

Handrest set a little too low (or buttons too high) for your average desktop user. Making the top hat difficult to reach comofortably.
minor problem and easily solved by placing a spacer of sorts on the handrest
Death is no easy answer
For those who wish to know
Ask those who have been before you
What fate the future holds
It ain't pretty

Offline Brooke

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 15549
      • http://www.electraforge.com/brooke/
CH Prodcut Fighterstick
« Reply #6 on: June 18, 2007, 10:05:52 PM »
I love CH Products gear.  It's what I've been using for about 15 years.

Offline SFCHONDO

  • Silver Member
  • ****
  • Posts: 1817
CH Prodcut Fighterstick
« Reply #7 on: June 20, 2007, 11:29:38 PM »
Quick question, how is the tension in the stick? Firm like the Thrustmaster Hotas or weak like the Saitek X52. I like more of a firm feel, I had an X45 and it wasn't bad (would of prefered a bit more tension), went to the X52 but it feels like it is made for a limp wristed guy.
        HONDO
DENVER BRONCOS    
   
  Retired from AH

Offline Spatula

  • Silver Member
  • ****
  • Posts: 1486
CH Prodcut Fighterstick
« Reply #8 on: June 21, 2007, 12:20:46 AM »
Its been a LONG time since i used anything other than CH sticks, but my last stick before a CH one was a saitek evo (one of the original ones) going back 8 years or so. IRRC, they are pretty similar in spring tension.
Airborne Kitchen Utensil Assault Group

Offline Brooke

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 15549
      • http://www.electraforge.com/brooke/
CH Prodcut Fighterstick
« Reply #9 on: July 06, 2007, 01:44:11 PM »
Quote
Originally posted by SFCHONDO
Quick question, how is the tension in the stick? Firm like the Thrustmaster Hotas or weak like the Saitek X52. I like more of a firm feel, I had an X45 and it wasn't bad (would of prefered a bit more tension), went to the X52 but it feels like it is made for a limp wristed guy.


Tension on the CH Flightstick I have is perfect, in my opinion.  Don't know how to compare it, though, as I don't know the others well.

Offline ZULU6

  • Zinc Member
  • *
  • Posts: 31
      • http://www.hdforums.com/
CH Prodcut Fighterstick
« Reply #10 on: July 08, 2007, 12:59:24 PM »
There are other products then CH?

CH USB FIGHTERSTICK
CH USB PRO-THROTTLE
CH USB PRO PEDALS

Been using them for years no problems/EVER!
:aok
ZULU6
"Get close .. when he fills the entire windscreen ... then you can't possibly miss." Erich Hartmann 352 Kills-Gruppenkommandeur Jagdgeschwader 52 Knight's Cross to the Iron Cross with Oak Leaves, Swords and Diamonds