Author Topic: How is your scaling and dampening on your X52 setup?  (Read 479 times)

Offline Hawser

  • Zinc Member
  • *
  • Posts: 16
How is your scaling and dampening on your X52 setup?
« on: July 15, 2007, 05:42:38 AM »
I am trying to fine tune my X52 setup. What scaling and dampening do you use?

Offline Mace2004

  • Silver Member
  • ****
  • Posts: 1528
      • TrackIR 4.0
How is your scaling and dampening on your X52 setup?
« Reply #1 on: July 15, 2007, 10:30:10 AM »
Mine are very straight forward as the X-52 has nice response.  I also have the Saitek rudder pedals so don't have a mapping for the twist grip.

Roll
Pitch
Yaw
Mace
Golden Gryphon Guild Mercenary Force G3-MF

                                                                                          

Offline clerick

  • Silver Member
  • ****
  • Posts: 1742
How is your scaling and dampening on your X52 setup?
« Reply #2 on: July 15, 2007, 01:03:18 PM »
Here are my stick scalings.  Though they are a constant work in progress, I'll spend a lot of time in the TA or offline working on little things that i notice.





Come to think of it i have made minor adjustments to the Y-axis to remove some slow speed bounce i was getting.  Hope this helps.

Offline shooter1cac

  • Zinc Member
  • *
  • Posts: 97
      • http://img407.imageshack.us/img407/3707/sapplf6.jpg
How is your scaling and dampening on your X52 setup?
« Reply #3 on: July 16, 2007, 06:23:38 AM »
I constantly adjust my scaling depending on what ride I'm in. My scaling looks like Cleriks when I'm in planes like the mustang or the spit to fight nose bounce.
My normal scaling is usually no scaling at all because 9 times out of 10 I'm in a 38. And yes scaling does affect how the plane handles...especially at low speeds or in a rolling scissors. But with no scaling the risk of a snap roll or some other scary situation happening at a bad time is much worse.

Stop ham fisting your controller.  :)








Course I ham fist my controller every chance I get.
It's mine..and I'll ham fist it whenever I want dangit:D

Offline clerick

  • Silver Member
  • ****
  • Posts: 1742
How is your scaling and dampening on your X52 setup?
« Reply #4 on: July 16, 2007, 03:36:07 PM »
Quote
Originally posted by shooter1cac
9 times out of 10 I'm in a 38.


99 times out of a hundred i'm in a 38  :)