« previous next »
Pages: [1]   Go Down

Author Topic: Entering Stick Setting Problems  (Read 447 times)

Offline DoNKeY

  • Silver Member
  • ****
  • Posts: 1304
Entering Stick Setting Problems
« on: October 31, 2007, 09:54:31 AM »
Hey guys, I have been trying to enter ack-acks stick settings into my saitekav8rjoystick.jsm file.  This is what it looks like.  I only entered the two lines of it it, you should be able to see where, but when I went in game and checked the scaling, they were not linear like I said they should be.  I didn't config in game tho, is that a problem?

Anyway, here is the file, where and what should I fix.  Thanks


donkey

Saitek AV8R Joystick
5,22
Y Axis
0,32767,65535,0.050000,0.100000,0.000000
AXIS,PITCH,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00  <--- I replaced that
AXIS,PITCH,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
X Axis
0,32767,65535,0.050000,0.100000,0.000000
AXIS,ROLL,0,0
AXIS,ROLL,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Slider
0,32767,65535,0.050000,0.100000,0.000000
AXIS,THROTTLE_2,0,0
AXIS,THROTTLE_2,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Z Axis
0,32767,65535,0.050000,0.100000,0.000000
AXIS,THROTTLE_1,0,0
AXIS,THROTTLE_1,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Z Rotation
0,32767,65535,0.050000,0.100000,0.000000
AXIS,YAW,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00 <---- Replaced that also
AXIS,YAW,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Hat Switch Fwd.
VIEW,LOOK_FWD
VIEW,LOOK_FWD
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Right Fwd.
VIEW,LOOK_FR
VIEW,LOOK_FR
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Right
VIEW,LOOK_RIGHT
VIEW,LOOK_RIGHT
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Right Back
VIEW,LOOK_BR
VIEW,LOOK_BR
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Back
VIEW,LOOK_BACK
VIEW,LOOK_BACK
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Left Back
VIEW,LOOK_BL
VIEW,LOOK_BL
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Left
VIEW,LOOK_LEFT
VIEW,LOOK_LEFT
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Left Fwd.
VIEW,LOOK_FL
VIEW,LOOK_FL
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 0
GLOBAL,FIRE_ALL_GUNS
GLOBAL,FIRE_ALL_GUNS
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 1
GLOBAL,FIRE_SECONDARY
GLOBAL,FIRE_SECONDARY
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 2
GLOBAL,FIRE_PRIMARY
GLOBAL,FIRE_PRIMARY
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 3
VIEW,LOOK_UP
VIEW,LOOK_UP
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 4
PLANE,TOGGLE_GEAR
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 5
PLANE,TOGGLE_GEAR
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 6
PLANE,RAISE_FLAP
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 7
PLANE,LOWER_FLAP
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 8
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 9
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 10
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 11
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 12
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 13
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Logged
2sBlind

Offline goober69

  • Nickel Member
  • ***
  • Posts: 436
Entering Stick Setting Problems
« Reply #1 on: October 31, 2007, 10:50:00 AM »
did you perhaps change the file extension so it no longer reads .jsm?
on mine the icon changed to notepad but the extension did not.

here ill post mine for the saitek 290.
make sure u didnt delete any important lines.

no mater what stick u use it should look like this with the extra lines in there.

im no expert but  this is mine i changed the roll slightly cause i like faster roll.
Saitek ST290 Pro
4,14
Y Axis
0,32410,65535,0.082000,0.172000,0.250000
AXIS,PITCH,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00
AXIS,PITCH,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00
AXIS,PITCH,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00
NOTUSED,NOTUSED,0,0
X Axis
0,32022,65535,0.090000,0.180000,0.250000
AXIS,ROLL,0,1
0.49,0.52,0.56,0.60,0.65,0.71,0.76,0.84,0.93,1.00
AXIS,ROLL,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00
AXIS,ROLL,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00
NOTUSED,NOTUSED,0,0
Z Axis
0,0,65535,0.000000,0.194000,0.250000
AXIS,THROTTLE_1,0,0
AXIS,THROTTLE_1,0,0
AXIS,THROTTLE_1,0,0
NOTUSED,NOTUSED,0,0
Z Rotation
0,32767,65535,0.079000,0.256000,0.250000
AXIS,YAW,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00
AXIS,YAW,0,0
AXIS,YAW,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00

i really hope this helps u.
Logged
flying as Marvin57
"we few we happy few,
  we band of brothers;"
W.S  Henery V

Offline LYNX

  • Gold Member
  • *****
  • Posts: 2263
Re: Entering Stick Setting Problems
« Reply #2 on: October 31, 2007, 12:42:02 PM »
Quote
Originally posted by DoNKeY
Hey guys, I have been trying to enter ack-acks stick settings into my saitekav8rjoystick.jsm file.  This is what it looks like.  I only entered the two lines of it it, you should be able to see where, but when I went in game and checked the scaling, they were not linear like I said they should be.  I didn't config in game tho, is that a problem?

Anyway, here is the file, where and what should I fix.  Thanks


donkey

Saitek AV8R Joystick
5,22
Y Axis
0,32767,65535,0.050000,0.100000,0.000000
AXIS,PITCH,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00  <--- I replaced that
AXIS,PITCH,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
X Axis
0,32767,65535,0.050000,0.100000,0.000000
AXIS,ROLL,0,0
AXIS,ROLL,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Slider
0,32767,65535,0.050000,0.100000,0.000000
AXIS,THROTTLE_2,0,0
AXIS,THROTTLE_2,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Z Axis
0,32767,65535,0.050000,0.100000,0.000000
AXIS,THROTTLE_1,0,0
AXIS,THROTTLE_1,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Z Rotation
0,32767,65535,0.050000,0.100000,0.000000
AXIS,YAW,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00 <---- Replaced that also
AXIS,YAW,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Hat Switch Fwd.
 


The Y axis is correct but you changed the "Z" axis.  Isn't that the throttle axis?  Then again I'm not familiar with your stick.  Did you check the "enable scaling" box after clicking on advanced in map sticks in "mode" 1?  Did you recalibrate in AH ?
Logged

Offline DoNKeY

  • Silver Member
  • ****
  • Posts: 1304
Entering Stick Setting Problems
« Reply #3 on: October 31, 2007, 07:38:50 PM »
I'll see if its not saved as a .jsm.  I didn't reconfigure it in the game either.  I'll try that.

FYI, the lines that are the ones that I'm supposed to put in, where like

0.10,0.20,0.30,0.40, etc.

Does anybody know just what lines I should replace with ack-acks settings?  I'll try reconfiguring in game, and seeing if z is my throttle.


donkey
Logged
2sBlind

Offline goober69

  • Nickel Member
  • ***
  • Posts: 436
Entering Stick Setting Problems
« Reply #4 on: November 01, 2007, 07:17:10 AM »
yea and make sure u have scaling enabled , it might have to be on before u can do this i dont remember exactly.
Logged
flying as Marvin57
"we few we happy few,
  we band of brothers;"
W.S  Henery V

Offline goober69

  • Nickel Member
  • ***
  • Posts: 436
Re: Entering Stick Setting Problems
« Reply #5 on: November 01, 2007, 07:23:24 AM »
Quote
Originally posted by DoNKeY
Hey guys, I have been trying to enter ack-acks stick settings into my saitekav8rjoystick.jsm file.  This is what it looks like.  I only entered the two lines of it it, you should be able to see where, but when I went in game and checked the scaling, they were not linear like I said they should be.  I didn't config in game tho, is that a problem?

Anyway, here is the file, where and what should I fix.  Thanks


donkey

Saitek AV8R Joystick
5,22
Y Axis
0,32767,65535,0.050000,0.100000,0.000000
AXIS,PITCH,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00  <--- I replaced that
AXIS,PITCH,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00  << this should read the same as the other line <<< mine does
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
X Axis
0,32767,65535,0.050000,0.100000,0.000000   {were u not changing your roll?}
AXIS,ROLL,0,0
AXIS,ROLL,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Slider
0,32767,65535,0.050000,0.100000,0.000000
AXIS,THROTTLE_2,0,0
AXIS,THROTTLE_2,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Z Axis
0,32767,65535,0.050000,0.100000,0.000000
AXIS,THROTTLE_1,0,0
AXIS,THROTTLE_1,0,0
NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Z Rotation
0,32767,65535,0.050000,0.100000,0.000000
AXIS,YAW,0,1
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00 <---- Replaced that also
AXIS,YAW,0,1
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00  {  Yaw is rudder} NOTUSED,NOTUSED,0,0
NOTUSED,NOTUSED,0,0
Hat Switch Fwd.
VIEW,LOOK_FWD
VIEW,LOOK_FWD
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Right Fwd.
VIEW,LOOK_FR
VIEW,LOOK_FR
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Right
VIEW,LOOK_RIGHT
VIEW,LOOK_RIGHT
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Right Back
VIEW,LOOK_BR
VIEW,LOOK_BR
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Back
VIEW,LOOK_BACK
VIEW,LOOK_BACK
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Left Back
VIEW,LOOK_BL
VIEW,LOOK_BL
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Left
VIEW,LOOK_LEFT
VIEW,LOOK_LEFT
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Hat Switch Left Fwd.
VIEW,LOOK_FL
VIEW,LOOK_FL
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 0
GLOBAL,FIRE_ALL_GUNS
GLOBAL,FIRE_ALL_GUNS
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 1
GLOBAL,FIRE_SECONDARY
GLOBAL,FIRE_SECONDARY
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 2
GLOBAL,FIRE_PRIMARY
GLOBAL,FIRE_PRIMARY
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 3
VIEW,LOOK_UP
VIEW,LOOK_UP
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 4
PLANE,TOGGLE_GEAR
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 5
PLANE,TOGGLE_GEAR
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 6
PLANE,RAISE_FLAP
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 7
PLANE,LOWER_FLAP
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 8
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 9
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 10
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 11
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 12
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
Button 13
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
NOTUSED,NOTUSED
{  Yaw is rudder} << this should read the same as the other line <<< mine does {were u not changing your roll?}


maybe we got this straight now.?
Logged
flying as Marvin57
"we few we happy few,
  we band of brothers;"
W.S  Henery V

Offline The Fugitive

  • Plutonium Member
  • *******
  • Posts: 17932
      • Fugi's Aces Help
Entering Stick Setting Problems
« Reply #6 on: November 01, 2007, 07:32:41 AM »
About halfway down THIS THREAD  I have the lines in color as to which is which, and what to change.
Logged
Pages: [1]   Go Up
« previous next »