Author Topic: Throttle FUBAR? X52  (Read 599 times)

Offline Rollins

  • Silver Member
  • ****
  • Posts: 1041
      • 4thFG
Throttle FUBAR? X52
« on: July 06, 2008, 02:11:58 AM »
Gents,
Logged on today, nothing out of ordinary. Hopped in my ride and noticed that my X52 throttle was now giving reversed settings.  Mind you I haven't changed anything.  Check the controller setting and full throttle reads as 0 and no throttle reads as full on the Z axis. So it's completely reversed.  I tried recalibrating, reinstalling the Saitek software (which showed the correct 0 throttle and full throttle settings), default mapping, inverting axis and remapping stick manually.  No matter what, the throttle inputs are reversed.

Any ideas or experience here?
http://www.flamewarriors.net    Here kitty kitty...

Offline Delirium

  • Platinum Member
  • ******
  • Posts: 7276
Re: Throttle FUBAR? X52
« Reply #1 on: July 06, 2008, 07:11:33 AM »
No idea how that could happen, but you can reverse the throttle in AcesHigh so it will respond appropriately.

Escape-->options-->controls-->map controllers-->pick the throttle in the list at the top-->click the throttle axis-->click advanced-->check

invert axis-->done
Delirium
80th "Headhunters"
Retired AH Trainer (but still teach the P38 selectively)

I found an air leak in my inflatable sheep and plugged the hole! Honest!

Offline bongaroo

  • Silver Member
  • ****
  • Posts: 1822
Re: Throttle FUBAR? X52
« Reply #2 on: August 04, 2008, 04:39:50 PM »
Not sure if this has anything to do with it but my x52 had lots of wonky things happening to it at first.  Turned out it wasn't getting enough power and it wasn't getting it consistantly.  This wonked up the calibrations all the time and sometimes it would just not work at all.

A USB hub with it's own power took care of all my problems.  If you don't have one I'd recommend it even if it won't fix the problem.
Callsign: Bongaroo
Formerly: 420ace


Offline Yossarian

  • Gold Member
  • *****
  • Posts: 2516
Re: Throttle FUBAR? X52
« Reply #3 on: August 04, 2008, 05:57:40 PM »
Not sure if this has anything to do with it but my x52 had lots of wonky things happening to it at first.  Turned out it wasn't getting enough power and it wasn't getting it consistantly.  This wonked up the calibrations all the time and sometimes it would just not work at all.

A USB hub with it's own power took care of all my problems.  If you don't have one I'd recommend it even if it won't fix the problem.

Seconded.
Afk for a year or so.  The name of a gun turret in game.  Falanx, huh? :banana:
Apparently I'm in the 20th FG 'Loco Busters', or so the legend goes.
O o
/Ż________________________
| IMMA FIRIN' MAH 75MM!!!
\_ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ

Offline goober69

  • Nickel Member
  • ***
  • Posts: 436
Re: Throttle FUBAR? X52
« Reply #4 on: August 05, 2008, 12:38:17 PM »
Seconded.

thirded

thoug i did turn all the led's off in the manager and it helped with my problem it didnt fix it got a new hub and good as new
flying as Marvin57
"we few we happy few,
  we band of brothers;"
W.S  Henery V

Offline titanic3

  • Persona Non Grata
  • Platinum Member
  • ******
  • Posts: 4235
Re: Throttle FUBAR? X52
« Reply #5 on: August 06, 2008, 12:21:14 PM »
  Maybe you're holding it backwards?  :rofl :D

  the game is concentrated on combat, not on shaking the screen.

semp

Offline BooBird

  • Zinc Member
  • *
  • Posts: 47
Re: Throttle FUBAR? X52
« Reply #6 on: August 06, 2008, 02:02:05 PM »
  Maybe you're holding it backwards?  :rofl :D


 :rofl :rofl :rofl  Backwards :rofl :rofl :rofl

Now that is a good place to start
If you would like to contact the Haze send an email to thehaze100@gmail.com