Author Topic: AH2140.EXE will not work at all. Windows XP  (Read 717 times)

Offline Madguns

  • Zinc Member
  • *
  • Posts: 27
Re: AH2140.EXE will not work at all. Windows XP
« Reply #15 on: July 28, 2009, 08:52:07 PM »
Thanks posting in a minute!
I like to Rocket Vulch!

Offline Madguns

  • Zinc Member
  • *
  • Posts: 27
Re: AH2140.EXE will not work at all. Windows XP
« Reply #16 on: July 28, 2009, 08:56:29 PM »
Well here it is, other than being old, anything that jumps right out?

------------------
System Information
------------------
Time of this report: 7/28/2009, 20:51:56
       Machine name: DOG-3FS3HTVL6GH
   Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp1.020828-1920)
           Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
       System Model: To Be Filled By O.E.M.
               BIOS: BIOS Date: 10/27/04 19:15:37 Ver: 08.00.09
          Processor: AMD Athlon(tm) 64 Processor 3400+,  MMX,  3DNow, ~2.2GHz
             Memory: 1024MB RAM
          Page File: 194MB used, 2267MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: /PackageInstall
     DxDiag Version: 5.03.0001.0902 32bit Unicode
I like to Rocket Vulch!

Offline gyrene81

  • Plutonium Member
  • *******
  • Posts: 11629
Re: AH2140.EXE will not work at all. Windows XP
« Reply #17 on: July 28, 2009, 08:58:25 PM »
Need the video card info that is just below what you posted.  :aok

First off...get your Windows XP service pack 3 installed...and get Direct X v 9.0c as well while you're on the Windows update site.

I'm betting you will have to update your video card drivers too...but I'll wait.
« Last Edit: July 28, 2009, 09:00:16 PM by gyrene81 »
jarhed  
Build a man a fire and he'll be warm for a day...
Set a man on fire and he'll be warm for the rest of his life. - Terry Pratchett

Offline Madguns

  • Zinc Member
  • *
  • Posts: 27
Re: AH2140.EXE will not work at all. Windows XP
« Reply #18 on: July 28, 2009, 09:00:54 PM »
Thanks for looking!

---------------
Display Devices
---------------
        Card name: RADEON 9600 SERIES
     Manufacturer: ATI Technologies Inc.
        Chip type: RADEON 9600 Series AGP (0x4150)
         DAC type: Internal DAC(400MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_0200174B&REV_00
   Display Memory: 256.0 MB
     Current Mode: 1280 x 960 (16 bit) (75Hz)
          Monitor: Plug and Play Monitor
  Monitor Max Res: 1600,1200
      Driver Name: ati2dvag.dll
   Driver Version: 6.14.0010.6444 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 4/21/2004 15:11:38, 205824 bytes
      WHQL Logo'd: n/a
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: ati2mtag.sys
    Mini VDD Date: 4/21/2004 15:11:06, 729088 bytes
Device Identifier: {D7B71EE2-0210-11CF-D76D-0A22A1C2CB35}
        Vendor ID: 0x1002
        Device ID: 0x4150
        SubSys ID: 0x0200174B
      Revision ID: 0x0000
      Revision ID: 0x0000
      Video Accel: ModeMPEG2_C ModeMPEG2_D
 Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
 D3D7 Test Result: Not run
 D3D8 Test Result: Not run
 D3D9 Test Result: Not run
I like to Rocket Vulch!

Offline gyrene81

  • Plutonium Member
  • *******
  • Posts: 11629
Re: AH2140.EXE will not work at all. Windows XP
« Reply #19 on: July 28, 2009, 09:06:48 PM »
Ok first and foremost are those Windows based updates you really need...then you need to update your video card drivers...don't use the very latest one...go 1 or 2 revs back unless they were replaced to fix major issues.
jarhed  
Build a man a fire and he'll be warm for a day...
Set a man on fire and he'll be warm for the rest of his life. - Terry Pratchett

Offline Madguns

  • Zinc Member
  • *
  • Posts: 27
Re: AH2140.EXE will not work at all. Windows XP
« Reply #20 on: July 28, 2009, 09:08:21 PM »
Downloading the service pack now and the the DirectX
I like to Rocket Vulch!

Offline Madguns

  • Zinc Member
  • *
  • Posts: 27
Re: AH2140.EXE will not work at all. Windows XP
« Reply #21 on: July 28, 2009, 09:48:06 PM »
Do I just drop all the DirectX files into the driver cache?
I like to Rocket Vulch!

Offline TequilaChaser

  • AH Training Corps - Retired
  • Plutonium Member
  • *******
  • Posts: 10173
      • The Damned - founded by Ptero in 1988
Re: AH2140.EXE will not work at all. Windows XP
« Reply #22 on: July 29, 2009, 12:41:03 AM »
you will not benefit with any drivers above the Ati Cat 4.12 drivers for this particular Videocard........

link to DirectX 9.0c

http://www.microsoft.com/downloads/details.aspx?familyid=9226a611-62fe-4f61-aba1-914185249413&displaylang=en

download it and install it.....it places the DirectX files where they need to be.........

« Last Edit: July 29, 2009, 12:44:01 AM by TequilaChaser »
"When one considers just what they should say to a new pilot who is logging in Aces High, the mind becomes confused in the complex maze of info it is necessary for the new player to know. All of it is important; most of it vital; and all of it just too much for one brain to absorb in 1-2 lessons" TC

Offline Madguns

  • Zinc Member
  • *
  • Posts: 27
Re: AH2140.EXE will not work at all. Windows XP
« Reply #23 on: July 29, 2009, 05:42:08 AM »
Well I finally got the game to load and play albeit very low frame rate.  Thanks for the help!
I like to Rocket Vulch!

Offline swoose

  • Copper Member
  • **
  • Posts: 122
Re: AH2140.EXE will not work at all. Windows XP
« Reply #24 on: July 29, 2009, 08:00:02 AM »
Madguns,
 Thanks for your service to our country. You help keep us safe so we can have the freedom we enjoy so much.
 :salute
<S> Swoose

Offline gyrene81

  • Plutonium Member
  • *******
  • Posts: 11629
Re: AH2140.EXE will not work at all. Windows XP
« Reply #25 on: July 29, 2009, 10:59:01 AM »
Well I finally got the game to load and play albeit very low frame rate.  Thanks for the help!
Madguns...if you can...set your monitor resolution to no more than 1280x1024 at 60Hz...or 1024x768 at 72 - 75Hz...then open the game and check your frame rates...should improve.

Some people have posted links to some applications that kill un needed processes on your system to improve gaming performance...you might want to install one of those as well.
jarhed  
Build a man a fire and he'll be warm for a day...
Set a man on fire and he'll be warm for the rest of his life. - Terry Pratchett