Author Topic: G940 Firmware Update Warning  (Read 7024 times)

Offline hlbly

  • Persona Non Grata
  • Silver Member
  • ****
  • Posts: 1013
Re: G940 Firmware Update Warning
« Reply #45 on: June 09, 2010, 10:06:18 PM »
My first force feedback stick was the CH FX . Best one ever it could use either API . IFORCE2 worked best imho .
FLS I see your point I ran the firmware updater and it would not run . I remind you , you are the one that brought up the "issue" I was having . The "ax to grind" is your statement . I notice also you ignore any reply that disputed that . Merely you just continue to try to belittle me . Did you try the parts of my fix you can do ? Did you adjust axis sensitivity and uncheck centering force ?

Offline FLS

  • AH Training Corps
  • Plutonium Member
  • *******
  • Posts: 11618
      • Trainer's Website
Re: G940 Firmware Update Warning
« Reply #46 on: June 10, 2010, 10:28:02 AM »
Hlbly I tried everything posted at the Logitech forums. The centering force is on even when it's not checked and the slider is on 0. There is no combination of settings that matches my pre-patch feel of the stick.

Offline hlbly

  • Persona Non Grata
  • Silver Member
  • ****
  • Posts: 1013
Re: G940 Firmware Update Warning
« Reply #47 on: June 10, 2010, 11:16:44 AM »
I will screenshot every setting I have and post them for you tonight . See if maybe we can get it working .

Offline Wagger

  • Silver Member
  • ****
  • Posts: 824
Re: G940 Firmware Update Warning
« Reply #48 on: June 10, 2010, 11:55:15 AM »
I would like to see them myself.  Over all I like the temp fix Logitech applied with the exception of the force required to move the stick during flight.  I noticed on the ground and when I go into a stall it goes limp as it should.  When the airflow over the surfaces increases I found a lot less play near center as with the old firmware.  What I am finding thought is that it does take more force once the airflow over the wings builds it does not increase proportionally with the increase of airflow.  If I go into a hard turn it is a steady force the whole time.  In a dive the pressure does not change at the airflow builds over the surfaces.  It takes the same effort at 250mph as it does at 450mph.  This is what I am hoping is fixed in the next software version.

Offline hlbly

  • Persona Non Grata
  • Silver Member
  • ****
  • Posts: 1013
Re: G940 Firmware Update Warning
« Reply #49 on: June 14, 2010, 03:06:07 PM »
I think we have pretty much the same response with our sticks a 3 month old baby is stopping me from learning how to do screen shots in windows . Teething 9 months or so early is rough . I also wanted to share my last pm from pyro . "Ok, I got a FFB hooked up and now I understand what you mean.  I'll put it on the list and try to get it done for the next version.  Is there anything else in the FFB system that bugs you?" I also made the suggestion that , trim should be done away with entirely . FFB in games is linked to sound . What sound does trim make ? I suggested that a force called airspeed replace trim . Link it to wind  sound . Make the force be rtc effect . I can't for the life of me figure how trim should effect return to center ,unless it is return to off center .

Offline FLS

  • AH Training Corps
  • Plutonium Member
  • *******
  • Posts: 11618
      • Trainer's Website
Re: G940 Firmware Update Warning
« Reply #50 on: June 14, 2010, 03:15:13 PM »
Just use ALT Print Screen for a screenshot of the active window.