« previous next »
Pages: [1]   Go Down

Author Topic: CH pro pedal width  (Read 709 times)

Offline Camel

  • Zinc Member
  • *
  • Posts: 95
CH pro pedal width
« on: September 12, 2000, 07:14:00 PM »
I noticed a few guys saying the pedals arent wide enough, as I also thought.

If you have some scrap 5/8's ply, or 1x8, you can widen the pedals fairly easily. I used 2 peices of 1x8 about 8" long. Loosen 4 of the screws on the top of the pedals(grey part)(make them stand up a bit higher) Take a circular saw and cut slots in your pieces of lumber to except the heal portion. Locate the 4 holes on the lumber by pressing them against the pedal(The screws will leave a mark) drill holes at the marks, remove the screws and fasten with longer screws.

Doesnt take that long, and you can make them more comfortable  
Logged

Offline JimBear

  • Nickel Member
  • ***
  • Posts: 677
CH pro pedal width
« Reply #1 on: September 14, 2000, 02:55:00 PM »
Nice idea Camel, sounds like I have something to play with this weekend  

BTW, while cruisin thru CHs' web site I notice that the "new drivers to support toe breaks" has been replaced with a "Toe Breaks next release"  next to AH. Anyone want to speculate on whether that means AH will build in the capability or is CH just putting it off again?
Logged

Offline hblair

  • Platinum Member
  • ******
  • Posts: 4051
      • http://www.cybrtyme.com/personal/hblair/mainpage.htm
CH pro pedal width
« Reply #2 on: September 16, 2000, 11:53:00 PM »
Thats what I hated about the CH pedals I had. Seemed they were made for a 5' tall woman.

I have a set of these Hoffmans. The width is much better....
   


[This message has been edited by hblair (edited 09-16-2000).]
Logged

Offline Exile

  • Gold Member
  • *****
  • Posts: 2045
      • http://www.simladder.com/
CH pro pedal width
« Reply #3 on: September 17, 2000, 01:43:00 PM »
Hey hblair ... what stick are you using with those pedals? I'm thinking about getting them, but I just want to make sure they are worth it. I'm using an MS Precision Pro now and also have a CH Combat Stick (USB) and a CH Fighter Stick.

Would you recommend the pedals?
Logged

Offline hblair

  • Platinum Member
  • ******
  • Posts: 4051
      • http://www.cybrtyme.com/personal/hblair/mainpage.htm
CH pro pedal width
« Reply #4 on: September 17, 2000, 04:01:00 PM »
Using them with an microsoft force feed stick. They work great, customer support is awaesome too. You deal with the guy who owns the company. I bought mine used off a guy who used to fly aces high. I couldn't get them setup just right, so I emailed Mr. Hoffman. He sent me the entire electronic mechanism *free of charge*. Said he just didn't want an unhappy customer out there. They work great now.

Yes, I would recommend them exlie...
Logged

Offline DmdBT

  • Copper Member
  • **
  • Posts: 331
      • http://www.damned.org
CH pro pedal width
« Reply #5 on: September 17, 2000, 04:55:00 PM »
And the way to contact this Hoffman fellow to look further into these pedals is....


T

Logged

Offline hblair

  • Platinum Member
  • ******
  • Posts: 4051
      • http://www.cybrtyme.com/personal/hblair/mainpage.htm
CH pro pedal width
« Reply #6 on: September 18, 2000, 09:41:00 PM »
Heres two links to reviews of them. Links to the hoffman page are on the reviews...

Sim Flight Network...
 http://www.simflight.com/reviews/r_simped.htm

Combatsimm.com...
 http://www.combatsim.com/htm/dec98/pedal-hoff.htm
Logged
Pages: [1]   Go Up
« previous next »