« previous next »
Pages: [1]   Go Down

Author Topic: host connection failed.  (Read 500 times)

Offline FearDeth

  • Zinc Member
  • *
  • Posts: 29
host connection failed.
« on: September 30, 2011, 01:06:08 PM »
i"m running a cable modem with a p4 2gb ddr...etc...the problem is not all the time but most times it will boot me out with a host connection failed message..today i had a black screen with a windows message send dont send...is there anything i can do?
Logged

Offline The Fugitive

  • Plutonium Member
  • *******
  • Posts: 18262
      • Fugi's Aces Help
Re: host connection failed.
« Reply #1 on: September 30, 2011, 04:17:08 PM »
Post the first third of the Dxdiag report.

go to Start, run, and type in Dxdiag and hit ok. It will run the report. It may ask you about drivers, just click yes and let it run. Once it finishes on the bottom right is a button to save the report. Click save and save it to your desktop, or some place you can find it. Next double click the report you just saved. It will ask you what to use to open it with, choose notepad. When it opens copy the top 3rd up to and including "sound devices" and paste it here on the boards.
Logged

Offline FearDeth

  • Zinc Member
  • *
  • Posts: 29
Re: host connection failed.
« Reply #2 on: September 30, 2011, 05:43:37 PM »

System Information
------------------
Time of this report: 9/30/2011, 18:40:54
       Machine name: COMPUTER_1
   Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
           Language: English (Regional Setting: English)
System Manufacturer: GBT___
       System Model: GBTUACPI
               BIOS: Award Modular BIOS v6.00PG
          Processor: Intel(R) Pentium(R) D CPU 3.40GHz (2 CPUs)
             Memory: 2048MB RAM
          Page File: 174MB used, 3766MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
     DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
  DirectX Files Tab: No problems found.
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
          Music Tab: No problems found.
          Input Tab: No problems found.
        Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (n/a)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
        Card name: RADEON 9200 PRO Family (Microsoft Corporation)
     Manufacturer: ATI Technologies Inc.
        Chip type: RADEON 9200 PRO AGP (0x5960)
         DAC type: Internal DAC(500MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_5960&SUBSYS_7C13174B&REV_01
   Display Memory: 128.0 MB
     Current Mode: 1024 x 768 (32 bit) (60Hz)
          Monitor: Plug and Play Monitor
  Monitor Max Res: 1600,1200
      Driver Name: ati2dvag.dll
   Driver Version: 6.14.0010.6462 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 4/14/2008 01:41:50, 201728 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: ati2mtag.sys
    Mini VDD Date: 4/13/2008 18:04:16, 701440 bytes
Device Identifier: {D7B71EE2-1A20-11CF-C56D-195CA0C2CB35}
        Vendor ID: 0x1002
        Device ID: 0x5960
        SubSys ID: 0x7C13174B
      Revision ID: 0x0001
      Revision ID: 0x0001
      Video Accel: ModeMPEG2_C ModeMPEG2_D
 Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,2) Caps=DeinterlaceTech_PixelAdaptive
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=DeinterlaceTech_PixelAdaptive
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
 D3D7 Test Result: Not run
 D3D8 Test Result: Not run
 D3D9 Test Result: Not run

-------------
Sound Devices
-------------
            Description: Realtek AC97 Audio
 Default Sound Playback: Yes
 Default Voice Playback: Yes
            Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_A0021458&REV_02
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: ALCXWDM.SYS
         Driver Version: 5.10.0000.6300 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 9/24/2008 10:40:22, 4122368 bytes
            Other Files:
        Driver Provider: Realtek Semiconductor Corp.
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 8000, 192000
Static/Strm HW Mix Bufs: 26, 25
 Static/Strm HW 3D Bufs: 26, 25
              HW Memory: 0
       Voice Management: No
 EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): No
               Registry: OK
      Sound Test Result: Not run
Logged

Offline FearDeth

  • Zinc Member
  • *
  • Posts: 29
Re: host connection failed.
« Reply #3 on: October 01, 2011, 01:42:10 AM »
well i think somebody figured it out for me,,i put my video settings to 256 no diffirence in quality, but i no longer have any problems,,thnx
Logged

Offline TequilaChaser

  • AH Training Corps - Retired
  • Plutonium Member
  • *******
  • Posts: 10173
      • The Damned - founded by Ptero in 1988
Re: host connection failed.
« Reply #4 on: October 04, 2011, 06:52:22 PM »
FearDeth,

do you have any abnomallys with your videocard?  that 9200 Pro AGP card?

your showing  video drivers from 4/14/2008   Driver Version: 6.14.0010.6462 (English)

so I am curious as to how well they are working with that older Video Card

last I knew was the best Video Drivers from ATI for these old cards was the CAT 4.12 version which supposedly worked the best.......

TC
Logged
"When one considers just what they should say to a new pilot who is logging in Aces High, the mind becomes confused in the complex maze of info it is necessary for the new player to know. All of it is important; most of it vital; and all of it just too much for one brain to absorb in 1-2 lessons" TC

Offline FearDeth

  • Zinc Member
  • *
  • Posts: 29
Re: host connection failed.
« Reply #5 on: October 04, 2011, 06:56:19 PM »
nope no problems,,just still havin probs with gettin booted from game,,last one pissed me off at 12k, in a mission,
Logged

Offline FearDeth

  • Zinc Member
  • *
  • Posts: 29
Re: host connection failed.
« Reply #6 on: October 04, 2011, 07:00:43 PM »
its super smooth,
Logged
Pages: [1]   Go Up
« previous next »