Can my pc run ah3?

[Flashart]

Been away a very long time. Had kids etc.

Hoping to find time to jump back in the cockpit.

Will my pc run the latest ah version or do I need a new cpu or anything else?

Intel Celeron g1840 haswell socket 1150

Asus Z97-A

8gb ddr3 Kingston value ram 1600mhz

Gtx 1060 3gb

Evga 600b psu

[Bizman]

You should do fine. I was going to suspect the Celeron for a potential bottleneck but it seems to outperform my E8500 which works just fine, so...

Looks like a nice balanced budget gamer with the oomph in the right place.

[Skuzzy]

Should be fine.  The only thing that might trip you up would be if you had a lot of bloatware installed.  Raw performance of the hardware should not be an issue.

[The Fugitive]

Easiest way to find out is download the game and try! The download is free as well as a number of arenas on line being free. All it takes is some time to download and install and test away!

[Flashart]

I get up to 200fps with vsync disabled but 24fps locked with it enabled.  Is it because of the tv I'm using?



https://www.sony.co.uk/electronics/support/televisions-projectors-lcd-tvs/kdl-55w905a/specifications

Edit....   never mind, I changed HDMI ports and now it's locked at 60fps 👍

[Bizman]

I get up to 200fps with vsync disabled but 24fps locked with it enabled.  Is it because of the tv I'm using?



https://www.sony.co.uk/electronics/support/televisions-projectors-lcd-tvs/kdl-55w905a/specifications

It might well be, depending on the display port you're using for your PC and the settings of the TV:

1080 / 30p (HDMI™ only) - If you use this for your PC, you've found the culprit
1080 / 60p (HDMI™ /Component) - This is what you should use for 60 FPS.
1080 / 50p (HDMI™ /Component) - And there's this one, too.

Also:
1920 x 1080, 67.5 kHz/60 Hz (Full HD model only)*

* The 1080p timing, when applied to the HDMI input, will be treated as a video timing and not a PC timing. This will affect the [System Settings] and [Display] settings. To view PC content, set [Scene Select] to [Graphics], [Screen Format]/[Wide Mode] to [Full], and [Display Area] to [Full Pixel]. ([Display Area] is configurable only when [Auto Display Area] is set to [Off].)

Not to mention that you should set the video settings of your PC to use a 60Hz refresh rate.

[Flashart]

 never mind, I changed HDMI ports and now it's locked at 60fps 👍