Author Topic: speed command  (Read 4443 times)

Offline mikeWe9a

  • Copper Member
  • **
  • Posts: 261
Re: speed command
« Reply #30 on: February 28, 2020, 04:21:13 PM »
The primary use of a speed-holding mode would be in the climb - holding a specific speed (which varies by aircraft and by the aircraft weight) will give you specific climb performance.  Either best rate (shortest time to your altitude) or best angle (useful when necessary to clear an obstacle, but not often a requirement in this game).

For most propeller driven aircraft, the two airspeeds are very similar.  In jets, the airspeed for best rate of climb is significantly higher than best angle.

Mike

Online Oldman731

  • Plutonium Member
  • *******
  • Posts: 9423
Re: speed command
« Reply #31 on: February 28, 2020, 06:30:26 PM »
The primary use of a speed-holding mode would be in the climb - holding a specific speed (which varies by aircraft and by the aircraft weight) will give you specific climb performance. 


Agreed.  Really, it's just a trim command.  Set the speed then advance throttle to climb, retard throttle to descend.

- oldman