help ! Joystick started spiking ...

[straffo]

that's the problem I have :

when I'm near full deflection I got the dreaded "don't move your control..." abomination ...

I've decided to change my stcik curves to have more "physical" feed back on my X36

But on the  Y Axis I m unable to have intermediate position
at 90% deflection I'm at the pos seen in pict 1
at 100% deflection I'm at pos seen on pict 3

But if I try to be at 95 % I got the pict 2

It happen only on the Y axis at either full up deflectio or full down deflection ...

I'm pretty lost what I'm doing bad ?

[straffo]

I tested with IL-2 and WBIII ... I've only thistrouble in AH

I'll build an application to test this tomorrow (being a programmer help sometime)

[straffo]

solved the case by restoring an old sitck.cfg

the bad stick.cfg :

0,32983,65535,0.013000,0.034000,0
0,33684,65535,0.028000,0.008000,0
0,32445,65535,0.000000,0.000000,0
0,0,65535,0.000000,0.000000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
1.00,1.00,1.00,1.00,1.00,1.00,1.00,1.00,1.00,1.00
0.04,0.07,0.12,0.17,0.22,0.28,0.34,0.41,0.47,0.54
0.13,0.23,0.35,0.47,0.57,0.67,0.77,0.86,0.94,1.00

the right stuff

0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.104000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0,32767,65535,0.050000,0.100000,0
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00
0.04,0.05,0.12,0.17,0.23,0.28,0.34,0.38,0.45,0.50
0.10,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00

can someone explain me the <> ?

[Vermillion]

Wish I could help Straffo, but I'm a CH guy.  No idea what the problem is.

Oh, and just to let you know, I'm gonna hit Pyro up for the Yak-9UT again at the Con. But just realize I'm gonna expect you to help me pay for his "bribe"

[akak]

straffo, paste these over the last three lines on your stick.cfg and see if they help.


0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00
0.45,0.49,0.53,0.57,0.62,0.67,0.73,0.83,0.93,1.00

as always, rename your original stick.cfg to stick.bak in case you need to go back to your original stick configuration.


Ack-Ack

[straffo]

Originally posted by Vermillion
Wish I could help Straffo, but I'm a CH guy.  No idea what the problem is.

Oh, and just to let you know, I'm gonna hit Pyro up for the Yak-9UT again at the Con. But just realize I'm gonna expect you to help me pay for his "bribe"

Already done twice

My first  failed my ugly American friend who was in charge of posting the Cognac (fine champagne ) bottle though it was for him
He was quite happy ... I was balanced



btw have a nice con

Next year I'll try to send something to the con so you can have a french drink
(completly forgot to do so this year )

[straffo]

Ok I found the reason I was having trouble : the last slider must be at 100 % !
Any other setting will give spike ...

HT is this the intended behaviour ?

[Vermillion]

Start saving your Euro's now Straffo, that way you can deliver the cognac in person next year

[straffo]

in fact I've the 1100 € needed ... but they will be used to pay my tax