A squadie (T2MAW) had mentioned that after reviewing many sys specs he noticed many that used the Athlon processors experienced more probs than others with AH. Is there a connection to AH and it's lag and disco probs due to these processors?
More importantly, if so is there a fix?
I thought my prob was with my conexant modem. I am unable to play even Red Alert on the net w/o huge lags and then a disco from game and then an immediate boot off the net.
Does anyone else use this modem and if so have you experienced any probs with it or the processor?
Here my specs if anyone could give some advice.
Please ask if more info is needed.
2000+ Athlon
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 1 Build 2600
System Manufacturer eMachines, Inc.
System Model L7VMM
System Type X86-based PC
Processor x86 Family 6 Model 6 Stepping 2 AuthenticAMD ~1673 Mhz
BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 5/8/2002
SMBIOS Version 2.2
System Directory C:\WINDOWS\System32
Boot Device \Device\HarddiskVolume1
Hardware Abstraction Layer Version = "5.1.2600.1106 (xpsp1.020828-1920)"
Total Physical Memory 512.00 MB
Available Physical Memory 231.52 MB
Total Virtual Memory 1.56 GB
Available Virtual Memory 1.18 GB
Page File Space 1.10 GB
Page File C:\pagefile.sys
MODEM INFO
Name Conexant SoftK56 Modem(M)
Description Conexant SoftK56 Modem(M)
Device ID PCI\VEN_14F1&DEV_2F00&SUBSYS_8D8B155D&REV_01\3&61AAA01&0&40
Device Type Internal Modem
Attached To COM3
Answer Mode Not Available
PNP Device ID PCI\VEN_14F1&DEV_2F00&SUBSYS_8D8B155D&REV_01\3&61AAA01&0&40
Provider Name Conexant
Modem INF Path oem1.inf
Modem INF Section ModemX
Blind Off X4
Blind On X3
Compression Off +DS=0;
Compression On +DS=3;
Error Control Forced +ES=3,2,4;
Error Control Off +ES=1,0,1;
Error Control On +ES=3,0,2;
Flow Control Hard +IFC=2,2;
Flow Control Off +IFC=0,0;
Flow Control Soft +IFC=1,1;
DCB
Default <
Inactivity Timeout Not Available
Modulation Bell Not Available
Modulation CCITT Not Available
Prefix AT
Pulse P
Reset ATZ
Responses Key Name Conexant SoftK56 Modem(M)::Conexant::Conexant
String Format Not Available
Terminator
Tone T
Memory Address 0xEE000000-0xEE00FFFF
I/O Port 0x0000D000-0x0000D007
IRQ Channel IRQ 16
DISPLAY
Name S3 Graphics ProSavageDDR
PNP Device ID PCI\VEN_5333&DEV_8D04&SUBSYS_0A761019&REV_00\4&26E5833C&0&0008
Adapter Type S3 P4M266, S3 Graphics, Inc. compatible
Adapter Description S3 Graphics ProSavageDDR
Adapter RAM 32.00 MB (33,554,432 bytes)
Installed Drivers s3gnb.dll
Driver Version 6.13.10.1061-13.93.29
INF File oem2.inf (S3Psddr section)
Color Planes 1
Color Table Entries 4294967296
Resolution 800 x 600 x 85 hertz
Bits/Pixel 32
Memory Address 0xED000000-0xED07FFFF
Memory Address 0xE0000000-0xE7FFFFFF
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\s3gnbm.sys (6.13.10.1061-13.93.29, 132.75 KB (135,936 bytes), 2/25/2002 5:18 AM
Thank you
ZX
