Author Topic: Targetware Open BETA  (Read 5205 times)

Offline DiabloTX

  • Plutonium Member
  • *******
  • Posts: 9592
Targetware Open BETA
« Reply #15 on: August 02, 2003, 09:32:02 AM »
NM....got it going.
"There ain't no revolution, only evolution, but every time I'm in Denmark I eat a danish for peace." - Diablo

Offline Wanker

  • Platinum Member
  • ******
  • Posts: 4030
Targetware Open BETA
« Reply #16 on: August 02, 2003, 09:38:19 AM »
Initial impressions after only 30 mins of flight time:

1. Graphics appear to be 640x480x256 colors

2. Gamma is very dark

3. Calibration of devices seems to be easy enough. Although the F4F Wildcat I'm flying drives like a brick. Not sure if my Cougar is calibrated correctly or not. Just seems "off" right now.

4. Communications via the text buffer work and is easy to use.

5. After connecting to fly online, I tried to choose to fly for the IJN, but that request was declined(by the host?), but it let me fly for the US. Interesting way to keep the numbers even, I guess.

6. I could open and close the canopy on my Wildcat, that was neat. :)

All-in-all, it's hard to give this sim a fair test with the graphics at the level they are. Unless I missed the menu to enable higher graphics res, it's too hard to read the instruments of see much of anything with the gamma so dark and the res so low.
« Last Edit: August 02, 2003, 09:41:49 AM by Wanker »

Offline Cabby44

  • Copper Member
  • **
  • Posts: 320
Targetware Open BETA
« Reply #17 on: August 02, 2003, 09:45:01 AM »
Bax, i think you have to use the "TW Config. Utility" to get your display right...

C.

Offline Badger

  • Copper Member
  • **
  • Posts: 153
      • Military Surplus Collectors Forums
Targetware Open BETA
« Reply #18 on: August 02, 2003, 09:51:05 AM »
What's that old expression? .... You can lead a horse to water, but..... :D

Targetware User's Guide[/url]

Quick Start Guide[/url]

The Configuration Utility for the Targetware Engine[/url]

Although I haven't seen it in over 7 months, pretty nice docs for those that will take the time to read them. ;)

Congratulations to the entire Targetware development community....

Regards,
Badger
« Last Edit: August 02, 2003, 09:53:23 AM by Badger »

Offline Dune

  • Silver Member
  • ****
  • Posts: 1727
      • http://www.352ndfightergroup.com/
Targetware Open BETA
« Reply #19 on: August 02, 2003, 09:52:47 AM »
Cabby's right (far-right? ;)), the config file will let you change the graphics settings.  And I agree, the game is somewhat dark.

BTW, if you use the F3 key, you can get a head's up display of sorts.  It'll help although I don't think they plan on leaving it in there permenently.

Offline Wanker

  • Platinum Member
  • ******
  • Posts: 4030
Targetware Open BETA
« Reply #20 on: August 02, 2003, 10:06:08 AM »
Quote
Originally posted by Cabby44
Bax, i think you have to use the "TW Config. Utility" to get your display right...

C.


Ah, ok. Thanks Cabby, I'll try that. I seem to have missed all that nice TW documentation, too. I'll have to RTFM then come back with more comments. :)

Offline Badger

  • Copper Member
  • **
  • Posts: 153
      • Military Surplus Collectors Forums
Targetware Open BETA
« Reply #21 on: August 02, 2003, 10:23:58 AM »
These might help a few of the newer virtual pilots... :D

Basic Engine Operations[/url]

Getting off the ground[/url]

Getting back on the ground[/url]

Typical Pilot's Handbook[/url]

Understanding aircraft instruments[/url]

All found HERE[/url]

Regards,
Badger

Offline Wanker

  • Platinum Member
  • ******
  • Posts: 4030
Targetware Open BETA
« Reply #22 on: August 02, 2003, 10:28:22 AM »
Graphics are very very nice!

1600x1200x32@85hz 4xAA 8xAF  3.0 Gamma =  WOW!  :)

That config.txt file is pretty darn nifty.

Offline Mini D

  • Parolee
  • Platinum Member
  • ******
  • Posts: 6897
      • Fat Drunk Bastards
Targetware Open BETA
« Reply #23 on: August 02, 2003, 11:33:33 AM »
How big is the Target Rabual mod?

MiniD

Offline Furball

  • Plutonium Member
  • *******
  • Posts: 15781
Targetware Open BETA
« Reply #24 on: August 02, 2003, 11:38:30 AM »
*#!!*## :mad: :mad:

Spent AGES downloading that target rabul mod, right near the end  (i had it minimised) i go to restore it and must have accidently clicked cancel and i have to start over again.




:mad:
I am not ashamed to confess that I am ignorant of what I do not know.
-Cicero

-- The Blue Knights --

Offline Ack-Ack

  • Radioactive Member
  • *******
  • Posts: 25260
      • FlameWarriors
Targetware Open BETA
« Reply #25 on: August 02, 2003, 12:01:51 PM »
Does the Rabaul mod start in the air like the Korea one?  Haven't tried Rabaul yet but so far not impressed after trying Korea.


ack-ack
"If Jesus came back as an airplane, he would be a P-38." - WW2 P-38 pilot
Elite Top Aces +1 Mexican Official Squadron Song

Offline Rutilant

  • Silver Member
  • ****
  • Posts: 1352
Targetware Open BETA
« Reply #26 on: August 02, 2003, 12:06:11 PM »
Heya Furb :)

klutz ;)

Offline Rutilant

  • Silver Member
  • ****
  • Posts: 1352
Targetware Open BETA
« Reply #27 on: August 02, 2003, 12:08:17 PM »
Well, the graphics are nice, and the aircraft you can choose looks appealing..  (no spit if i'm forced to fly axis)

Downloadin

Targetware kinda a  funky name for a ww2 MMOG flightysimmy
« Last Edit: August 02, 2003, 12:11:48 PM by Rutilant »

Offline Russian

  • Gold Member
  • *****
  • Posts: 2992
Targetware Open BETA
« Reply #28 on: August 02, 2003, 12:37:44 PM »
DL it now, I'll post screenies later........... if it stays long enough on my hard drive. :)

Offline Cabby44

  • Copper Member
  • **
  • Posts: 320
Targetware Open BETA
« Reply #29 on: August 02, 2003, 12:40:28 PM »
Bah. Screw it.

I justed wasted 2 1/2 hours trying to get my all CH USB Hotas(Pro Throttle-Pro Pedals-F-16 FighterStick)to work in TargetKorea. I tried using 3 separate controllers, tried combining them as one controller, even loaded my CH ControlMgr WBIII file to see if it would at least control the various axis.

As soon as i try to "fly" in a offline mission i get my view shoved into the cockpit floor, the engine won't respond, no pitch or roll control, and i have to Ctl Alt Delete outta the game 'cause I AM GOING TOO SLOW TO BAIL OUT.

I screwed-up my joystick txt and input. txt files(i failed to back them up like an idiot) trying to rename various controller assignments and axis outta frustration.

If someone can email me a CH CntrlMgr file and how i can restore my config and input files before i hit "Uninstall Targetware" i would appreciate it. I searched the TW Forums and couldn't find anything.

One other thing. I selected "Highest" Graphic Settings, used the TW Utility and ticked off all the compression and texture setting boxed and the game crashed. I de-selected some of the compression settings and the game would run but i hated the look of the game, particularly the flat-as-a-pool-table terrain.

ASUS A7N-8X Nforce 2 Mobo
AMD Barton 2800+
ATI Radeon 9700 Pro
WinXP Pro
512 MB Corsair PC3500 RAM
DX9.0a

All latest drivers and runs every game i play from WBIII to RavenShield to NR2003 at the HIGHEST settings flawlessly.

P.S.

Configuring gamecontrollers with the "CH ContolMgr" and for FlightSims in general is a royal pain in the ass.....

Cabby