Author Topic: Probably a dumb question, but... (Read 423 times)

DiabloTX · « **on:** September 04, 2003, 03:00:00 PM »

I need to reverse the stereo channels in my headset without reversing it for the PC speakers. I tried looking for this in the sound configuration from the kneeboard but could not find it. Thanks in advance!!

Eagler · « **Reply #1 on:** September 04, 2003, 03:12:49 PM »

turn your headset around

DiabloTX · « **Reply #2 on:** September 04, 2003, 03:30:46 PM »

Would have already done that but it puts the headset wire across my keyboard and makes keyboard access terrible.

Roscoroo(work) · « **Reply #3 on:** September 04, 2003, 03:58:25 PM »

is your headset connected to a front header plug in on the front of your pc ???

and if so you could go inside trace its wires and switch the blue/green wire around in the connector that plugs into the mb /or soundcard.. ( note the colors may be different)

SKurj · « **Reply #4 on:** September 04, 2003, 06:04:39 PM »

Could try just cutting the wires and splicing em in the other way around +)

The wires from the plug to the headset +Q

There isn't a simple non-destructive solution I don't think

SKurj

DiabloTX · « **Reply #5 on:** September 04, 2003, 06:49:46 PM »

LOL, ok. I'll just switch the headset like Eagler said. Its quicker and less destructive if a little inconvieniant.

SKurj · « **Reply #6 on:** September 04, 2003, 10:50:50 PM »

Hey!!

why not reverse the stereo sound, and then put your left speaker on the right side and vice versa...

Then u get reversed headphones, and normal speakers +)

SKurj

DiabloTX · « **Reply #7 on:** September 07, 2003, 01:04:56 AM »

Skurj, that makes way too much sense.

But...I think it will work!!

rc51 · « **Reply #8 on:** September 07, 2003, 03:35:59 AM »

Quote

Originally posted by Eagler
turn your headset around