Aces High Bulletin Board

General Forums => Hardware and Software => Topic started by: Max on April 18, 2020, 09:09:50 AM

Title: auto take-off not working
Post by: Max on April 18, 2020, 09:09:50 AM

I have auto take-off enabled in prefs. Lately, when launching onto the runway, something's disabling it and I veer off depending on pro torque. What's causing this? Joystick spiking? I've tried calibrating and it doesn't help.

Title: Re: auto take-off not working
Post by: The Fugitive on April 18, 2020, 10:37:12 AM

One of your control inputs are spiking. Check all, rudder and joystick axis. Bump up the dead band a bit should cure it unless you have one axis that is really going bad.

Title: Re: auto take-off not working
Post by: SNO on April 18, 2020, 08:01:11 PM

My toe brakes on my CH pedals was my problem with this issue.

Title: Re: auto take-off not working
Post by: Bizman on April 19, 2020, 02:59:18 AM

Checking the spiking of the stick and adding dead band if necessary is a good advice.

Also check that your mouse isn't acting as a flight controller!

Title: Re: auto take-off not working
Post by: Max on April 19, 2020, 08:11:46 AM

Did a recalibration in Windows, added a bit of deadband to the CH Peds and finally a recalibration in-game. Seems to be better now. Thanks for the tips  :salute

Title: Re: auto take-off not working
Post by: The Fugitive on April 19, 2020, 09:22:02 AM

Quote from: Max on April 19, 2020, 08:11:46 AM

Did a recalibration in Windows, added a bit of deadband to the CH Peds and finally a recalibration in-game. Seems to be better now. Thanks for the tips  :salute

 :aok