Aces High Bulletin Board
General Forums => Aces High Classifieds => Topic started by: 1701E on September 17, 2013, 07:40:48 PM
-
Being that this stuff has been sitting around without use for quite some time and I know a few here still use older gen parts it may be worth while. It's all free to a good home;
LGA 775
Intel Core 2 Duo
E7400 2.8GHz
(http://i682.photobucket.com/albums/vv181/Xcelsior1701/Computer/For%20Sale/IMG_2353.jpg)
Heatsink included; Pic (http://i682.photobucket.com/albums/vv181/Xcelsior1701/Computer/For%20Sale/IMG_2354.jpg~original) & Pic (http://i682.photobucket.com/albums/vv181/Xcelsior1701/Computer/For%20Sale/IMG_2355.jpg~original)
DDR2 RAM
OCZ Platinum Edition
2GB (2x 1GB) / PC2 6400 (DDR2 800)/ 4-4-4 @ 2.1v
(http://i682.photobucket.com/albums/vv181/Xcelsior1701/Computer/For%20Sale/IMG_2356.jpg)
Transcend
2GB (2x 1GB) / PC2 6400 (DDR2 800)
(http://i682.photobucket.com/albums/vv181/Xcelsior1701/Computer/For%20Sale/IMG_2360.jpg)
Gigabyte GA-EP45-UD3R ATX Motherboard (http://www.gigabyte.us/products/product-page.aspx?pid=3013#ov)
Socket LGA 775
4x DDR2 DIMMs
3x PCI-E x1 slots / 1x PCI-E x16 slot / 3x PCI slots
On-board 7.1 Audio
No on-board Video
(http://i682.photobucket.com/albums/vv181/Xcelsior1701/Computer/For%20Sale/IMG_2358.jpg)
It's all been used for several years by a light user with no overclocking.
<S>
X
-
I could really use those right now bud. :salute
-
Just need a location and what all ya need via PM and I'll get it out asap.
Sounds a bit urgent, hope nothing too serious happened.
:salute
X
-
All parts* shipped out.
*Gigabyte Motherboard
*Intel E7400 + Heatsink
*OCZ Platinum DDR2
*Transcend DDR2
<S>
X
-
should Run AH ok with a decent gfx card,
my processor is the slower model of that one!
-
My kids' PC was destroyed during my move last week, so this will be a big help getting them back up & running. At 6 & 7 they are already gamers & YouTube heads. Thanks again so much bro. I'm set except for a vid card, and they don't need anything new or fancy, that's for sure.
Question: The RAM is of two different brands. I know you are not supposed to, but will I be able to use them together? In other words, are they the same ratings, just with different brand names?
BTW, I'll just be putting Windows XP on this machine, so if I can only use one type of the RAM I should still be good to go. They just play games for young kids and some learning programs, nothing CPU or GPU intensive at this time.
:salute and :cheers:
-
You should be OK to stick the lot in! - Just make sure you follow the motherboard manual regards fitting pairs, probably one pair in the yellow slots and the other pair in the red. If you use a 32bit Windows XP (the most common version!) then you will only see about 3.5GB.
-
Being that the brand is the only difference they should work together fine. I think if they ran at different speeds it would just down-clock the faster one to match, but in this case both are 800 anyways.
I never actually used them together so I'm going off how DDR3 works. :)
<S>
X