Aces High Bulletin Board
General Forums => Open Beta Test => Topic started by: Skuzzy on April 08, 2016, 10:59:33 AM
-
New version up (http://bbs.hitechcreations.com/smf/index.php/topic,378678.0.html)!
Please use this thread to post issues/bugs with the Beta 16 release of Aces High III. Thank you!
-
I will download and test tonight. Glad the progress is being made. I hope my VOX problem goes away too. Looking forward to the finished game, looking really nice Skuzzy! :rock
HamrDown
-
Greebo's CraterMA:
Noticed a continuous intermittent dark flashing. In the air I could see that the shadows of the clouds jumped forth and back. It happened every second or two like flash... flash... flash-flash... ... flash... Very epileptic, I'd say. This was at
-235255,993,143452,0.2,5.3,-0.7
craterma
FOV = 50.5
Also, the Mollen Insulation Co. still hasn't learned how to spell Liaison.
Another thing I noticed in the tower was that the desk doesn't like to be inspected too close, see image.
-
Just downloaded Beta 16 patch; computer froze when I tried to access. Tried multiple times with same result. Deleted Beta from system, re-downloaded and installed with same result. I don't play much, but am trying to keep up with you're progress. Just thought you'd like to know.
-
4096 Mode
GTX 760 2G
Detail slider - On my gunnery terrain with a 4000ft rock sugar loaf next to the airfield, heavy trees and town, and additional rock cliffs near by. Normal FPS on the runway 40-42. Some places in the air 30's, other wise 50's-60. Pulling detail slider full left, gains back 10 fps. Full right loss of 10 fps in some places and capped 30-40's.
Waffle - Noticed the new shore battery object..... :O
Gunsights - The Me410 pilot position is not the primary gunsight affected by moving the alpha slider while in flight. It is the gunsight corresponding to using the "3" key to jump to that rear position. When adjusting the "3" position gunsight, all other gunsights stay how they were adjusting while in the tower. Gunsight selection app shows only a single position to select gunsights for labeled Pilot.
Note about gunsights: If the mask on the reflector plate is too dark, up your gamma by 1-4 which will clear it up appreciably and make 12 noon more realistic.
Terrain Editor - Map bmp made previous to beta16 discriminated between elevations above sea level and those below sea level. Beta16 map bmp no longer discriminates in the same manner. I have attached a pre beta16 map and a beta 16 map.
Clipboard - It took a number of times resizing the clipboard while in flight for the size change to stay persistent in the clip board size configuration file. The new movable displays work as intended.
-
Loaded with no problem.
-
Bomber engine sounds keep dropping in and out just after takeoff. Tried Ju88, B17 and Boston. Fighters that I have tested so far including P-38 does not have this problem.
-
When in the f4u4, looking at the e6b, turning wep on and off, it looks like the time remaining is backwards. With wep on, I was getting a higher time remaining than with wep off.
-
Events arena tab, when trying to enter Axis V Allies, terrain download error crashes program. Screenies attached.
Problem signature:
P1: ahbeta.exe
P2: 0.0.0.0
P3: 5707b7ee
P4: ahbeta.exe
P5: 0.0.0.0
P6: 5707b7ee
P7: c0000005
P8: 0015dd99
P9:
P10:
-
When in the f4u4, looking at the e6b, turning wep on and off, it looks like the time remaining is backwards. With wep on, I was getting a higher time remaining than with wep off.
That's is correct. It's gets better mileage due to its type of wep. Happens in ah2.
I think it's the only plane in Ah that wep doesn't kill gas lol
-
Anybody else able to use the analog "Gun Sight" in tanks? It works for me in AH2 but not in Beta.
-
Was running 15 fine yesterday
16 crashes on arena load
craterma arena load windows crash errors are
Problem signature:
Problem Event Name: APPCRASH
Application Name: ahbeta.exe
Application Version: 0.0.0.0
Application Timestamp: 5707b7ee
Fault Module Name: ahbeta.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 5707b7ee
Exception Code: c0000005
Exception Offset: 0015b94e
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e 789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e 789
-
Are you guys deleting and reloading the whole game after each update?
My speeds are so low, I leave it and come back. When I get back, it's asking me to download the next patch, 8, 9, 10. At this rate it will taker me most of the day.
Will I lose all ah3 settings if I just delete ah3 and then load the new version?
I thought I remembered a hitech person was saying the settings should not be copied over. Or was that ah2 to 3?
Thanks
-
Was running 15 fine yesterday
16 crashes on arena load
craterma arena load windows crash errors are
Problem signature:
Problem Event Name: APPCRASH
Application Name: ahbeta.exe
Application Version: 0.0.0.0
Application Timestamp: 5707b7ee
Fault Module Name: ahbeta.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 5707b7ee
Exception Code: c0000005
Exception Offset: 0015b94e
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e 789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e 789
Me too. First time ever for this type of crash. It blows up on the off-line path as well.
:salute
-
Clipboard has moved to the center of the screen in the tower and hangar and can't be moved.
White convergence lines still barely visible with shadows off.
And please explain what the Fixed Plane Depth and Fixed Plane Size do. Must have been sleeping during the lesson.
(http://i343.photobucket.com/albums/o460/caldera_08/1.jpg~original) (http://s343.photobucket.com/user/caldera_08/media/1.jpg.html)
When taking a screenshot in AH3, my frame rate doesn't drop as it does in AH2. That's nice, but there is no way of knowing if a picture was taken. One of the screenshots I tried to take wasn't in the folder when I checked.
Can you put a "Screenshot taken" message in the text buffer after a successful attempt?
-
Probably been mentioned but just in case it said patch failed because of this F:\Hitech Creations\Aces High Beta Game\ahskview.exe'
contained the pattern of 'HEUR/APC (Cloud)' [heuristic]\\
From Avira, but it looked like it loaded anyway and started just fine
-
Clipboard has moved to the center of the screen in the tower and hangar and can't be moved.
White convergence lines still barely visible with shadows off.
And please explain what the Fixed Plane Depth and Fixed Plane Size do. Must have been sleeping during the lesson.
The FIXED have to do with VR Head sets only. Mouse over it should give you a description.
When taking a screenshot in AH3, my frame rate doesn't drop as it does in AH2. That's nice, but there is no way of knowing if a picture was taken. One of the screenshots I tried to take wasn't in the folder when I checked.
Can you put a "Screenshot taken" message in the text buffer after a successful attempt?
Ill put in a camera click sound.
HiTech
-
In a gun position bombers, f3 mode, clip board lower right hand corner, if you hit zoom the clipboard will zoom out to the middle of the screen, hitting zoom clip board remains in the middle of the screen, you will need to move it back to your orginal location, in my case lower right .
I do not know is this is a bug or by design,
Just reporting.
DHawk
-
Download worked fine.
Tried to get into AvA arena. Received message "Problem occurred while retrieving ah3terr/0x00029000.res." Game stopped working and had to be terminated with extreme prejudice.
I figure this was just that the maps weren't loaded. Special events arena loaded fine.
- oldman
-
having the same issue as oldman getting into the AH3 AVA. see screenshots attached.
had the blksea terrain up in the AVA for Thursday night tank fights.
loads offline just fine, but going into the AVA is when it crashes
renamed blksea.res, created a custom arena and used the blksea terrain. reloaded Blksea terrain. loaded arena fine.
will not allow entry into the AVA. someone(skuzzy?) needs to reset the AVA
-
Updated Beta Patch 15 to 16 w\o problems.................
But when I went in Video Settings the game recognized my Fury X vid card but couldn't set itself to native res of 2560 x 1440. After setting this manually then trying to go into the CraterMA arena I got the "ahbeta.exe stopped working" dialog box. 3 finger salute to clear this.
Rinse & repeat.
Appears that the Beta can't read & save the res of my monitor thru the vid card drivers. This was working just fine w\ Beta 15 (I did a full install of it as I have upgraded my box & did a clean install of Win 7 HP x64 SP1) but this started upon patching w\ the Beta 15 to 16 patch.
Deleted Beta, reinstalled Beta 15 full install then reran Beta Patch 15 to 16..........got the exact same results as before.
D'lding the Beta 16 full install now........................
FYI.........................
:salute
-
hung against a tree can not move
-273071,544,1037969,24.2,-2.8,-116.9
blksea
FOV = 50.5
143022,633,-320733,-0.1,3.5,-39.5
craterma
FOV = 50.5
-
Tried changing video settings...seems I am unable to....set to 4096 and 84 FOV
it allowa the change but doesn't change....
after trying change log in to a smaller screen (sides are blacked out) and text on clipboard unreadable
thought it was an issue with changing size so went back in to change video size which is how I found that there were no changes made so to speak but something happened.....
So I changed settings and totally quit out...tried to restart....got a windows message aces has stopped looking for problem...and hung there....had to reboot
-
Wiped & installed Beta 16 Full install..................
Got the exact same issue as w\ the patch so I wiped it as well.............
AHII loaded up & runs OK.
Waiting...................... ..
:salute
-
Patch 16 downloaded and installed fine. When I try to run it I get an immediate fatal error:
"The procedure entry point InitializeCriticalSectionEx could not be located in the dynamic link library KERNEL32.dll."
AH2 still works fine (as do all of my other programs).
E8400, 8GB RAM, HD7870 2GB GPU, WinXP 32 bit.
-
Resizing the Splash Screen messes up the Clipboard. The Quit Button etc then displays in the wrong place - see jpg
-
I changed video setting.
Click OK
but no changed
-
Probably been mentioned but just in case it said patch failed because of this F:\Hitech Creations\Aces High Beta Game\ahskview.exe'
contained the pattern of 'HEUR/APC (Cloud)' [heuristic]\\
From Avira, but it looked like it loaded anyway and started just fine
No, the patch failed due to your anti-virus false triggering. You pretty much need to install the entire game now as your skin viewer is now out of sync with the patches and all patches after this one will fail.
-
The FIXED have to do with VR Head sets only. Mouse over it should give you a description.
Ill put in a camera click sound.
HiTech
Thanks. :cheers:
Here are two screenshots showing the problem with convergence lines disappearing. One has shadows enabled and one disabled.
Clipboard still in center of screen after re-logging and can't be moved or resized.
FOV setting can be changed but remains at 74 and auto set fov setting.
Also, it would be a good idea to move the "Web Page Help" and "Quit" buttons to the bottom of the in-game clipboard to prevent inadvertent clicking and the resulting :bhead
-
Patch 16 downloaded and installed fine. When I try to run it I get an immediate fatal error:
"The procedure entry point InitializeCriticalSectionEx could not be located in the dynamic link library KERNEL32.dll."
AH2 still works fine (as do all of my other programs).
E8400, 8GB RAM, HD7870 2GB GPU, WinXP 32 bit.
Thank you very much Oculus.
HiTech
-
I am also getting the crash on arena load, with all arenas. Win 10 shows the "ahbeta.exe has stopped working" pop-up. Patch 15 was OK. This is new to me with patch 16.
http://kenshelby.us/files/DxDiag.txt (http://kenshelby.us/files/DxDiag.txt)
-
I am also getting the crash on arena load, with all arenas. Win 10 shows the "ahbeta.exe has stopped working" pop-up. Patch 15 was OK. This is new to me with patch 16.
http://kenshelby.us/files/DxDiag.txt (http://kenshelby.us/files/DxDiag.txt)
Does off line work?
HiTech
-
Beta patch 15 worked great. Update to patch 16...Appcrash...no off or online...Unistalled patch 15, reinstalled 16 twice. Same result, Appcrash. AH2 still works fine. Not just a Win 10 thing. OS is Win 7 Pro. :(
-
This is my dxdiag. :)
-
Beta patch 15 worked great. Update to patch 16...Appcrash...no off or online...Unistalled patch 15, reinstalled 16 twice. Same result, Appcrash. AH2 still works fine. Not just a Win 10 thing. OS is Win 7 Pro. :(
Also try to delete you settings folder.
HiTech
-
Crash to desktop on Beta 16. Updated from Beta 15 first and it crashed in two arenas CraterMa and Head to Head.
Then downloaded full install and installed fine but when selecting any arena, on-line or offline it crashes back to desktop. Beta 15 was fine as were all other issues.
AH2 still running fine :)
-
Thank you very much Oculus.
HiTech
HiTech: Maybe it's time to give up support for WinXP; MS did long ago and no one should expect XP support any more. Support for VR is way more important than support for luddites like me that still run XP.
-
HiTech: Maybe it's time to give up support for WinXP; MS did long ago and no one should expect XP support any more. Support for VR is way more important than support for luddites like me that still run XP.
Have been considering it.
I hope to have the DX11 port done next week.
HiTech
-
Does off line work?
HiTech
Sorry, but no. Same result with offline. And removing the "settings" folder has no effect.
-
Sorry, but no. Same result with offline.
Can you post the fault offset please?
HiTech
-
Yep, same problem
-
Tried removing settings folder several times and always the same APPCRASH. Uninstalled "16" and reinstalled it two more times. Same crash during several attempts both on and offline. I guess I'll try again with the next update unless a fix is found sooner.
-
im able to use offline terrains and im able to get into the SEA, but I cant get into the AVA still.
-
I am also getting the crash on arena load, with all arenas. Win 10 shows the "ahbeta.exe has stopped working" pop-up. Patch 15 was OK. This is new to me with patch 16.
http://kenshelby.us/files/DxDiag.txt (http://kenshelby.us/files/DxDiag.txt)
I'm having the same experience with Windows 7/64. As soon as I select offline or select an online arena the game freezes and I get the same message. Had no problems with 15. I've tried it about 8 times. AH2 runs fine.
Hate the idea of having to download the whole thing and start over.
-
Beta 16 killed my AH beta as well, it failed at the end of the install once I clicked "close" after it finished, and once I try the boot icon/exe, it fails and gives an error as well. Redownloading the entire beta from the homepage and will try a fresh install and see if that works.
edit - redownloaded the latest version from the homepage, tried installing it on 2 different drives, it installs, but when I try to launch into offline or online arenas, it immediately crashes and gives me an error message.
edit2- messed around some more, when I copied my settings folders over, then tried offline, it still crashed, then I tried online again, and it let me into the MA beta arena. After that it works offline now.
-
Please post the fault offset of your crashes.
HiTech
-
Please post the fault offset of your crashes.
HiTech
I would if I knew what a fault offset was.
-
Flew Yak9T, Typhoon, 109G6, 51D and the old 202. All worked fine, except that the rear view on the 51D still is blocked by the headrest. View from the G6 is best ever, everyone will be flying that plane for the views.
Good fights this night.
- oldman
-
Beta patch 15 worked great. Update to patch 16...Appcrash...no off or online...Unistalled patch 15, reinstalled 16 twice. Same result, Appcrash. AH2 still works fine. Not just a Win 10 thing. OS is Win 7 Pro. :(
I'm puzzled. Is it possible to just uninstall one of the patches or does this mean that you uninstalled the the entire AH 3 Beta and then installed the full beta 16 version? I would prefer not to download the entire beta and reinstall it if possible since with my internet connection it takes several hours.
If the entire beta needs to be uninstalled and the full beta 16 downloaded and installed is there a process that needs to be followed other then uninstalling AH beta in control panel and then downloading and installing the full beta 16? I've enjoyed AH3 so far and I would like to get back to it with a minimum of frustration. I may just wait for the next update or final product.
Obviously everyone is not having this problem. Is it possible there will be fix in the next patch without requiring a complete reinstall?
-
I can't change FOV and texture size.
-
From BETA Event in SEA tonight...
It seems that mass Air Spawning of Bomber formations causes confusion for Drones on who to latch onto. The Drones seemed to bounce from the closest player in my view. So 1 view, 68Falcon had all the drones and no one else did, and another view they would all bounce to 68Cactus. It was being reported by everyone involved including the enemy. We had about 8 formations or more.
Later, I spawned behind Dhawk and it was just me and him, it didn't seem to be an issue.
(http://i205.photobucket.com/albums/bb180/ralphmunnich/ahss18_1.jpg) (http://s205.photobucket.com/user/ralphmunnich/media/ahss18_1.jpg.html)
(http://i205.photobucket.com/albums/bb180/ralphmunnich/ahss17.jpg) (http://s205.photobucket.com/user/ralphmunnich/media/ahss17.jpg.html)
-
Now that's what I'd call tight formations!
-
Please post the fault offset of your crashes.
HiTech
Faulting application name: ahbeta.exe, version: 0.0.0.0, time stamp: 0x5707b7ee
Faulting module name: ahbeta.exe, version: 0.0.0.0, time stamp: 0x5707b7ee
Exception code: 0xc0000005
ahbeta.exe
0.0.0.0
5707b7ee
ahbeta.exe
0.0.0.0
5707b7ee
c0000005
0015b94e
f80
01d19271f77b1df6
C:\Hitech Creations\Aces High Alpha Game\ahbeta.exe
C:\Hitech Creations\Aces High Alpha Game\ahbeta.exe
f99433ab-fa3c-4571-be86-3fc3713a7e25
Hope that helps :)
-
I have noticed that in the hangar, the panther is shown with a 75mm gun. Is that correct? Also I have gotten hard lock-ups when hitting my mike button that only an ALT CTL DEL and a computer reboot will correct.
-
Offline NDisles,
A38, Oclub has trees growing in it.
All the ports, when looking to select a manned gun, the labels are mostly inverted, or 90 degress counter clockwise. The airfields are ok.
-
Faulting application name: ahbeta.exe, version: 0.0.0.0, time stamp: 0x5707b7ee
Faulting module name: ahbeta.exe, version: 0.0.0.0, time stamp: 0x5707b7ee
Exception code: 0xc0000005
ahbeta.exe
0.0.0.0
5707b7ee
ahbeta.exe
0.0.0.0
5707b7ee
c0000005
0015b94e This should have been tagged either "exception offset" or "fault offset" somewhere in the report... this is the pertinent information that HiTech was looking for.
f80
01d19271f77b1df6
C:\Hitech Creations\Aces High Alpha Game\ahbeta.exe
C:\Hitech Creations\Aces High Alpha Game\ahbeta.exe
f99433ab-fa3c-4571-be86-3fc3713a7e25
Hope that helps :)
From another post from WmPeters: Fault Offset: 0x0015b94e
I suspect this has the data that Dale was looking for, correct me if I am wrong. Thanks TheFox, I hope this makes their job easier. :aok
-
Reply to Condor.
Sorry for the confusion. I meant to say I uninstalled entire Beta after the patch 16 update. Then several uninstalls of the entire beta with the 16 update. My reinstalls were from the AH Homepage and also the link from Skuzzy's in this forum, all with the same appcrash.
I don't know if you can uninstall a patch only. I understand your frustration with a slow download of the entire beta. I wish I could go back to beta with the 15 patch so I could at least fly offline.
Bixby.
-
Clouds? Or transition to night. Bailed and in tower it was night. It was a square area above the aircraft. Borders were visible back and sides a well.
(http://i695.photobucket.com/albums/vv313/Hajo_01/cloud%20front.png)
Rear
(http://i695.photobucket.com/albums/vv313/Hajo_01/cloud%20rear.png)
-
Thank you very much Oculus.
HiTech
Update worked perfectly for me (including Oculus support). Did seem to notice a fps drop, dropping tree detail made a huge difference.
-
I've been doing online updates since beta14. Today I downloaded the full beta16, saved a copy of thes four folders: ah3terr, chconfig, settings, and sights (working on some updates for the current sights). Ran an uninstall, then a full install of beta16. Tried to go into offline mode and the game would fail on trying to run NDisles.
When I copied over the four folders I backed up, the game ran my custom terrain fine in offline mode. When I then selected NDisles, the game ran it fine in offline mode.
-
Spawned an M4 into the Bishop Ammo Factory, ran into a tree branch, stopped then tried to backup and my tank got buried in the ground. Only the rocket rails showing.
150709,126,388387,0.0,0.6,88.8
craterma
FOV = 14.2
-
Just to follow up on what Bustr said, his experience was almost identical to mine regarding the folders, I had backed up 3 (not the sights), and the same thing happened for me in the same manner.. I didn't get any error codes or numbers on the update from 15 to 16, just a general error code, the system I'm using is Win10 if that makes a difference, I didn't screen shot the error message unfortunately, but it was just a typical windows general error message, no codes or numbers, with a close button.
-
Getting stuck to trees after collision. Have become attached to trees in M18, M3 and T34 after bumping into them. Engine stop/start, forward/reverse, left/right all have no effect.
No mic in AH3 yet all well with every other game I play
-
Patched from the last version, was flying last week.
System error, goes all the way to selecting an arena and crashes.
Uninstalled beta, downloaded full version, same problem.
-
Downloaded today. Game will not start: AHBETA.EXE has stopped working
OS Windows 10
Intel i5 6500
Asrock Fatil1ty Gaming K4 Z170
GTX970 GPU
DDR 4 2400 16mb
SSD 480
Sorry if this is posted on the wrong forum page.
-
Install went as designed.
Online tested the tree collisions by travelling some 25 miles through dense foliage. The first time I hit a tree I thought I had been shot, or hit a landmine (I know; there aren't any landmines). Interesting.
When I hit zoom key the kneeboard pops up in the screen dead center every time. I don't like that.
The kneeboard also resizes to fill the screen even after I have resized it. I don't like that.
During long range shelling I find it more difficult to hit targets because of dense foliage, cloud shadows, and flickering terrain features. That's all good except for the terrain features flickering in and out of visibility.
I love the audio delay from distance (S.O.S.).
On exiting the game it took a prolonged period for the kneeboard to popup and allow a normal exit.
-
Can you post the fault offset please?
HiTech
Hope this helps.
The following is the detail of an Application Error event in
Computer Management... Event Viewer... Windows Logs... Application
Faulting application name: ahbeta.exe, version: 0.0.0.0, time stamp: 0x5707b7ee
Faulting module name: ahbeta.exe, version: 0.0.0.0, time stamp: 0x5707b7ee
Exception code: 0xc0000005
Fault offset: 0x0015b94e
Faulting process id: 0x1f98
Faulting application start time: 0x01d193b5539c1a61
Faulting application path: D:\Hitech Creations\Aces High Graphics Tester\ahbeta.exe
Faulting module path: D:\Hitech Creations\Aces High Graphics Tester\ahbeta.exe
Report Id: 8ff24062-44e2-4b3c-8815-b17f7e19579c
Faulting package full name:
Faulting package-relative application ID:
-
Ki61 between the dial console and seat end is strange...start up smoke is visible here and it has an almost transparency to it even though it is black...definite artifacts showing
There is grass growing through the floor boards of the O'club....need to get a couple of OD's in there to clean it up
-
If you start the Windows Task Manger it will cause the game to crash (Exception Offset: 001e64ee).
If you have the game running, at the opening screen, and start the Windows Task Manager, it will crash the game (Exception Offset: 001e64ee).
If you have the Windows Task Manager running and then start the game, the game starts and runs fine.
-
I can't change FOV Font size and texture size.
-
The Invisible Wall
CraterMA
I leave the hangar with a M-8, turn right and go along the beach. If you stay close to the water you will encounter the wall.
It is a little further out this time.
The width of the wall seems to be between 50 and 75 feet. I tried 4 different ports with same result.
It seems to be localized near the water only. Heading north, east, west or south away from the port.......... I did
not encounter any walls if I went a considerable distance.
The update went smooth. I use WebRoot for my antivirus. I did not have to disable it during the update.
I have Avast on my other computer and I have to disable it for 10 minutes if I want to update the Beta.
:aok
-
Online CarateMA
Waffle,
In the screen capture below, the red arrows point to transition lines that flicker none stop almost like z-fighting. That was how I noticed you introduced the new shore battery object while flying around my offline terrain. It can be fixed by either free standing the mound on flat ground and not using a custom y setting, or sinking the mound with a custom y setting until only enough of the top shows that you can see the walkway and the door on the back side of the bunker.
(http://s20.postimg.org/vgonq6rd9/shoreb.jpg)
-
Just realized that in the cockpit, you have to set the size and position of the clipboard for un-zoomed then zoomed to have the clipboard be in the same spot and size relative to the zoom state. If you don't, the clipboard returns to the default position and size for that zoom state.
-
In cockpit, the clipboard was able to resize smaller (but not larger) and move its position around at first. As soon as I used zoom, while clipboard was up, the clipboard went to center and is now unaffected by any attempts to resize or remove from center of view.
-
Filters fixed my installation...running on a fresh installation.
:salute
-
If you change your gamma setting from the default, then exit out, change the FOV. When you come back in gamma resets to default.