Aces High Bulletin Board

General Forums => Aces High General Discussion => Topic started by: SlapShot on November 02, 2003, 10:35:54 AM

Title: Stick settings ...
Post by: SlapShot on November 02, 2003, 10:35:54 AM

Can anyone explain how the slide bars from 0-->90 work?

What exactly do they represent ?

Title: Stick settings ...
Post by: GunnerCAF on November 02, 2003, 11:42:43 AM

The 10% slider at the top will give you a 10% deflection of that control surface when you have a 10% deflection of your stick.  If you lower the slider, it will reduce the deflection of the control surface for a 10% deflection of the stick.  And so forth for the other sliders.

The graph to the side shows your stick position, vs control surface location (stick on the horizontal axis, control surface on the vertical).  If the sliders are all to the top, the line will be straight from 0 to 100% (10% sick, 10% control surface: 50% stick, 50% control surface: etc.).  As you lower the sliders, the line bows downward (example: 50% stick, 10% control surface).  

Gunner

Title: Stick settings ...
Post by: SlapShot on November 02, 2003, 07:02:40 PM

Thanks Gunner <>

Title: Stick settings ...
Post by: straffo on November 03, 2003, 02:20:45 AM

don't forget to set your last slider to 100% whateve curve you want , otherwise you would have spiking.

Title: Stick settings ...
Post by: BenDover on November 03, 2003, 01:18:07 PM

So if i want my control surface deflection to be absolute with my stick, i should have them all at 100 then?

That would be much better than the current "Why the hell is it turning so slo....wuh! wtf!?!"