Aces High Bulletin Board

Help and Support Forums => Aces High Bug Reports => Topic started by: dbljack on January 22, 2004, 10:26:48 PM

Title: B-26 Bugs on Beta 11
Post by: dbljack on January 22, 2004, 10:26:48 PM

The bomb calibration did not seem to calibrate

The where no pings when I shot down a 109 from the tailgunner postion

I had engine oil damage in both 1 and 2 and a left main fuel leak.  All of the smoke was coming from the center of the plane and not the engines or wings.   This could be why I didn't see the pings because visibilty was poor.

Shortly after takeoff I checked on the drones so see if they where there.  They where trailing and only 1/2 to 1/3 of the plane was there.  Once they caught up I could see the entire aircraft.

dbljack

Title: B-26 Bugs on Beta 11
Post by: Kaz on January 23, 2004, 10:16:02 AM

This has to do with the displayed object size slider in setup/video/video settings.

Those of us that have it set more towards performance will get similar results to what you saw.

Setting detail to full 'more detail' lets you see the drones at any distance.

Title: B-26 Bugs on Beta 11
Post by: Pongo on January 23, 2004, 11:49:20 AM

I tried 3 different runs with the b26 and could not calibrate. It seemed to not want my click on the map to set the alt either.

Title: B-26 Bugs on Beta 11
Post by: hitech on January 23, 2004, 12:27:18 PM

Can you describe what you meen by not calibrate? Does it just miss or when exiting calibration still show on shadow or what?

HiTech

Title: B-26 Bugs on Beta 11
Post by: zmeg on January 23, 2004, 12:43:19 PM

The text stays red, the veiw remains directly below you ,bombs overshoot badly  and at times target alt stays at 0. out of about 20 attempts it worked once but still missed target.

Title: B-26 Bugs on Beta 11
Post by: hitech on January 23, 2004, 01:14:47 PM

Does it turn yellow after pressing u? also check caps lock maby?

Try with and without formations? Works perferctly for me, trying to find the difference.

HiTech

Title: B-26 Bugs on Beta 11
Post by: hitech on January 23, 2004, 01:18:45 PM

Try 100 lb bombs?

HiTech

Title: B-26 Bugs on Beta 11
Post by: hitech on January 23, 2004, 01:28:14 PM

Ok duplicated the problem. Thanks


HiTech

Title: B-26 Bugs on Beta 11
Post by: Flossy on January 23, 2004, 01:29:46 PM

Quote

Originally posted by hitech
Does it turn yellow after pressing u? also check caps lock maby?

Yes the text turns yellow, and I definitely didn't have caps lock on.

Quote

Try with and without formations?

I only tried it with formations..... will try to do some more testing.

Title: B-26 Bugs on Beta 11
Post by: zmeg on January 23, 2004, 01:30:21 PM

Text turns yellow in cal mode but goes back red when you exit cal mode. The terrain moves normally while holding Y, but goes back directly below plane when you exit cal. Loadout or formations made no differance. Also loadout and fuel text flicker off more than on. I did find that only when the clipboard was near center screen that it wouldn't accept target alt.