Aces High Bulletin Board
General Forums => Aces High General Discussion => Topic started by: Thirdup on August 14, 2001, 12:44:00 PM
-
Sorry to post in general, but the hardware forum seemed to draw no reply:
I had everything working fine on my old computer. CH FFx, Pro Throttle (w/SpeedKeys),
and TM Elite peddals (all serial gear). In the old box, the stick was seen by Windows as
a "Force Fx Dx5 joystick throttle & rudder (serial)". It worked perfectly in all games,
including AH. My problem started when I built my new machine.
When I select the "Force Fx DX5 joystick throttle" on my new system, the throttle and
rudder *spike* the red in calibration (when moved to low throttle or right rudder). The
same occurs in-game (it locks into full throttle when I power back, and locks to full right rudder when I apply right rudder). The FFx works fine in the CH test app's and even in AH....just the throttle and rudders are porked. All drivers are current and running DX8.
Everything works when I select 3-axis, 4-button, rudders checked...and it calibrates
fine. But AH does not see it as FFx.
So my question is, who here has a CH FFx stick and Pro Throttle (serial)...and what
does Windows recognize your stick as?
Much thanks,
[ 08-14-2001: Message edited by: Thirdup ]
-
i use CH force FX pro trotle and ruder
the spike is always there soemtime lees sometime more but when replaced all original potenciometers with the special 1 is it mostly disapered well in AH if it recognize like force FX trotle ruder ?? never take care about i use spedkeys to program direct the key maped funktions and all axis are there force FX efect works great cant say have problem , < sometime i broke the stick>
i got another 2 more broken Force Fx so i experiment on meny function and changes on it
about the your probel mporked ruder ant trotle check on the botom of force FX i have a switch selector !! 1 pos is for Combat stick another pos 2Trustmaster and be sure u selected the ,ForceFX DX5 Joystick Throttle & Rudder(Serial) driver
forget the AH what joystick see
and try to corectly calibrate in Windows
if all the trotle and ruder corectly switched u must see the ForceFX DX5 Joystick Throttle & Rudder(Serial) and ruder , trole check slider + 10 butons actualy the second hat will work ALWAYS like 4 buton
and dont forget to REMOVE iforce driver !!
-
Thanks Minus.
The problem with the rudder and throttle are more than just a spike I guess. It spikes, then it stays spiked (so, I get full throttle all the time or full right rudder).
I will double check the switch on the base, but I have not fiddled with it since I changed boxes (and the CH stuff still works correctly on my old box).
u must see the ForceFX DX5 Joystick Throttle & Rudder(Serial) and ruder
That's what I thought (and what I was afraid of). If I can't get Windows to see it, I'm boned in AH. :(
-
#rd...you need the CH FFX drivers...I'll mail to you this evening. Atleast that's what I think the prob is. I use the FFX Pro Throttle and Rudders also and every time I switch 'puters there's always an FFX driver issue since Windows doesn't supply them with their software...mail ma a good e-mail addy for ya :D
-
Thanks Lars, it can't hurt to try.
I'm running the drivers from CH's support site. I don't think they have done any driver tweaks in a few years (ie: show as DX5 support). http://www.chproducts.com/support/index.html (http://www.chproducts.com/support/index.html)
If you want to send em, I will try anything at this point.
thirdup@aol.com
-
Just wondering if you have the serial port active...my new MB had one of them disabled by default...hell, I'm no techno weinnie...just the normal kind o' one :/
-
Yep. I can get the FFX to work just fine (it's just the throttle and peddals that are porked) when using the CHFFx drivers.
Everything works fine (stick rudder, throt) if I install it as a 3-axis, 4-button, w rudder.....just no FFx.
So I can confirm the equipment all works and I can confirm the FFx works.....just can't make it all work at the same time :(
-
it can be the Elite ruder pedals?
when i buy it my CH pro ruder the potentiometer vas alredy bad !!! / u can imagine ? but i was to BZ to play WB <instead of refund or change > so i demonted and centered the crap , but it stil have terible spikes so i changet the potetiometer wit reostat !!! self made 1
with corect impedance wire i have realy fantasitc range and still work until now :-)
try also the seting like CH combtastick !!
in the begining the I force worked fine
if u use CH combatstick windows will detect the ruder and trotle if problem still up
after is sure the ELITE ruder s have same crapy wire change !!!! dont be afraid cut the wire and find the corect combination