Aces High Bulletin Board
Help and Support Forums => Aces High Bug Reports => Topic started by: Batz on May 14, 2004, 07:59:15 PM
-
I was on yesterday (b29) fine. I could tried get on this morning (b29) on Host times out (12 sec then alt route 12 sec time out).
I just dl'd b30 and I still can't connect.
I checked all the obvious (firewall etc..)
I can surf, login to AH1 etc....
Any hints?
edited bold (typo)
-
Same here. Since beta 28 I have been getting Host Timeouts. I never had a problem before and I haven't done anything to my Dlink router's firewall. I can connect to AHI and all other games with no prob.
Any ideas?
-
What's the AH2 arena ip?
What port needs opening?
-
it's the same computer as AHI
HiTech
-
Same problem here. Can get into AH1 fine but AH2 keeps timing out and cant get in. FBRaptor
-
i cant get in either, can not connect to host.:(
-
The same here. I have not been able to get on to AH2 because the host times out. This has been happening since patch 28. Thought the problem would be corrected in subsequent patches, but no joy. Just downloaded patch 29 and 30 and it did not work. I then removed AH2 and reinstalled the full version of AH2 and get it still times out. :confused:
-
bump....
-
I am still gatting time outs since 28 also.
-
Can you guys having this problem post what kind of firewall or router you're using if any? Looking for a common connection.
-
I have a DLink DI-614+ wireless router. I haven't changed any settings on it. I run no software firewall on my system. AHI and all other games connect fine over the net. Only AHII is giving me the host connect problems. Before beta 28 I was able to connect with all previous betas.
-
Same here. prior to Patch 28 I had no problems with AHII beta.
I have a dsl connection through SBC and their router is a D-Link DFE-528TX PCI Adapter, which is firewalled via control panel, internet options, etc. I disabled the firewall and still get host timed out message.
-
2wire home portal 1000sw
it has built in Firewall, but even when disabled I cant connect to AH2. AH1 is np...
Bellsouth is my ISP.....
-
Duh I also have the 2wire home portal 1000S provider SBC
-
Same 2wire SBC setup. AH1 connects fine, AH2 connected fine before the last update
-
same here 2Wire Home portal. SBC DSL connection.
-
I'm seeing a pattern here :D
-
AH2 times out as soon as it tries to connect to the server :mad: i am on earthlink dsl and my firewall is disabled
-
Last time online was beta 26 on Weds night. What ever happened occured AFTER beta 26.
AH1 has no problems what so ever.
And...er...BUMP
-
nudge..
-
Also 2wire Home Portal from SBC.
No issues getting into AH1 or any other online place. Most of the time it times out however once in a while I can get into AH2.
Only firewall is the one packaged with XP home. FBRaptor
-
I'm not using the Home Portal Network but I do have SBC DSL in common with the others...hmm.
-
HAD same prob with my connect hit windows key to go to desktop then back into ah2 connected fine otherwise i get timeout
-
windows key doesnt help...
Heres a 2-wire home portal forum from dsl-reports..
http://www.dslreports.com/forum/2wire?r=230
I haven't made post becuae I am unsure how to describe the issue...
-
Linksys router on DSL and AH1 has never had a prob
I am glad to see I am not alone now.
-
Bunch of 2wire dweebs :p
-
SBC DSL here as well.
-
HT has a good idea what could be causing this. Could you guys also post what version of Windows you're running?
-
Heres my info with the updates:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 1 Build 2600
Saturday, May 15, 2004 NVIDIA display software update released on October 06 2003.
Saturday, May 15, 2004 Windows Media Player 9 Series (Windows XP)
Saturday, May 15, 2004 Security Update for Windows XP (KB840374)
Saturday, May 08, 2004 Critical Update for Internet Explorer 6 Service Pack 1 (KB831167)
Saturday, May 08, 2004 Cumulative Security Update for Outlook Express 6 Service Pack 1 (KB837009)
Tuesday, April 27, 2004 Silicon Image storage software update released on February 03 2004.
Tuesday, April 27, 2004 814078: Security Update (Microsoft Jscript version 5.6, Windows 2000, Windows XP)
Tuesday, April 27, 2004 816093: Security Update Microsoft Virtual Machine (Microsoft VM)
Tuesday, April 27, 2004 817787: Security Update Windows Media Player for XP
Tuesday, April 27, 2004 Security Update for Microsoft Windows (KB824141)
Tuesday, April 27, 2004 Security Update for Microsoft Windows (KB823182)
Tuesday, April 27, 2004 Security Update for Microsoft Windows (KB824105)
Tuesday, April 27, 2004 Update Rollup 1 for Microsoft Windows XP (KB826939)
Tuesday, April 27, 2004 Critical Update for Windows Media Player Script Commands (KB828026)
Tuesday, April 27, 2004 Security Update for Microsoft Windows XP (KB825119)
Tuesday, April 27, 2004 Security Update for Microsoft Windows XP (KB828035)
Tuesday, April 27, 2004 Security Update for Microsoft Data Access Components (KB832483)
Tuesday, April 27, 2004 Security Update for Windows XP (KB835732)
Tuesday, April 27, 2004 Security Update for Windows XP (KB828741)
Tuesday, April 27, 2004 Security Update for Windows XP (KB837001)
Tuesday, April 27, 2004 Cumulative Security Update for Internet Explorer 6 Service Pack 1 (KB832894)
Tuesday, April 27, 2004 DirectX 9.0b End-User Runtime
This morning (Sunday) it will let me on ONCE. Sometimes a reboot will allow me back on, sometimes not. Makes no difference turning the 2 wire moniter off, or disabling anti-virus or running endit all. When it decides to let me on I can be lean and mean or have everything but the kitchen sink running. Only once per fresh boot though ...sometimes :D
23 on a Sunday morning, 43 last night, peoples be comin.
-
Win Xp
-
See news forum for a patch.
-
Just installed patch and it's still not connecting. :(
Running WinXP, Dlink DI-614+ router and SBC DSL.
-
updated to patch 31 still no connect. i am running win xp pro with a netgear wgt624 router on a cable internet connect
-
I have had the same problem but it's not consistent. Sometimes I can't log on at all, other times it's taken 13-20 seconds to log on, and other times logs on first try. Another problem and I don't know what it is for sure yet, is when I do get on line the game will run fine for 45-60 minutes then crash. Not to desk top but I get a blue screen, sound goes into a continuous loop, and system freezes up. I suspect that I am loosing host connection, and the game is just freezing up.
P-4 2Ghz
1 Gig Ram
SB Live
ATI 9700 Pro
-
No improvement here. Still get on randomly for no apparent consistant reason.
You guys will get it I have no doubt.
-
Worked for me,
Thanks Pyro.....
-
oops take it back
I logged in once, logged out and then tried to log in again and am back to where I started, connection timed out....
-
We're in the same boat Batz, have a beer
-
XP here Pyro.
XP pro.
-
New patch did not help me :(
I updated from .30 though? Do I need to go back to .29 and update that way?
-
new patch did nothing for me either :(
dell 4550 (2.66gig) , Windows XP, ATI 9700, earthlink DSL
-
I disabled the remote DSL firewall competely, EVERYTHING comes through now, still a no-go.
Tried a full version fresh install, nada..
-
Same here np.....
When I did get in there was 47 folks furballing away, like a dumbarse I decided lemme exit reenter to make sure that patch was the fix, only to be denied!!!!
Anyway I got few broken pavers to pull up and replace, off to home depo.....
I will check back later.....
-
YAY !!!! i got in finally :D what i did was delete my AH2, loaded beta 29, beta 30 then the 31 patch and it worked fine :D good job HT and Pyro AH2 is great :D
doh' logged from AH2 to post this, then could not get back in, same old problem......host time out :eek:
-
Do it four times in a row without rebooting and I'll believe it.
Let us know.
Damn you did..
-
Bump
-
I have uninstalled and reinstalled DirectX 9 I have uninstalled and reinstalled AH2 patch 30 and even downloaded and installed 31 still can not get on to AH 2. I keep getting host time outs I don't know what else to do.
-
(http://www.onpoi.net/ah/pics/users/334_1084786639_ah2login.jpg)
I make it in every one in a while (long while)..... I just got in a few min ago but at 5:30 am there wasnt much to do :)
At least confirm what we all believe, that its on your end.... :)
I am headed off to work, I'll give it ago later this evening...
-
Well the patch obviously didn't resolve it, but it did let HT know what wasn't causing it. There should be another patch today that we'll try.
-
WOOT!
Thanks Pyro!
-
The new patch is up now. Check the news forum and let us know the results.
-
Host timed out everytime I tried.
win-98
symantec firewall
sbc DSL
-
connected 15 times in a row :)
You might have a winner ....
-
my last update was on saturday nite, ill try again when i get home.
-
The new patch 32 fixed my extended delay. It use to take 3 or 4 seconds before it would connect now it goes directly in without the delay timer coming up.
-
Grrr
Now I can't wait to get off work!
-
Originally posted by Pyro
HT has a good idea what could be causing this. Could you guys also post what version of Windows you're running?
I am running windows XP Home Edition Version 2002, Service Pack 1
-
Patch 32 is working for me.
-
Bingo! Connects now instantly. Thanks gents!
-
HT that cured my connection problem, takes 3-4 seconds but loggs in every time. It also cured my crashing problem too. Thanks guys for the hard work :aok
XP Home
P-4 2Ghz
1 Gig Ram
SB Live
ATI 9700 Pro
-
You guys and your service is simply second to none.
Cudo's to the crew, beers on me, it's time to play :D
I'm curious as hell as to what it was.
Good show AH, you never fail.
-
I concur, the beer is on nopoop....
-
Looks like it fixed it for me~!
Thanks HT! You rock!
-
Same here. Works great now. No issues logging in. Thanks HTC Crew!!!!!!!!!!! FBRaptor
-
Sory but still can't connect.
No host timeout,,,,just you can't connect.
This is the first time I've had any trouble with AH2.
-
Im curious also nopoop.
What it has to do with is the code to permit zone alarm to minimize AH. The hole problem stems from an incorect method that zonealarm uses to block access while it is waiting for your user input.
None full screen apps, are not effect by this problem, because you can still see ZA. To fix this problem I put 1 part of the connect process that ZA intercepts into a different thead. This allows me to minimize AH while ZA is asking for a responce. All I did to get you guys working again was to back out that thread function.
Still have no idea why it works on most machines, but not some. Going to try another aproch to see if I can get both to work.
HiTech
-
That's interesting. I don't run zone alarm and configured the remote firewall at SBC to let everything through. Seems the problem mostly effected SBC DSL customers. What's strange is that the problem was only in AH2.
I'll reconfigure the firewall back to allowing TCP again and see what happens.
-
I use Win98se OS, with zone alarm installed, everytime I update, and then start the game, after AH2 screen minimizes to let ya check ZA to let it access the net, I have to close AH2 and restart it.
If I try to maximize it after clicking ok for ZA it never comes back up it just sits there blue/greyish screen, this has started since like patch 21 or 22, if I recall correctly was ok before patch 21. Also I am using patch 30 (31 & 32 not installed)
outside of the ZA issue I connect fine and fast to the server.
-
Didnt fix for me.
Before last patch it would go directly to host timed out without counting seconds. Now it counts seconds off but still cant connect, Then it locks up & I have to cntrl+alt+delete, (AH2 not responding) to close it.
Pent 3 933
win98
geforce-4-MX-420
SB-live Value
symantec firewall
SBC DSL
-
no more problems here htanks for the hard work
win xp pro
netgear router
cable internet
-
still not working for me either :(
Dell 4550 - 2.66 gig
windows XP
ATI 9700
DSL
-
Mine is working fine now. Thanks for the hard work to fix the problem.
-
I had AH II running untill Patch 34 now i'm getting host timed out again. Running windows XP Radeon 9800 pro vid card. I just put the video card in the day after i got AHII to run which was Thursday the 20th of may could that have caused the problem. I also have norton anti-virus and internet security on my puter but i always tell the internet security to allow the connection to AHII.
-
logged on with patch 30 got upgrade notice upgraded to patch 33, couldn't get on found patch 34 still have same .
-
I can't log on either. Cannot connect to host. Windows 2000 pro with cable modem and D-Link router.
-
I completely removed patch 34 AH2 and downloaded v35 full and installed.....STILL CANNOT CONNECT TO HOST!