Aces High Bulletin Board
Help and Support Forums => Aces High Bug Reports => Topic started by: BUG_EAF322 on June 27, 2004, 06:10:04 AM
-
Only 20 fps when i was at a gv battle near 64.
later i played il2aep it seemed all much smoother.
the graphics are not worth the 20 frames a second though.
what would it have been for people with lesser systems.
:( :rolleyes: :confused:
-
BUG....your system faster cpu then mine and I'm getting no less then 40 frames.
AthlonXP2400
ASUS A7V333 mobo
-
heck I'm lower than both of you and I get consistent 40 to 80 framerate unless alot of action going on like 15+ planes over smoking fields with lot ack smoke etc then it drops to like maybe 25 to 30...very seldom do I get near 20 if at all. that is with 256 texture and sliders near 1/2 way thru all settings. If I increase to 512 meg textures only slight drop of framerates by 5 to 10 fps and I drop into the high teens if screen is alot of action as mentioned above. Also near same when on ground in GVs
AthlonXP1700+
ECS K7S5A Pro mobo
Ati Radeon 9000 64 DDR 4x AGP( ati Cat 4.3 drivers most recent for win98)
win98se all updated drivers)
WD 80 gig HD 8 meg cache 7200 rpm
256 meg DDR mem 333mhz
dx9b
HP P1100 21" monitor set to 1024x768
120 mhz refresh vsync off
-
amd 3200
nforece2 mobo
512mb corsair twinx
ati9500 pro 128m
Steady 100 above 5000' agl - dips to 80's in busy fight
lowest frame - on the deck, massive furball, smoke everywhere high 50's to low 60's
seems you ought to get at least as good as that
-
Originally posted by BUG_EAF322
Only 20 fps when i was at a gv battle near 64.
later i played il2aep it seemed all much smoother.
the graphics are not worth the 20 frames a second though...
Bug,
My specs:
AMD Athlon XP 2000+ (clocked at 1.7Ghz)
1GB 266Mhz DDR RAM (PC2100)
ATI Radeon 9800 XT (256MB RAM) w/ optimized
Omega Drivers 2.5.51 (based on Catalyst 4.6 drivers)
EPOX EP=8RDA MOBO (Nvidia NForce-2 chipset)
Viewsonic 17PS monitor at 1024x768 x 100Hertz
I get widely varying framerates based on one of two settings in game. I choose MAX DETAIL and MAX DISTANCE slider positions and Shift-F4 (ground detail view) when JABOing or GVing and framerates will be in the 20-25 area. I choose MAX PERFORMANCE and MINIMUM DISTANCE sliders when dogfighting with Shift-F3 for minimal horizon detail and I get 73FPS consistently.
While it will still take some time for HTC to get everything right on the graphics, my "mission" determination of graphics quality in-game is fairly easy to modify to get the framerate I need. After a JABO run, I change all the sliders and settings while flying to convert to A2A mode. It's not a huge task. See if that helps ?