Aces High Bulletin Board

Help and Support Forums => Technical Support => Topic started by: LWACE on August 04, 2004, 12:26:26 AM

Title: .
Post by: LWACE on August 04, 2004, 12:26:26 AM

nvm

Title: need some help...
Post by: maddog on August 04, 2004, 10:36:28 AM

What?

Title: need some help...
Post by: LWACE on August 07, 2004, 04:00:22 PM

ok now need it, just got a comp couple weeks ago, its got:

intel 2.6ghz cpu
512mbs of ddr sdram
GF 5200fx vid card

i decided i wanted to upgrade the ram first to a gig, took me bought the wrong kinds few times:D  took em back and fineally just took my stick into the local comp store and got another of the exact same kind.

but, when i snap em both into place, my system makes this horrible beeping sound, it wont even start up, screen just stays blank like the systems off and the system itself will beeeeeeeeeeep then stop about 2 secs and do it again.

sorry i know this isnt much info, but anyone got an idea of what im doin wrong or can give me some ideas as to what i can do ?

thanks for the help fellas

Title: need some help...
Post by: Roscoroo on August 07, 2004, 09:12:01 PM

thats a ram error beep .  put the ram back in and take the new stick out . if it works then replace the old stick with the new one . if it beeps then the new stick is bad .

Title: need some help...
Post by: LWACE on August 07, 2004, 10:15:20 PM

alright, i think i have a bad slot on this MB, cuz i put the old one in, had to jiggle it abit, but it workd. Put it in the other slot, didnt work. Same happend with the other stick, both workd after afew trys in the one slot, but wouldnt do crap in the other or if there was one in that slot.

Title: need some help...
Post by: Ghosth on August 08, 2004, 09:20:14 AM

Can you take that stick back, get bigger one of the same type?

Instead of 256 get a 512 etc?

Put that in the good slot & see if it works.