Aces High Bulletin Board

Help and Support Forums => Technical Support => Topic started by: mosgood on November 30, 2004, 02:59:05 PM

Title: problems with CH Fighterstick
Post by: mosgood on November 30, 2004, 02:59:05 PM

I can't get my stick to register in the joystick settings window or get any of the buttons to respond at all.  

It appears in the joystick select window... the buttons just dont do anything but make the 3 colored lights change on the joystick.


Hmm... seems that the rudder isn't working either.

I haven't been on AH2 for about 6 months so... has there been a problem like this?



throttle works fine.....

Title: problems with CH Fighterstick
Post by: JB73 on November 30, 2004, 03:13:06 PM

you using the CH software to program it?

Title: problems with CH Fighterstick
Post by: mosgood on November 30, 2004, 03:16:01 PM

I've always used the AH software......


has this changed?

Title: problems with CH Fighterstick
Post by: FBScud on November 30, 2004, 04:59:25 PM

I was able to use AH programming for CH stick, throttle and rudder pedals.  Just the usual time it takes assigning functions.  Make certain your hardware is recognized in windows, then make sure you're selecting the right piece when you try to map functions.

Title: problems with CH Fighterstick
Post by: stantond on December 01, 2004, 06:03:31 PM

Whenever I have a problem with a CH product and contact tech support the first thing they tell me is to start Control Manager and check to see if your stick is calibrated and responds correctly.  I suggest you try that.

If all that checks out, then your stick mapping in AH2 has gone away (or never existed).  BTW, six months ago AH2 was not released.  That is most likely why you are seeing no mapping.  I don't think the settings and mapping can be ported from AH1 to AH2, but I never tried.


Regards,


Malta

Title: problems with CH Fighterstick
Post by: FBScud on December 02, 2004, 05:00:44 AM

Stantond may have hit it.  If you downloaded AH2, you'll have to  remap your controls.

Title: problems with CH Fighterstick
Post by: mosgood on December 02, 2004, 06:51:14 AM

Hmmmm... it mysteriously started working.....  and I didn't change anything.


Maybe I rebooted my computer or something...


thanks for the input

Title: problems with CH Fighterstick
Post by: mosgood on December 04, 2004, 02:26:45 PM

ok  dammit

my stick and rudder will  show up  in "select joystick" and will also indicate that the buttons are being seen   but....

they do not show that any signals are being received in the little colorful diagram with the lines.....


and ya   I calibrated

Title: problems with CH Fighterstick
Post by: Wizer on December 05, 2004, 10:56:47 AM

 Mosgood.  I think you will have to download Control Manager from CH Products and then map your keys in AH II.   Wizer