Aces High Bulletin Board
General Forums => Hardware and Software => Topic started by: crashnburn on June 03, 2005, 01:36:56 PM
-
after bailing on eq i've decided i wanted to get back into flying online. (used to play aw3) anyone have a basic adv file for the old mark2 weapons controller? i haven't been able to find any listings for one. (or any posts in the forum about them). thanks in advance.
-
REM WarBirds V2.x by Sean Long
REM Digital Throttle
REM
REM Written and Tested by Sean Long, Nov 1997
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM �Base Switch Settings �
REM �Black Hat switch = Analog �
REM �Red Switch = Digital �
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM -------------------------------------------------------------------------
REM Digital throttle: min entry and exit is engine on/off
REM 20 steps of throttle up and down, burner is wep
REM -------------------------------------------------------------------------
GAME 1 30
THR 20 1 3 2 4 4 F10 F10
BTN MT /N e /R e
REM FCS Buttons:
BTN UB b
BTN MB BSP
BTN LB /U KP5
/M KP5
/D o
REM 浜様様様様様様様様様様様融
REM �WCS II Buttons Commands:�
REM 藩様様様様様様様様様様様夕
BTN 1 /U /N g
/M /N g
/D /N y
BTN 2 5
BTN 3 r
BTN 4 /N w
BTN 5 /N q
BTN 6 /U /N CTL x
/M SPC
/D /N F11
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM � NOTE: THIS FILE IS TO BE USED WITH THE NEW CHIP AND MICROCODE FOR �
REM � THE MARK II WCS ONLY. IF YOU DO NOT HAVE THIS CHIP, THEN CONTACT �
REM � THRUSTMASTER at 503-639-3200 TO INQUIRE ABOUT UPGRADING TO THE �
REM � NEW CHIP AND MICROCODE!!!! �
REM � �
REM � How can you tell if you have the new chip and microcode? At the �
REM � C:\MARK2 Dos prompt type DIR MK2LOAD.EXE and hit enter. If it �
REM � says "File not found then you have the old microcode version that �
REM � uses DOWNLOAD.EXE instead. �
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
-
REM 敖陳陳陳陳陳陳< Delete this section when you are done! >陳陳陳陳陳陳陳�
REM � �
REM � WCS Mark II ADV Programming Template �
REM � �
REM � Please supply as much requested information as possible. �
REM � �
REM � (Keep in mind though, that there is a 400 line limit to ADV files!) �
REM � �
REM 青陳陳陳陳陳陳陳陳陳陳陳陳陳陳陳�> <陳陳陳陳陳陳陳陳陳陳陳陳陳陳陳陳陳�
REM
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM � CAUTION!!! You MUST have ThrustMaster Command & Control Center �
REM � (MARK2.EXE) vs 1.38 or higher and MK2LOAD.EXE vs 5.01 or higher to �
REM � use the macro capability. You can tell if you have vs 1.38 by looking�
REM � at the top of the C&CC screen where the version # is shown on any of �
REM � the menu screens or click on F-7 About to view the version #. To tell�
REM � if you have MK2LOAD.EXE vs 5.01 just download a file - you will see �
REM � the version # at the top of the download screen. To obtain the newer �
REM � versions if you do not have them, check with any of the listed places �
REM � in C:\MARK2\MK2UTILS\TMBBS.TXT where you may download the latest �
REM � versions of the Command and Control Center software. �
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM Game Name, Version, Publisher
REM
REM YOUR ADV File Description
REM
REM Written and Tested by YOUR NAME - MONTH YEAR
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM �Base Switch Settings �
REM �Black Hat switch = Digital or Analog <= Choose one and erase the other �
REM �Red Switch = Digital or Analog <== Choose one and erase the other�
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM �Game Settings: (Settings required for this game to use WCSII)�
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM � Place Mdef files below this line (i.e. Mdef Newname)�
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様�
Mdef TEMPLATE
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様融
REM � Change 'TEMPLATE' to the name of the MDF file that you �
REM � want your ADV file to reference. For example, if you �
REM � create a new ADV file called NEWSIM.ADV, you might want�
REM � the line above to read 'Mdef NEWSIM'. �
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様夕
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様融
REM � Place special macros below this line (i.e. @macroname, etc)�
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様夕
REM 浜様様様様様様様様様様様融
REM �(P)FCS Buttons Commands:�
REM 藩様様様様様様様様様様様夕
BTN UB
BTN MB
BTN LB
BTN HU
BTN HD
BTN HL
BTN HR
REM 浜様様様様様様様様様様様融
REM �WCS II Buttons Commands:�
REM 藩様様様様様様様様様様様夕
BTN 1
BTN 2
BTN 3
BTN 4
BTN 5
BTN 6
REM 浜様様様様様様様様様様様融
REM �WCS II Rocker Commands: �
REM 藩様様様様様様様様様様様夕
RKR UP /P
/R
RKR DN /P
/R
REM 浜様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
REM � NOTE: THIS FILE IS TO BE USED WITH THE NEW CHIP AND MICROCODE FOR �
REM � THE MARK II WCS ONLY. IF YOU DO NOT HAVE THIS CHIP, THEN CONTACT �
REM � THRUSTMASTER at 503-639-3200 TO INQUIRE ABOUT UPGRADING TO THE �
REM � NEW CHIP AND MICROCODE!!!! �
REM � �
REM � How can you tell if you have the new chip and microcode? At the �
REM � C:\MARK2 Dos prompt type DIR MK2LOAD.EXE and hit enter. If it �
REM � says "File not found then you have the old microcode version that �
REM � uses DOWNLOAD.EXE instead. �
REM 藩様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様様�
-
I never did delete my old WCS stuff, although I finally got rid of the stick and throttle after I sold my last computer with the old AT style keyboard plug.
I have a bunch of old files for my old TM gear, as I used to take it fairly seriously back in the day (1997) and never found a reason to delete my archives. All zipped up it's around 600k, so I could email it to you if you like.
edit - alternately, if you have bittorrent, download it from my bittorrent tracker:
http://eagl.dyndns.org:6969/
The file is a zipped folder, mark2.zip
-
There's alot of TM stuff over at Frugal's World (http://wwww.frugalsworld.com). You could also send S.O.B an e-mail. He used to be a tech support weenie for them.
-
thanks guys. i have the original advs and the c&c program. i'm looking for a basic ah adv to get started. i used to write my own. i lost my book and forgot some of the details to writing one. thanks again.