Aces High Bulletin Board
General Forums => Hardware and Software => Topic started by: Big G on August 14, 2005, 12:09:49 PM
-
Ok guys
I can get a decent monitor ok, but what about the hardware for the cpu ?
Could someone let me know what sort of system or bits to buy?
I want to spend around $1500 to do it and 1 of the techies at my work ( Network company) will gladly put it together for me.
Any ideas ?
-
ASUS mobo: ~90
P4 (with fan) 3.2/3.4-ish say ~200
GeF 6600: ~160 (AGP)
1 GB PC3200: ~120
case: ~50
PSU: ~60
DVD-ROM/CD Burner: ~50
100GB HD: ~120
MS Optical mouse (the best I've used): 10
101+ key keyboard (YMMV): 20
That's ~$880 for a decent setup. If you want faster CPU you still have budget for it. More ram etc you still have a good surplus of $$ to deck it out with the best.
-
http://www.compu-terra.com
-
I just put this box together using NewEgg.com and put most of my money into the big 3: CPU, RAM, and video card. For a$100 or two more, the video card could have been a little better, but I prefer the single-slot, low power consumption of this one. This PC runs very quiet and cool (cpu at 85 deg F idle, about 100-105 deg F gaming).
1 AMD Athlon 64 3800+ Venice 1GHz FSB Socket 939 Processor Model - Retail $367.00
1 CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 400 Unbuffered Dual Channel Kit - Retail $303.20
1 ASUS EAX800XL/2DTV/256 Radeon X800XL 256MB DDR PCI Express x16 Video Card - Retail $283.00
2 Western Digital Caviar SE WD1600JS 160GB 7200 RPM Serial ATA II Hard Drive - OEM $166.00
1 BFG nForce 4 Ultra Socket 939 NVIDIA nForce4 Ultra ATX AMD Motherboard - Retail $109.00
1 Antec Performance I P160 Silver 1.2mm anodized aluminum ATX Mid Tower Case - Retail $95.00
1 Antec NeoPower ATX 480W Power Supply - Retail $74.00
1 SONY White IDE DVD Burner Model DRU720A - Retail $71.99
Subtotal: $1,469.19
Tax: $0.00
Shipping: $51.75
Total: $1,520.94
I could have saved $218 if I would have settled for the 3000 (1.8GHz) cpu and then tried to overclock it to 2.4GHz.
I could have saved $200 if I would have settled for 2x512MB of value RAM, but Aces High 2 uses more than 1.2GB when I play it on this box :)
I could have saved $20 on the hard drives, but it was a small cost for top of the line SATA2 performance paired in a RAID 0 configuration.
I could have saved $20 on the motherboard, but the cheaper ones didn't have SATA2 (normal SATA has half the potential performance of SATA2).
The DVD burner was actually lower than the local CompUSA sale/rebate pricing.
Taking into account all of the above, I could have spent only $1050, but the extra money ensures I won't want or need upgrades for awhile...
Other than another 2GB of RAM to fill in the empty slots and eventually a 512MB RAM video card with twice the pipelines of this one :)
-
Thanks guys, I'm going to print this off and give it to one of our engineers in here and let him get on with it !
Thanks again everyone! :)
Big G
-
What kind of bandwidth does SATA2 allow? As compared to normal SATA?
I don't fully remember, but isn't IDE something like 1.6MB/s?
-
I would recommend, if you are going with an AGP interface MoBo, you buy a better Gfx card than a 6600, IF you have budget for it.
The 6600, while its a great card, is a wee bit behind right now with alot of other cards - and if you have the budget, spend it on the Gfx card!
NewEgg.com rocks, and for finding best deals, try http://www.pricewatch.com
-
Can't go wrong with a ATI Card.They lead all the others as far as performance goes.
-
Originally posted by Krusty
What kind of bandwidth does SATA2 allow? As compared to normal SATA?
I don't fully remember, but isn't IDE something like 1.6MB/s?
I believe the theoretical bandwidth of SATA2 is 3GB/s compared to SATA1 at 1.5GB/s. I did some research first to see if it actually made a difference. I found some reviews that showed in most circumstances, the WD1600JD outperformed Raptors. The difference in cost compared to SATA1 or EIDE was negligible, so I figured "what the heck" and went with SATA2. I haven't benchmarked it, but I haven't seen any in-game stutters at all from hard-drive access despite playing sims at 1600x1200x32 at max quality, though the RAM helps out there as well.
As for ATi versus NVidia video cards, it is a tough choice. Price, performance, heat, power consumption, and image quality have gotten really competitive ever since the 6800 series arrived. I leaned toward ATi more out of habit than principle. Though I believe for a given price, ATi still delivers better performance and image quality when running at high resolutions and with FSAA and AF.
This is my first AMD system. I am extremely happy with both the stability and performance of this whole combination. I know my cpu temps are as low or lower than my P3 cpus and dramatically cooler and less power hungry than the P4s.