Aces High Bulletin Board

Help and Support Forums => Technical Support => Topic started by: The Fugitive on October 02, 2005, 08:43:32 PM

Title: figure this one out
Post by: The Fugitive on October 02, 2005, 08:43:32 PM

I installed a new motherboard. Everything worked fine with the old set-up, and was getting in the 40's for frame rate... CPU was a 2.4 intel running at 1.8.. ram was 1 gig at 333 mhz

New board runs CPU at 2.8, now have 1 gig of 3200 ram ( main reason I switched MB was the ram) evrything works fine, running at 100+ frame rate.

Now the problem... I use old analog CH equipment. Worked fine w/old motherboard, but with the new one button inputs are very sparatic, and slow. Hit a view button and takes a second or two to see it then switchs, if it sees it at all. While its working on that input, it has trouble with other inputs. Inputs on the throttle work fine.

Any ideas?

Title: figure this one out
Post by: AKDogg on October 03, 2005, 08:08:37 AM

Are u using an onboard sound/gameport?  If so, lose it and get a soundcard like a soundblaster Audigy 2zs or get a joystick that uses USB.