Aces High Bulletin Board
Help and Support Forums => Aces High Bug Reports => Topic started by: Sundiver on November 14, 2005, 11:40:45 AM
-
I saw it mentioned about a year ago, with no followup so here it is again.
When in a carrier hanger you cannot change the loadout on aircraft or GV's. It looks as if you're zoomed in to close. Pictures to follow.
System Specs:
System Information report written at: 11/14/05 12:32:41
System Name: DADS
[System Summary]
Item Value
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name DADS
System Manufacturer MSI
System Model MS-7032
System Type X86-based PC
Processor x86 Family 15 Model 28 Stepping 0 AuthenticAMD ~1601 Mhz
BIOS Version/Date American Megatrends Inc. Version 07.00T, 4/2/2001
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
User Name DADS\Dad
Time Zone Eastern Standard Time
Total Physical Memory 8,192.00 MB
Available Physical Memory 715.87 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 1.65 GB
Page File C:\pagefile.sys
Name RADEON 9550 (Omega 2.6.75a)
PNP Device ID PCI\VEN_1002&DEV_4153&SUBSYS_04021002&REV_00\4&83D6234&0&0008
Adapter Type ATI display adapter AGP (0x4E54), ATI Technologies Inc. (Omega 2.6.75a) compatible
Adapter Description RADEON 9550 (Omega 2.6.75a)
Adapter RAM 256.00 MB (268,435,456 bytes)
Installed Drivers ati2dvag.dll
Driver Version 6.14.10.6575
INF File oem22.inf (ati2mtag_RV350 section)
Color Planes 1
Color Table Entries 4294967296
Resolution 1280 x 1024 x 60 hertz
Bits/Pixel 32
Memory Address 0xB0000000-0xBFFFFFFF
I/O Port 0x0000C800-0x0000C8FF
Memory Address 0xCFEF0000-0xCFEFFFFF
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6575, 1.29 MB (1,350,144 bytes), 7/18/2005 9:36 PM)
http://www.explicit-designz.net/freehost/files/10/ahss1.JPG (http://www.explicit-designz.net/freehost/files/10/ahss1.JPG)
http://www.explicit-designz.net/freehost/files/10/ahss6.JPG (http://www.explicit-designz.net/freehost/files/10/ahss6.JPG)
http://www.explicit-designz.net/freehost/files/10/ahss7.JPG
-
Just to resolve this; the "hanger" gets destroyed with the carrier. If the carrier is sunk, you must go to another field to select ammo and fuel loadout before coming back and launching.
-
Originally posted by OOZ662
Just to resolve this; the "hanger" gets destroyed with the carrier. If the carrier is sunk, you must go to another field to select ammo and fuel loadout before coming back and launching.
So then, just to be clear: The fact that no matter what carrier I choose, no matter what map or arena it is in, no matter if I choose a carrier right after a map has been put up or reset thus no carrier has been sunk yet. I still get exactly the same issue with the "zoomed" or "enlarged" view and the fact that it only began happening for me after the 2.06 release. This has to do with a carrier having been sunk?
The enlarged view is exactly the same no matter what. It may be specific to my system, in which case it's not a bug. Let me know and I'll move the thread over to technical support.
-
Your screenshots look exactly like my hanger has since AHII came out.
-
same here, Hangar looks the same its normal, BUT i am unable to Select and Loadouts upon a CV that is NOT sunk. all i can do is select the aircraft or GV and launch.