Aces High Bulletin Board

General Forums => Hardware and Software => Topic started by: humble on November 17, 2005, 12:52:16 PM

Title: X-52 question
Post by: humble on November 17, 2005, 12:52:16 PM

Can you program the "slider" on the throttle to the "zoom" function? If so help or program file greatly appreciated.

Title: Slider set as zoom in/out
Post by: TMAW on November 20, 2005, 08:37:35 AM

humble I have a profile that uses the slider for zoom in and out. I e-mailed you my address, reply with your address and I'll send the profile to you.

TMAW

Title: X-52 question
Post by: Max on November 22, 2005, 08:30:29 AM

TMAW can you briefly describe how you did that? I used AH jstick setup for a basic set of views and commands.

DmdMax

Title: X-52 question
Post by: TMAW on November 22, 2005, 10:49:03 AM

I used the SST software that came with the stick. The slider was set to BANDS, then divided into three. I'm not sure of the percentages because I'm at work.
But I think that from 0 to 40% of the band  the zoom out key([) is set to it, the center of the band is from 40% to 60% with no key set to it, and the 60% to 100% uses the zoom in key(]).
I believe if you are going to use the SST software you'll need to delete the stick.cfg from AH.

TMAW

Title: X-52 question
Post by: humble on November 22, 2005, 11:54:33 AM

TMAW....

daverima@gmail.com

thanks