Aces High Bulletin Board

Help and Support Forums => Technical Support => Topic started by: humble on April 22, 2006, 01:21:36 AM

Title: need some help with warping....
Post by: humble on April 22, 2006, 01:21:36 AM
I'm using a new box (rack system XP media center)....connect looks golden but serious spiking warping....

Host Information
1, -------------- ,192.168.0.1
2,,-
3,phnx-dsl-gw05-197.phnx.qwest.net,67.40.227.197
4,phnx-agw1.inet.qwest.net,67.40.227.93
5,tmp-core-01.inet.qwest.net,205.171.129.29
6,svx-core-02.inet.qwest.net,67.14.1.58
7,svx-edge-02.inet.qwest.net,205.171.214.130
8, -------------- ,67.131.255.42
9, -------------- ,216.140.3.65
10, -------------- ,216.140.0.65
11,so-3-0-0.a1.lsan.broadwing.net,216.140.0.74
12,P3-1.a0.lsan.broadwing.net,216.140.0.106
13,brw.gw.powerpulse,67.98.235.58
14,pos1-0.core02.las.oc48a.switch2switch.com,66.209.64.218
15, -------------- ,66.209.64.186
16,marchex.demarc.switch2switch.com,66.209.87.202
17,bwvip4.las.marchex.com,66.116.109.62

Sample Information
"4/21/2006 11:08:38 PM",0,*,52,52,53,71,73,71,75,75,85,83,90,86,84,86,86
"4/21/2006 11:08:53 PM",0,*,53,54,53,72,71,72,74,N/A,N/A,85,92,86,85,86,87
"4/21/2006 11:09:08 PM",0,*,54,53,56,73,72,151,75,74,85,84,93,86,84,88,87
"4/21/2006 11:09:23 PM",0,*,51,54,53,70,149,73,73,N/A,N/A,85,90,86,86,89,86
"4/21/2006 11:09:38 PM",0,*,52,53,54,71,72,73,74,73,86,83,91,87,85,86,87
"4/21/2006 11:09:53 PM",0,*,53,53,53,72,71,72,75,N/A,N/A,82,92,86,84,87,86
"4/21/2006 11:10:08 PM",0,*,52,55,52,72,72,73,74,73,84,85,92,87,84,86,87
"4/21/2006 11:10:23 PM",0,*,52,51,53,72,71,72,75,72,85,84,89,88,85,87,86

trace does show %100 packet loss at 2nd hop?? I dont know the program so I dont know if I need to exclude initial hop or if this is issue....

Thing has way to many proccess's running but I dont know what I actually need (been along time). Any help greatly appreciated....
Title: need some help with warping....
Post by: Roscoroo on April 22, 2006, 01:35:54 AM
looks like a routor issue ...

Id email your full trace to skuzzy though just to be shure .
Title: need some help with warping....
Post by: humble on April 22, 2006, 10:48:49 AM
thanks, I will
Title: need some help with warping....
Post by: Skuzzy on April 22, 2006, 12:15:28 PM
Not unusual for QWest.  They seem to come and go quite a bit.  I would point them as this trace and have them take a look (assuming they will).

That aside, are you sure it is lag warp?  If you exhaust a resource in the system, it could manifest itself in the same manner.  Such as running out of video RAM.  Easy to do with AH if you use 1024 or 512 texture sizes, and run with skins enabled, and have AA enabled.  As an example.

Or attempt to preload skins, and you only have 1GB of system RAM (or less).  That would eat it up in a hurry.
Title: need some help with warping....
Post by: humble on April 22, 2006, 01:20:33 PM
Quote
Originally posted by Skuzzy
Not unusual for QWest.  They seem to come and go quite a bit.  I would point them as this trace and have them take a look (assuming they will).

That aside, are you sure it is lag warp?  If you exhaust a resource in the system, it could manifest itself in the same manner.  Such as running out of video RAM.  Easy to do with AH if you use 1024 or 512 texture sizes, and run with skins enabled, and have AA enabled.  As an example.

Or attempt to preload skins, and you only have 1GB of system RAM (or less).  That would eat it up in a hurry.


Skuzzy,

I was thinking the same thing, one issue I already found is the onboard sound. I've always either had a seperate card or the nvidia cs onboard. This has the older onboard sound. I bumped it back a setting and its helped. Also bumped texture res back to 512....will bump it to 128 to see if that is also an issue. I have a turtlebeach santacruz around somewhere and will pop it in as soon as I find it:)......

Thanks