Aces High Bulletin Board

General Forums => Hardware and Software => Topic started by: Pollock on May 15, 2006, 07:58:51 PM

Title: overclocking and psu stability
Post by: Pollock on May 15, 2006, 07:58:51 PM

I am noticing about a 20mv drift on my cpu while overclocking.  I have also been getting some lock ups lately so I reduced my overclock to 2.25GHZ.

What are good reccomendations for a  PSU for overclocking. Currently I have the stock PSU (raidmax) here are the ratings: 12v=13A 5V=32A 3.3V=26A.

Does anyone think a better psu would enable me to run @ 2.5GHZ stable.

Title: overclocking and psu stability
Post by: 38ruk on May 15, 2006, 10:36:47 PM

What are you running for a vcore on the 3000+ ?

Title: overclocking and psu stability
Post by: Pollock on May 16, 2006, 09:20:21 AM

i will post my bios settings when i get home from work sorry i forgot to do that.

Title: overclocking and psu stability
Post by: 38ruk on May 16, 2006, 11:07:01 AM

The reason i ask is that most of the time you will have to bump your vcore up when you get to the higher fsb settings . Cpu's are kinda funny about vcore , mine @ 2.2ghz (stock) is 1.4v , and i can run up to 2.8 stable with out adjusting it , @ 3.0 ghz i need 1.6v for stability .  That said , a good power supply is a must if you want to achive a high , stable overclock. 38

Title: overclocking and psu stability
Post by: Pollock on May 18, 2006, 06:28:24 AM

Quote

What are you running for a vcore on the 3000+ ?

I could not find a Vcore setting,

My voltage settings to adjust are

cpu voltage over 5%
mem voltage 2.75
agp voltage 1.55v

I bought a cooler master extreme power  600w PSU

and bumped it up to :

cpu 8.3 %
mem voltage 2.75
agp 1.55V

according to cpuz my voltage flucuates to 1.488 to 1.504v


my clock is now 2268.1MHZ
HTT 252 mhz
multiplier x9

I will try flying tonite and see how she runs.

These AMD 64s are more complex to overclock than a P4 that is for sure
:rolleyes:

Next thing I am adding a true temp monitor to my box the one MSI built in is not accurate...

Title: overclocking and psu stability
Post by: 38ruk on May 18, 2006, 04:45:52 PM

When overclocking a amd 64 there is also a hypertransport link to worry about . The setting for my HT link are 2x 3x 4x 5x . The HT link needs to be around 1000mhz .  With your FSB @ 252 on a stock HT link multiplier of 5X is 1260mhz . Im actually supprised it boots or is stable at that high a setting .  With a 252 fsb , your HT link should be 4X (4X252) = 1008 mhz .  That is prolly whats been holding you back . My 3700+ will not boot with an HT link speed over 1080mhz .

Edit : pollock shoot me an email @ rukkee@toast.net  if ya want , i dont mind going threw all ur settings over the phone . As you can see by my sig.  overclocking is one of my favorite pastimes . 38

Title: overclocking and psu stability
Post by: Pollock on May 19, 2006, 06:49:51 AM

38 MAW thanks for the help I may take you up on the offer.

Currently my HT freq is at 3 I will email you the rest of the specs when I get home from work, thanks again.