Aces High Bulletin Board

Help and Support Forums => Technical Support => Topic started by: redbelly on March 07, 2008, 02:00:17 PM

Title: texture settings?
Post by: redbelly on March 07, 2008, 02:00:17 PM

What size videocard do you need to run 1024 settings?  I just installed a gforce  8500gt with 512mb and can only run 512 texture.  When I change to 1024 I get a slight lag or frame freeze.  Also is there certian performance settings to help a card run better for AH.  Even now on 512 texture setting I start to loose frame rate after a few min.  Frame rate starts at around 60 then gradually drops to about 25 to 30.  Thanks for the help in advance<S>.

RedBelly
MostWanted

Title: Re: texture settings?
Post by: Skuzzy on March 07, 2008, 02:40:53 PM

There are a lot of variables involved in that question.

Are you using any other video card settings, like AA (anti-aliasing) or AF (anisotropic filtering)?
What resolution are you runnin the game at?
How much system RAM does your computer have?

Title: Re: texture settings?
Post by: redbelly on March 08, 2008, 09:58:19 AM

Im not sure what all of these do but my settings are as follows.

Anisotropic filtering                               8x
Antialiasing-Gamma correction                 on
Antialiasing-mode                                  Overide any app. setting
Antialiasing-Setting                               8x
Antialiasing-Transparency                      Supersampling
Conformant texture clamp                      off
Error reporting                                     on
Extension limit                                     off
Force mimpmaps                                  none
Mullti-display/mixed GPU                        Multiple display perf. mode
Texture filtering-A sample option             off
Texture filtering-neg. LOD bias                clamp
Texture filtering- quality                         High quality   

I have the 1024x768 res. set and 2 gigs of ram with Vista32bit.  The card I installed is a XFX Geforce 8500gt

Title: Re: texture settings?
Post by: The Fugitive on March 08, 2008, 10:44:46 AM

Vista is buggy for gaming at best anyway, but thats where you should start.

• check the thread about "Vista Tips" Skuzzy has stickyed to trim out your system
• next, did you download the hires pack? if not, then you really aren't viewing 1024 textures, but are stretching the 512s
• If you still have mini stutters, start dropping out your antialiasing back from 8X. The smoothing really takes up video ram

Title: Re: texture settings?
Post by: TwinBoom on March 09, 2008, 11:32:34 AM

change to single display unless ur multi monitors

Title: Re: texture settings?
Post by: redbelly on March 09, 2008, 10:47:40 PM

I have read skuzzy thread and trimmed my settings a while back.  I just downloaded the hires pack tonight and saved it to my HTC folder(is that the right place?).  I also Changed my display to single(thanks TwinBoom).  The game seemed to run better on 1024 with only a few freezes from time to time but I didnt notice a very big diff. in graphics. My frame rate averaged around 20 to 30.  Thanks for the advice so far guys its getting better.  Let me know if the hires pack was saved where it should be.

Title: Re: texture settings?
Post by: Krusty on March 10, 2008, 10:12:32 AM

You don't just download the hi-res pack. It's a self-extracting executable. You have to install it. Before you do that, you won't see any difference between 512 and 1024, because there is no 1024 (and it defaults back to 512). You might notice a difference after installing it, and it won't hurt to install it, but if you decide to go back to 512 you don't need to "uninstall" it or anything. Simply set the texture resolution down to 512 (or lower) and you're back to where you originally were.

Title: Re: texture settings?
Post by: redbelly on March 10, 2008, 10:47:39 AM

I could use more detials on how to install it correctly.  Sorry im a little slow on some of that stuff :o.

Title: Re: texture settings?
Post by: Krusty on March 10, 2008, 10:57:02 AM

Per the downloads page, THIS:

http://downloads1.hitechcreations.com/AHHIRES211.EXE

is the hi-res pack.

Save this file to your hard drive. Once done, double click the file. It is an executable. When done, delete said file if you wish (it is no longer needed). Start up AH. Choose 1024 texture size in the video settings. The cache will rebuild. Let it.

Title: Re: texture settings?
Post by: redbelly on March 10, 2008, 09:46:44 PM

Thanks krusty I installed the hires pack with no problem :aok.  The planes do seem to be sharper now and I am only having very slight stutters from time to time but I still have my antialiasing at 8x.  Things look allot better.  You guys have been a great help :salute.  Any other advice or tips on my settings will be greatly appreciated.  Im not sure about the res.  Is 1024x768 the best for me.  The monitor I use is a HP w2207.  Its a 22" LCD and im not sure about the details.

Title: Re: texture settings?
Post by: doc1kelley on March 12, 2008, 09:34:30 AM

Quote from: Krusty on March 10, 2008, 10:57:02 AM

Per the downloads page, THIS:

http://downloads1.hitechcreations.com/AHHIRES211.EXE

is the hi-res pack.

Save this file to your hard drive. Once done, double click the file. It is an executable. When done, delete said file if you wish (it is no longer needed). Start up AH. Choose 1024 texture size in the video settings. The cache will rebuild. Let it.

Another good idea after the cache rebuild is to do a defrag.  Actually whenever I change the video settings, I delete the cache and let it rebuild and then do a disk defragmentation.  It seems to reduce the "rubber bullet" effect.  I don't know if it really does but it just seems to.

All the Best...

    Jay
 awDoc1