Aces High Bulletin Board
General Forums => Aircraft and Vehicles => Topic started by: apcampbell on March 14, 2008, 08:45:20 AM
-
Silly question here, but in preparing for the new FSO in the A6M, I've noticed that this plane when lightly damaged, begins streaming white smoke/mist from 2 different points, the engine and wing. Is this a fuel leak for the wing and coolant leak for the engine?
-
Different colors mean different things.
Black is an oil system hit. You have a limited amount of time before your oil runs out and your engine just plain stops.
Grey is a radiator system hit. This is only on planes that have them. The A6m does not. Once your radiator is dry (very fast) your engine overheats in seconds and dies.
White is a fuel system hit. In planes with only 1 main tank this is rather serious (F4us, 109s, etc). In planes that break the fuel into 1 or more tanks, each individual tank can have a fuel leak. Those tanks will drain quickly, but the other tanks (the ones still intact) will not drain. YOu need to switch your fuel selection to the leaking tank, to use up as much of the draining gas as possible, and then when it's gone switch back to your other tanks.
CTRL+D also shows you the damage screen listing. Items in RED are damaged/destroyed.
-
just learned something new, didn't know about the CNRT-D function...Thanks!
-
YOu need to switch your fuel selection to the leaking tank, to use up as much of the draining gas as possible, and then when it's gone switch back to your other tanks.
Jeez, what a total "DUH" moment I just had after reading that. Can't count the times I've had a fuel hit and never thought to do that! Now don't get me wrong,,I would have still died in a flaming heap but at least I would have stayed in the air longer......Well,,,,,,,,,,,maybe.
Thanks for the tip Krusty :salute