Aces High Bulletin Board
General Forums => Staged Mission Editor => Topic started by: rogerdee on April 08, 2008, 02:32:01 PM
-
ive followed the insturctions in the help file
done the way points done the event segments
ive done a allied mission and a axis one
neither of them work.!!
i click on the ofline mission and it goes tobreifing then i get a you have crashed and thats it?
no take off no planes nothing!!!
ive followed the instructions and tried and treid again and still get a breifing room followed by you have crashed stright away? :mad:
-
You are probably not setting the spawn point, is my guess.
If you look at the flight properties about 1/2 down is a button "set spawn point". Zoom in on the runway then hit the spawn point button (mouse pointer will change to look like a plane) then click near the first waypoint.
-
thanks that has got it working for me.
only problem is some how i got a 110 stuck to the back of my spitfire when i take off!!!
-
If you right click on the yellow mission "thingie" at the top it has a radio button for bishop or knight. My guess is that you want the spit to be bishop and the 110 to be knight. If they are both the same they will spawn together.
-
ok i keep getting this problem of another plane from the oppiseite mission apearing and hiting my plane on take off or attaching its self tto my plane!!!!.
eg 109 taking of and a boston suddly apears and hit my plane or ataches ittself to minee and is draged around by it?
-
If you right click on the Yellow mission icon and go to mission properties. At the top you'll see two radio buttons, Bishop and Knight's. It sounds like you have both missions set to the same country. It works best to set the allied mission to Bishops and the Axis missions to Knight btw.
<S>Baumer
-
nope thats not it.
its all set up how it should be,but everytime it spawns a n m e plane near to mine and kills it!!!!
-
Do you have any arena settings or fields different from the original default settings?
Can you post your .mis file for me to look at?
-
Just spit-balling here...Did you download the new version?
-
www.rogerdee.co.uk/films/roger2.zip
here is a link to one of the mission that dont work properly
if you want to have a look any sugggestions would be greatfully recieved
www.rogerdee.co.uk/films/roger2.zip (http://www.rogerdee.co.uk/films/roger2.zip)
-
I took a look at it and here are a couple of suggestions.
First go through each segment and hit the "Fill Segment to the End" and then "Calculate" for each segment. The first screen shot is how your mission looked when I opened it.
See how the takeoff segment shoots straight up.
(http://332nd.org/dogs/baumer/Roger1.jpg)
I recalculated and this is how it looks now.
(http://332nd.org/dogs/baumer/Roger2.jpg)
Another issue is Sudz mentioned in a different thread not to use the climb segment due to some know issues. So for know change those segments to cruise. You can still climb by increasing the target altitude in the cruise properties.
One more thing is to increase the speed on your cruise segments for most planes 190 to 220 mph is a good range if you are NOT climbing. If you are climbing then use something similar to the auto-climb speed but, be sure to not go too fast. You want the other planes in the formation to be able to catch up if necessary.
Good Luck and I hope that gets you pointed in the right direction.
Baumer
-
i finaly got it to work properly,all i got to do now is work out the timing so
the enemy hits each other
-
If you look at the time next to the segments in each mission you can start to see where to adjust the waypoints to get them to "run into" each other.
Baumer
-
OK I have followed the instructions in the ME help and in the tutorial step by step. I got a simple mission completed, then when I went to AH offline practice to run it, I click on practice missions and the game crashes. So I removed the mission I created and once I did that everything runs fine. What did I miss or do wrong that my mission crashes the program? Thanks for any help.
-
First guess... the mission name may be too long.
Can you post the mission file for us to review?
-
:aok I don't know what I did different this time, but everything worked like a charm. I made a simple 1v1 mission, kept names and titles short and it works great except in the Mission editor I couldn't tell which areas where what team and if you don't reset the arena before loading the mission, you will get shot up by ground defense as soon as you spawn. :uhoh. Next I need to figure out how to put text in the briefing before takeoff. If I run into any bugs or problems I will post the file for you take a look. Thanks. My ulitmate plan is to create a series of training missions utilising the P-40.
-
:aok
-
I have a problem aswell: when I start up the miss it just stys in the breifing room any ideas?