Aces High Bulletin Board

Help and Support Forums => Technical Support => Topic started by: falcon23 on October 19, 2008, 09:46:25 AM

Title: PROBLEM with USB DRIVERS??
Post by: falcon23 on October 19, 2008, 09:46:25 AM

I ran a verifier program of which I will copy here:

5: Run Windows Driver Verifier tool:

*Close all applications.
*Start>Run> type: verifier.exe and hit Enter
*You're running this Driver Verifier utility for XP.
*Create Standard Settings>and choose "Automatically select all drivers installed on this computer"
*Proceed and see what it lists.
*If there's something wrong with a driver causing BSoD's, it'll usually give you another BSoD with the driver name included or show it: i.e. xxxxxx.sys
*Make a note of that. Look for conflict reports too.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 Now for more info..MY X-52 uncalibrates quite often and it is driving me nuts..I have a powered USB hub which it runs into,but does not seem to make a difference,I also bluescreen out with a memory dump sometimes,which says it was my saitek drivers I believe..

 SO I ran the ABOVE program and this is what I got.:

IO system verificationERROR in npusb.sys
(WDM DRIVER ERROR 21f)

[npusb.sys+6005 at BA98E005]
 
 This was the start-up bluescreen which the above tool speaks of,so I would restart the comp,well then I would get more of the ABOVE numbers..I got many of the driver errors.so many infact that I finally had to start in safe mode just to get the comp to start normally under windows..Here below are some of the other numbers I got,,I dont know if I got them all,but they all seemed to be tied up with the USB for some reason..


[npusb.sys+6005 at BA9DE005]
[npusb.sys+6005 at B9299005]
[npusb.sys+6005 at B914A005]
                             [BAA6E005]
                             [B6FC2005]
                             [B2FD1005]
                                                       
  Anyway,I am pretty confused about what this all means at this time,and am hoping someone can put me in the right direction as far as figuring out this problem..

  This is a new build,but maybe I need to reload windows or something,IO just dont know..
                                               Thanks ,
                                                    Kevin


     

Title: Re: PROBLEM with USB DRIVERS??
Post by: Getback on October 19, 2008, 11:36:36 AM

Here is what I would do. I would reinstall your drivers. Also, knowing that you put in a new MB I think I would do a complete system install if you haven't done that yet.
Another thing if you loaded the setup program for profiles I would delete it.

These are my best guesses right now.

Title: Re: PROBLEM with USB DRIVERS??
Post by: bustr on October 20, 2008, 01:32:02 PM

It's your TrackIR driver. Uninstall TrackIR and if you can download a newer version from NaturalPoint.

npusb.sys security and file info
npusb - NaturalPoint USB - NaturalPoint

Title: Re: PROBLEM with USB DRIVERS??
Post by: falcon23 on October 20, 2008, 06:53:56 PM

AHHH,thanks buster,I will do that..thanks..  :salute

                                                        Falcon23