Aces High Bulletin Board

Special Events Forums => Friday Squad Operations => Topic started by: Stoney on November 06, 2008, 09:48:05 AM

Title: Axis CIC, PM please...
Post by: Stoney on November 06, 2008, 09:48:05 AM
If the Axis CIC can send me a PM or reply here with an update on the Axis orders...  I just want to make sure they're in production.
Title: Re: Axis CIC, PM please...
Post by: RATTFINK on November 06, 2008, 05:01:43 PM
Here is their CO's e-mail add.   jimmyhooper@cableone.net

Here is their MA CO & SEA XO's e-mail add.   leiserk@yahoo.com


Do they know they have CiC duties?
Title: Re: Axis CIC, PM please...
Post by: Stoney on November 06, 2008, 05:03:58 PM
I sent the email addresses on the AH Events site a message earlier.  Still waiting for a response.
Title: Re: Axis CIC, PM please...
Post by: Nefarious on November 06, 2008, 05:17:51 PM
Time to start asking for volunteers.
Title: Re: Axis CIC, PM please...
Post by: fudgums on November 06, 2008, 05:26:40 PM
i bet jimmy hasnt been on lately. I dont see him on that much anyway
Title: Re: Axis CIC, PM please...
Post by: Dantoo on November 06, 2008, 05:52:46 PM
I had a look at the objectives to see if there was anything I could do.

  There isn't any table of players available.
Also looking at the required numbers, min/max, I can't see anybody being able to write a reasonable set of orders unless Axis has 270 or more players assigned?

If that's not the case, it's not a great week to be CIC.
Title: Re: Axis CIC, PM please...
Post by: Stoney on November 06, 2008, 06:19:13 PM
Axis has in excess of 275 assigned if 80% of the squad commitment shows up.  That's the FSO average lately, so that's what the numbers were based on.

1HungLo was in the TA on Saturday before BoB while I was in there setting my sticks up.  Anyway, I suppose it is time to solicit for volunteers.

For the most part, this shouldn't be a terrribly complex set of orders to put together.

Anyone want to jump on a hand grenade?
Title: Re: Axis CIC, PM please...
Post by: Hamltnblue on November 06, 2008, 06:33:58 PM
I can help if anyone else wants to join in, other squad or whoever.  I have till 10:30est to hit the sack.  :salute
Title: Re: Axis CIC, PM please...
Post by: Hamltnblue on November 06, 2008, 06:34:39 PM
We also have a teamspeak server that can be used to coordinate
Title: Re: Axis CIC, PM please...
Post by: Stoney on November 06, 2008, 06:38:00 PM
I need a single entity to put 'em together.  Thanks for the offer to collaborate HamiltonBlue, but unity of command will make this more efficient.  If you want the whole smash you can have it.  Otherwise, I need to keep shopping.

If I don't have a solo volunteer by 9:00 EST, I'll do them myself tonight.
Title: Re: Axis CIC, PM please...
Post by: Dantoo on November 06, 2008, 06:46:08 PM
send me the force distribution and I'll let you know in 5 mins
Title: Re: Axis CIC, PM please...
Post by: TUK on November 06, 2008, 06:49:10 PM
I am short my xo and map maker.  I would be happy to help in anyway i can. Would be willing to give my phone number and help as much as possible..
Title: Re: Axis CIC, PM please...
Post by: Stoney on November 06, 2008, 06:49:25 PM
I'm still at work on the West Coast.  I'll be home in 30 minutes or so, and will have access to my materials.  Should be a list of Axis squads available on www.ahevents.org and a list of the min/max aircraft in the description.  Was there something not included in the objectives you received?
Title: Re: Axis CIC, PM please...
Post by: TUK on November 06, 2008, 06:52:55 PM
5-7 squads havent updated there ride request.. Including the cic.  Perhaps this should have been adressed earlier in the week..  :huh
Title: Re: Axis CIC, PM please...
Post by: Hamltnblue on November 06, 2008, 06:53:58 PM
I'm creating a spreadsheet with squads, commitment and preferred rides
Title: Re: Axis CIC, PM please...
Post by: Dantoo on November 06, 2008, 06:57:15 PM
Just used to having the table as part of the setup.

I have it now and can put together a plan to be distributed in about 3 hours.

Title: Re: Axis CIC, PM please...
Post by: Hamltnblue on November 06, 2008, 07:05:14 PM
Spreadsheet is done using info from ahevents.  As noted before, many not updated, and are set to allied planeset.  Also other info noted for private pm.
Dantoo if you're doing it send me your email and I'll send you excel sheet
Title: Re: Axis CIC, PM please...
Post by: J312 on November 06, 2008, 07:10:31 PM
I had no idea that we were CiC this time around. Just found out like 20 minutes ago. If any one has the time and wants to set up the orders go for it.

>S<
Title: Re: Axis CIC, PM please...
Post by: TUK on November 06, 2008, 07:14:14 PM
13MPG will fill any spot needed for completion of orders..  :salute
Title: Re: Axis CIC, PM please...
Post by: Hamltnblue on November 06, 2008, 07:24:44 PM
In the absense of anyone taking over I'm continuing spreadsheet with potential assignments that can be turned over to whoever winds up with it.
Title: Re: Axis CIC, PM please...
Post by: Dantoo on November 06, 2008, 07:32:02 PM
Absent Stoney saying yay or nay I have commenced writing a set of orders.

Thanks for the offers of help but I am now well advanced and most of it is simply typing now.  If Stoney gives the go-ahead I will distribute asap.




PS it will be difficult to provide the requested sherman and la5 rides but I will do what I can.   ;)

Title: Re: Axis CIC, PM please...
Post by: 68falcon on November 06, 2008, 07:32:41 PM
Just used to having the table as part of the setup.

I have it now and can put together a plan to be distributed in about 3 hours.



Thank you Dantoo  :rock
Title: Re: Axis CIC, PM please...
Post by: Stoney on November 06, 2008, 07:33:58 PM
If Stoney gives the go-ahead I will distribute asap.

Thanks Dantoo, you may proceed sir...
Title: Re: Axis CIC, PM please...
Post by: 68falcon on November 06, 2008, 07:34:12 PM
Absent Stoney saying yay or nay I have commenced writing a set of orders.

Thanks for the offers of help but I am now well advanced and most of it is simply typing now.  If Stoney gives the go-ahead I will distribute asap.




PS it will be difficult to provide the requested sherman and la5 rides but I will do what I can.   ;)



Dantoo you have permission to go ahead with the orders.

I can do that now that I am Lead CM for the FSO team

and seeing that Stoney has everything well in hand I can go hide again
Title: Re: Axis CIC, PM please...
Post by: Hamltnblue on November 06, 2008, 07:41:07 PM
Luftmorder gets potato peeling duty in the mess hall. :aok
Title: Re: Axis CIC, PM please...
Post by: J312 on November 06, 2008, 08:50:01 PM
Rgr on the KP duty.  :O Sorry to all on the axis side for the mix up. Still trying to figure out what happened. No emails on my end for whatever reason.

>S<
Title: Re: Axis CIC, PM please...
Post by: Hamltnblue on November 06, 2008, 09:35:50 PM
Dantoo check message.  :salute
Title: Re: Axis CIC, PM please...
Post by: Dantoo on November 06, 2008, 09:59:30 PM
Axis Orders sent.

Thanks Hamltnblue for doing the document checks for me.

If major issues come to light, I will correct and resend in good time before frame start.

rgds
Title: Re: Axis CIC, PM please...
Post by: AKDogg on November 06, 2008, 10:09:53 PM
not blaming anyone here but something needs to be done.  This is becoming more of a occurence and needs to put a stop to it.  CIC's should be notified via PM, email, through squad members, maybe even by phone if necessary the day the Sides are picked and CIC's.
Title: Re: Axis CIC, PM please...
Post by: Hamltnblue on November 06, 2008, 10:15:31 PM
Another message and email sent Dantoo.
Thanks for picking up the ball
 :salute
Title: Re: Axis CIC, PM please...
Post by: 68falcon on November 06, 2008, 10:28:13 PM
not blaming anyone here but something needs to be done.  This is becoming more of a occurence and needs to put a stop to it.  CIC's should be notified via PM, email, through squad members, maybe even by phone if necessary the day the Sides are picked and CIC's.

You are correct and this is being worked on.
Title: Re: Axis CIC, PM please...
Post by: Marshal on November 06, 2008, 11:16:27 PM
Axis Orders sent.

Thanks Dantoo for picking up the slack.
Orders received and understood.
<S>
Title: Re: Axis CIC, PM please...
Post by: Newman on November 07, 2008, 01:51:31 AM
Orders received and understood.

 :salute
Title: Re: Axis CIC, PM please...
Post by: CHAPPY on November 07, 2008, 08:52:08 AM
received and understood  :salute
Title: Re: Axis CIC, PM please...
Post by: ELD66 on November 07, 2008, 11:48:06 AM
Received and Understood.
 :salute
Title: Re: Axis CIC, PM please...
Post by: Chapel on November 07, 2008, 02:33:58 PM
Orders recieved and understood.