Aces High Bulletin Board
Help and Support Forums => Help and Training => Topic started by: mike8318 on November 18, 2008, 10:25:16 AM
-
For some strange reason my thottle lever will not get me to 100% power. I continually lag behind on bomber missions,and it's a little annoying to my squadmates to have to throttle back so I can keep up. Any way to tweak this in in AH,or is it a Windows setting?
-
You need to make sure it is calibrated in windows.
A little trick is to not take it all the way up when you calibrate it in game. I put a paper clip at the stop so it stops just a bit short, but at the same place ever time. This will make sure when take it all the way up, you get to / past the 100% mark every time.
Regards,
Hammer
-
Thank you Hammer, I am having the same trouble, I could tell by going to the E6B to see if I was getting full Military power and I wasn't. I have a feeling, this is going to help me out a little from now on. :salute
-
Make sure that whenever you calibrate your entire joystick, you do so to the throttle as well (well all analogue inputs for that matter - as if you have one mapped to RPMs, not calibrating that with the rest can cause problems).
<S>
Yossarian
-
Nice tip Hammer, i got the same problem as well, I'll try the paper clip trick to see if that works for me :aok
-
Note to all - remove paperclip after calibration! :D
-
You need to make sure it is calibrated in windows.
A little trick is to not take it all the way up when you calibrate it in game. I put a paper clip at the stop so it stops just a bit short, but at the same place ever time. This will make sure when take it all the way up, you get to / past the 100% mark every time.
Regards,
Hammer
I recalibrated it last night,and we'll see how it works tonight.Thanks for the help!