Aces High Bulletin Board
Help and Support Forums => Help and Training => Topic started by: Chapel on May 08, 2009, 11:43:37 PM
-
I did a search and there was one thread, out of date with a broken link.
But i'm having an issue when I go to pull the trigger with my gun sight bouncing when I'm pulling in on a contact.
How do I fix this?
-
It's likely one of the axises causing this,I'd suspect the rudder.
You may want to try some dampening or enable scaling and adjust the axis so a trigger pull doesnt activate it.
also look at pitch axis as that might be a problem too.
-
Chapel I had seen that you already read and responded to a similiar thread that Murdr had replied to. I was a thread named "Bounce and Joystick" by Gaspode. Take another read of it and follow Murdr's link to Ack Ack's stick settings. Try those and if you have anymore trouble shoot me a private mail (pm) and let's get together to work thru it in the Training Arena.
Hope this helps.
Ren
Aces High Training Corps
-
Copy Ren, I tried one of the links there, but the link was no longer valid. I'll re-read and recheck it if you say it works.
Thakns
-
Also if it is a joystick bouncing, and a cheapo stick, Time for new stick.
-
If you can't find the write up or the link is bad. Go to the AH Trainers page or Hammer's www.netaces.org (http://www.netaces.org). On both sites, you should be able to find a write up on stick scaling.
Obie