Aces High Bulletin Board

General Forums => Terrain Editor => Topic started by: bravoa8 on October 29, 2009, 03:57:58 PM

Title: "tenspots map" done!
Post by: bravoa8 on October 29, 2009, 03:57:58 PM
I've finally finished my tenspots map,I've tested all the gv spawns and they all work. I haven't looked at all the convoys but, im sure they make it to their place safely,besides its probably going to be for offline missions anyway or if they get H2H back. :x Also if you take a bsae from the bish it says the knights win the war :lol oh well like i said it will be used for offline missions I'll make a mission for it soon.Its supposed to be AvA type map Japenese are the knights and Allies are the bish. :salute all.

http://www.mediafire.com/download.php?hgzcyi0mm4m

(http://farm3.static.flickr.com/2502/4055952659_26fe21e931_o.jpg)

The pink dots are suposed to be spawns.
Title: Re: "tenspots map" done!
Post by: USRanger on October 29, 2009, 06:49:43 PM
I'll check it out Bravo. :aok
Title: Re: "tenspots map" done!
Post by: bravoa8 on October 29, 2009, 07:54:50 PM
I'll check it out Bravo. :aok
:)
Title: Re: "tenspots map" done!
Post by: bravoa8 on October 30, 2009, 10:58:53 PM
Has anyone downloaded it?? :noid .... Or is it too small?
Title: Re: "tenspots map" done!
Post by: StokesAk on November 02, 2009, 06:01:15 PM
I have it downlaoded, ill take a look at it when i have a chance, im very busy.
Title: Re: "tenspots map" done!
Post by: bravoa8 on November 02, 2009, 09:12:25 PM
I have it downlaoded, ill take a look at it when i have a chance, im very busy.
:) Hope you like it. :banana:
Title: Re: "tenspots map" done!
Post by: bravoa8 on November 12, 2009, 09:18:02 PM
Feedback?...Anyone??
Title: Re: "tenspots map" done!
Post by: bravoa8 on November 29, 2009, 09:44:39 AM
Anyone?!?! No Feedback?!!? :confused: Is it too small?
Title: Re: "tenspots map" done!
Post by: USRanger on November 29, 2009, 10:39:37 PM
It'll work for offline missions.  You have included all the needed requirements for a working terrain.  You did a good job on the actual terrain work i.e. shorelines, rocky cliffs, ect.  There are a few things I noticed.  All 3 of your HQs are on the western edge of your terrain, two are only a sector apart.  I flew out of A2 & noticed the supply train down on the coast stuck because the cliff in front of it to factory was too sharp.  You have some one-sided spawns set up also where one side could defend a field/strat, but there is no way for enemy GVs to attack.  Those are just a few things to remember on your next terrain.  Nice work. :aok
Title: Re: "tenspots map" done!
Post by: bravoa8 on November 29, 2009, 10:48:09 PM
It'll work for offline missions.  You have included all the needed requirements for a working terrain.  You did a good job on the actual terrain work i.e. shorelines, rocky cliffs, ect.  There are a few things I noticed.  All 3 of your HQs are on the western edge of your terrain, two are only a sector apart.  I flew out of A2 & noticed the supply train down on the coast stuck because the cliff in front of it to factory was too sharp.  You have some one-sided spawns set up also where one side could defend a field/strat, but there is no way for enemy GVs to attack.  Those are just a few things to remember on your next terrain.  Nice work. :aok
Thx for checking it out I didn't really check the supply trains but, since this is my first map it'll be for offline missions.The rooks are just a team on this map its supposed to be AvA style thats why their HQ is close. And do you think I did too much on the shorelines?
Title: Re: "tenspots map" done!
Post by: USRanger on November 29, 2009, 11:13:18 PM
You don't have to have 3 HQs.  You don't have to have any HQs or strats at all (for a non-MA terrain) if you don't want to.  If your terrain is supposed to be 2-sided, build it that way.  Then, when your terrain is built, simply load it offline and change any rook fields to bishop or knight then hit save.  This gives you that field setup as a .fld file in your AHTERR folder.  Just send that .fld file along with the .res file when you put out terrains and it will be preset for players as 2-sided when they go to fly on it. :salute
Title: Re: "tenspots map" done!
Post by: bravoa8 on November 30, 2009, 11:00:22 AM
You don't have to have 3 HQs.  You don't have to have any HQs or strats at all (for a non-MA terrain) if you don't want to.  If your terrain is supposed to be 2-sided, build it that way.  Then, when your terrain is built, simply load it offline and change any rook fields to bishop or knight then hit save.  This gives you that field setup as a .fld file in your AHTERR folder.  Just send that .fld file along with the .res file when you put out terrains and it will be preset for players as 2-sided when they go to fly on it. :salute
Really? Cool! Never knew it thanks for the tip. :salute
Title: Re: "tenspots map" done!
Post by: JonDoe999 on December 23, 2009, 12:59:09 PM
This terrain is instersting. I hope to see more from you, sir. :salute




P.S.: Have a safe and wonderful Christmas!!! :cheers: :x