Aces High Bulletin Board
General Forums => Hardware and Software => Topic started by: Viper0070 on December 16, 2009, 06:52:06 AM
-
Good morning Members...I was hoping maybe someone here in Aces High could help me Please. My wife bought me a trackir-5 for my 62 birthday on Sunday the 13th ....I am really getting old hehe..I got it working a little last night...I see that some of you have yours working good and thought Maybe you might Help this Old Man with His? If you Don't mind Shairing your profile with me and any other Help that would be Great and you can always send me a email to snasur@cfl.rr.com I Thank you Members for any Help you can give me.....Have a Great week..Sammie-Viper :)
-
Viper,
Do a search on TrackIR and you will find a lot of Information and some of the profiles etc...
Cheers
-
I'm not aware of a a single native track 5 profile up as of yet.
Here is the one I'm using, which is based on Mace's I believe. It's a track4 converted over to track 5 software...I don't know if it works with trackV hardware since I have 4.
http://www.az-dsl.com/snaphook/AH2.xml (http://www.az-dsl.com/snaphook/AH2.xml)
-
Humble Thank you and have a Great Weekend....Sammie-Viper :)
-
I would suggest finding Mace's profile and working from there.
http://trainers.hitechcreations.com/files/mace/Track IR PDF.pdf (http://trainers.hitechcreations.com/files/mace/Track IR PDF.pdf)
Hope you get it tuned and working well.
Enjoy!
-
Be sure that the physical setup of the camera and reflectors allows tracking without any dead spots.
Check that you have the trackclip or reflector selected to match what you are using. The trackclip has the 3 LEDs.
I set speed to 1.6 and smoothing to 20. These are a personal preference, you might want to use different settings.
-
i have a problem downloading from www,freetrack.net well it downloads but wont run
-
You probity got a anti virus program blocking it .
-
How are finding the track IR viper started using it track IR.
-
I dont know how to copy and send my profile anyone know how???
-
Look in your TrackIR/profiles folder. Zip the profile you want and attach it to an email.
-
Thank you so much for all your help and for the Profile for my Trackir....I hope you and your Family's have a Happy New Years and may your 2010 be the Best Year Ever.....Sammie-Viper :)
-
I was going to say,
I dont use any profile, I use track IR 5 set to flight sim. and thats it.
-
I play with the smooth defaul profile except changed speed to 1.6 and smoothing to 20. I also d/l maces profile but not used to it and makes me dizzy. either way thanks for posting guys, game is so much fun with it.
semp
-
Good morning. First I want to Thank all of you here in Aces High that have Helped me with all my Question's and for the Profiles that were sent to me for my Trackir 5. from all of you. That was so very Kind of all of you. I have a few more Questions that maybe someone could Please Help me with. On my Trackir-5 does it have Vector tracking? or just Dot tracking mode? With Trackir-5 is there a way that I can use the view settings that i have saved with F10 in Aces High for the different planes with my Trackir-5? What I am trying to do is, I would like if it is possible in my Trackir 5 to move the gun sight up just a little or maybe the seat of the plane up a little in my Trackir 5? I have tried Page up and Page down while i have my Trackir 5 on and that does not work. I Thank All of you for any Help you can give me with this. Have a Great Weekend and a Great 2010. Sammie-Viper :)
-
Thanks for asking these question's Viper0070 , I have one otw and I will be watching your thread ...Have a great New Year too !! :salute
-
You could move to the position you want and then center Trackir this would save that position. Then move back to your normal way of sitting.
-
Good morning. First I want to Thank all of you here in Aces High that have Helped me with all my Question's and for the Profiles that were sent to me for my Trackir 5. from all of you. That was so very Kind of all of you. I have a few more Questions that maybe someone could Please Help me with. On my Trackir-5 does it have Vector tracking? or just Dot tracking mode? With Trackir-5 is there a way that I can use the view settings that i have saved with F10 in Aces High for the different planes with my Trackir-5? What I am trying to do is, I would like if it is possible in my Trackir 5 to move the gun sight up just a little or maybe the seat of the plane up a little in my Trackir 5? I have tried Page up and Page down while i have my Trackir 5 on and that does not work. I Thank All of you for any Help you can give me with this. Have a Great Weekend and a Great 2010. Sammie-Viper :)
With the TrackIr on the head positions are not used, because your actual head is constantly moving them. If you're wanting to sit a bit higher in the seat and have a better over the nose view, you'll need to adjust where you're sitting and then mark that as the center. For example, I hunch over a little bit and lean forward a little and center mine. Then when I sit back up to normal the TIR sees me as sitting somewhat back and higher than the default center point. That way I have a little better over the nose view, and when I lean forward and turn my head to get a 6 view, I'm about as far from the seat and armor as is possible so I get a wider field of vision to my 6 o'clock. I hope I've described that in a way that makes sense.
TrackIR won't move the gunsight at all, nor will it be able to in the slightest. What you can do though is change your viewpoint so that you get a different view of the sight. The sight just marks where the bullets will go if you're flying straight and level. Also keep in mind that your head is restricted by the limits of the canopy. I fly the 109 mostly and you really can only get so high a view in that thing, the canopy restricts your over the nose view. In a plane like the Brewster for example, you can set your head position so that it seem like you're just about standing up and flying.
Hope that helped.
-
This subject (head height as you move back and forward)is a constant source of annoyance to me and you guys have suggested the only work arounds I know.
Because the track IR sensor is either on top of or under the screen then as you move head forward or back the relative height of your head changes........... :cry
It would be neat if the guys at natural point could allow us to set an axis that was not relative to the sensor..............
e.g we move our head forward and click reference 1 for centering we move our head back and click reference 2 for centering and save the two points.
Then as we move our head back and forth along this axis we would always be centered and our other head movements are reproduced against this with respect to our various profiles.
Skuzzy please move this to Natural Points BB wish list if you so desire............ :devil
-
You can turn off any axis in the TIR profile. If you don't want your head to move up and down, or tilt side to side, just turn off or severely flatten the axis.
-
I center first then use zoom function in ah to shoot. That way I don't move head forward. It improves my aim.
Semp
-
Good morning. I want to Thank all of you for your Help and for taking the time to Reply to my Questions. Have a Great week and a Great 2010. Sammie :)