Aces High Bulletin Board

General Forums => Hardware and Software => Topic started by: hornet36 on January 28, 2010, 05:48:58 PM

Title: another X-52 problem
Post by: hornet36 on January 28, 2010, 05:48:58 PM

i recently dumped years of crap from my pc and re-installed windows xp...i downloaded AHII, setup stick but now it seems when i go fwd and backwards with the stick it moves control left and right...side to side is up and down.. :joystick: i have uninstalled reinstalled stick,updated driver..messed around in settings with yaw,axis etc...kid lost cord from throttle to joystick but am using a ps2 cord...any ideas how to correct this

Title: Re: another X-52 problem
Post by: kilz on January 28, 2010, 06:17:17 PM

have you tried remapping it in the game?

Title: Re: another X-52 problem
Post by: Ghosth on January 28, 2010, 08:20:23 PM

Did you check calibration in windows first?

Title: Re: another X-52 problem
Post by: Dragon on January 28, 2010, 10:03:34 PM

I know invert axis is an option, but I think it's only to reverse each axis, like push forward to go up and back to go down.  I think it's a windows setting thing.

Title: Re: another X-52 problem
Post by: hornet36 on January 29, 2010, 03:47:17 PM

i re-mapped everything,buttons views,etc..took off in auto ended up crashing after turning to intercept a con...calibrated stick in windows...where should i look in windows to find a problem....btw thanks for your help guys

Title: Re: another X-52 problem
Post by: Eagler on January 29, 2010, 04:08:59 PM

if the X / Y axis window in control panel/game controller/Saitek X52 Flight Control System shows the stick acting properly - I think your issue isn't with windows but in AH.
if it is screwy there then its not your AH setup. Have you tried a different USB port? powered usb hub? it might be the usb cable you are connecting the stick to the throttle with.. are you sure you can use that?

Title: Re: another X-52 problem
Post by: gldnbb on February 01, 2010, 01:43:18 PM

Posted in another thread,  but  after flying in Warbirds last night and coming back to Aces High,  the rudder pedals don't calibrate properly.  When rudders are centered,  the game  forces the rudder off to the left (right ball all the way to right).   Also,  the elevator will not level out,  the airleron slightly rolls.

I reinstalled drivers, .jsm file, and calibrated in the game.    The only thing that works to counteract these forces, is by flying with combat trim ON.   However, the combat trim disengages from time to time.

What could be wrong?   My X52 pro with saitek rudder pedals were working fine in AH before Warbirds.

(and don't give advice to stop flying Warbirds,  that is not an option, heh!)


Thanks everyone,