Aces High Bulletin Board

General Forums => Aircraft and Vehicles => Topic started by: Traveler on March 06, 2010, 03:43:12 PM

Title: P38G appears to yaw to the left when applying take off power.
Post by: Traveler on March 06, 2010, 03:43:12 PM: Has anyone noticed that the P38G model yaws to the left during take off roll and requires application of right rudder to hold the center line of the runway?

I thought all three models P38G, J and L had counter rotating props. It is not necessary to hold right rudder for either the P38J or L model, only the P38G appears to yaw left during application of full power.
Title: Re: P38G appears to yaw to the left when applying take off power.
Post by: Motherland on March 06, 2010, 03:57:10 PM: Just tried it and it doesn't yaw for me.
Check your trim settings maybe.
Title: Re: P38G appears to yaw to the left when applying take off power.
Post by: Bronk on March 06, 2010, 04:07:48 PM: here we go........ again. :rolleyes:
Title: Re: P38G appears to yaw to the left when applying take off power.
Post by: cactuskooler on March 06, 2010, 04:09:53 PM: Make sure your not carrying a single droptank.
Title: Re: P38G appears to yaw to the left when applying take off power.
Post by: FLS on March 06, 2010, 04:28:49 PM: Traveler see my reply in Help and Training and my post in the bug forum. We don't need this posted in every forum.
Title: Re: P38G appears to yaw to the left when applying take off power.
Post by: Guppy35 on March 07, 2010, 12:01:23 AM: Mine seems to roll just fine on take off and the 38G is all I fly for the most part. Now on landing it's another story :)
Title: Re: P38G appears to yaw to the left when applying take off power.
Post by: SIK1 on March 07, 2010, 12:25:57 AM: Dan your 38 seems too roll just fine on landing, as well as flip, spin, twist, break apart, and burn. :O

Of course those are your good landings. :D
Title: Re: P38G appears to yaw to the left when applying take off power.
Post by: Traveler on March 07, 2010, 01:33:24 PM: I discovered the problem, it was with my peddles, not sure why it only showed up on the G model, but I was able to clean them and recalibrate.